Abstract
The paper considers polymer composite materials based on basalt, carbon and glass fibers. Multilayer carbon nanotubes and gamma irradiation are used to modify these materials. The effect of modification on the strength of materials by determining the tensile strength of the samples is investigated. EDT-10P epoxy resin was used as a binder. The strength properties of the materials by under consideration are compared. An increase in the breaking load by 30% was observed for samples that were modified with nanotubes in relation to unmodified irradiated samples made of UTM49-12K-EP carbon fiber. The hardening of the samples modified by gamma irradiation with a dose of 10 MRad was also recorded at 8%.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kablov, B.N.: Modern materials- the basis of innovative modernization of Russia. Metals Eur. 3, 10–15 (2012)
Gumenyuk, N.S., et al.: Application of composite materials in shipbuilding. Mod. Sci.-Intensive Technol. 116–117 (2013)
Weng, D., et al.: The influence of Buckminsterfullerenes and their derivaties on Polymer properties. Eur. Polym. J. 35, 867–878 (1999)
Yurkov, A.L., Malahov, A.P., Avdeev, V.V.: Carbon living cathode materials for aluminum production by electrolysis-issues of improving properties. New Refract. 1, 9–13 (2020)
Shornikova, O.N., Maksimova, N.V., Avdeev, V.V.: Carbon materials for electrochemical capacitors. Lomonosov Moskov State University Publishing House, Moskov (2010)
Yeletsky, A.V.: Mechanical properties of carbon nanostructures and materials based on therm. Adv. Phys. Sci. 177(3), 233–274 (2007)
Tatarinseva, O.S., Zimin, D.E., Samoylenko, V.V.: Optimization of the formulation of an epoxy binder for the manufacture of glass and basalt-plastic reinforcement. Polzunovsky Vest. 3, 263–267 (2013)
Tatarinseva, O.S., Zimin, D.E., Samoylenko, V.V.: The effect of modification on the technological and mechanical properties of the epoxy binder. Mech. Compos. Mater. Struct. 21(4), 489–500 (2015)
Zimin, D.E.: Nanomodification of epoxy binder for the creation of basalt plastics with improved performance properties. Polzunovsky Vest. 3, 282–285 (2013)
Starovoitova, I.A.: Study of the physical and mechanical characteristics of nanomodified basalt roving and composite material based on it. Izv. Kazanskogo GASU 3, 217–222 (2016)
Andrews, R., Jacques, D., Qian, D., Rantell, T.: Multiwall carbon nanotubes: synthesis and application. Acc. Chem. Res. 35, 1008–1017 (2002)
Rakov, V.G.: Chemistry and application of carbon nanotubes. Adv. Chem. 70(10), 934–973 (2001)
Ginzburg, B.M., Tuichiev, Sh., Rashidov, D., Tabarov, S., Ivanchenko, P.I.: The effect of multi-walled carbon nanotubes on the strain curves under tension of polymer amorphous-crystalline thermoplastics. Lett. Tech. Phys. 36(17), 54 –60 (2010)
Gerasimov, G.Ya.: Radiation stability of carbon nanostructures. J. Eng. Phys. Thermophys. 83(2), 393–400 (2010)
Tatarintscva, O.S., Zimin, D.E., Khodakova, N.N.: The role of surface effects at the filler-binder in the forming of the mechanical characteristics of plastics. Int. Polym. Sci. Technol. 41(5), 17–20 (2014)
Kadykova, Y., Berdikhin, P.A., Arzamassev, S.V., Kalganova, S.G.: Complex-modified basaltoplastics. Bull. Voronezh GUIR 80(2), 297–301 (2018)
Kliuev, A., Klestov, R., Stolbov, V.: Physical and Mechanical Properties of a Metal Material Based on Deep Learning. J. Digit. Sci. 2(1), 18-28. https://doi.org/10.33847/2686-8296.2.1_2.
Oniskiv, V.D., Stolbov, V., Khatiamov, R.К: On one control problem of the process of gamma irradiation of the polyethylene. Appl. Math. Control Sci. 3, 119–130 (2019)
Oniskiv, V., Stolbov, V., Oniskiv, L.: Optimization of the processing of functional materials using gamma irradiation. In: Antipova, T., Rocha, Á. (eds.) DSIC 2019. AISC, vol. 1114, pp. 489–498. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-37737-3_42
Acknowledgments
This work was supported by the Government of the Perm Region in the framework grant № C-26/581.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Makarevich, Y.L., Oniskiv, V.D., Stolbov, V.Y. (2022). Effect of Modification on Strength Properties Functional Composites. In: Antipova, T. (eds) Comprehensible Science. ICCS 2021. Lecture Notes in Networks and Systems, vol 315. Springer, Cham. https://doi.org/10.1007/978-3-030-85799-8_40
Download citation
DOI: https://doi.org/10.1007/978-3-030-85799-8_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-85798-1
Online ISBN: 978-3-030-85799-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)