Abstract
Nowadays air pollution created by chemical gaseous pollutants becomes the major concern for the adverse effect on human health, plant or animal life, or the welfare of man. Thus miniaturized low-cost sensor device based on nanomaterials can be introduced for an observable signal, or warning bell may be set to control the pollution level of outdoor as well as indoor air. Exploring the present state-of-the-art inorganic, organic, or even hybrid nanomaterials used as receptor in chemical sensors to detect the pollutants in the air is briefly considered here.
In that goal, the utility of the various nanomaterials is focused in the sensing of various air pollutants. Among those, the nanomaterials receptors like metal and metal oxide semiconductors, solid electrolytes, insulators, catalytic materials, polymers, etc. including their hybrid nanomaterials have been considered here. The synthesis and required properties of the nanomaterials for the sensing application of specific gaseous pollutants are discussed in brief. The discussion also highlights the activity of nanomaterials for the improvement of sensing performance of existing sensor. Finally the important example of air pollutant sensor based on various nanomaterials is represented elaborately, and challenges for the future development are outlined in this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Acharyya D, Saini A, Bhattacharyya P (2018) Influence of rGO cladding in improving the sensitivity and selectivity of ZnO nanoflowers-based alcohol sensor. IEEE Sensors J 18:1820–1827. https://doi.org/10.1109/JSEN.2018.2790084
Adhikari B, Kar P (2010) Polymers in chemical sensors. In: Korotcenkov G (ed) Chemical sensors, vol 3. Momentum Press LLC, New York, pp 1–76
Al-Hadeethi Y, Umar A, Al-Heniti SH, Kumar R, Kim SH, Zhang X, Raffah BM (2017a) 2D Sn-doped ZnO ultrathin nanosheet networks for enhanced acetone gas sensing application. Ceram Int 43:2418–2423. https://doi.org/10.1016/j.ceramint.2016.11.031
Al-Hadeethi Y, Umar A, Ibrahim AA, Al-Heniti SH, Kumar R, Baskoutas S, Raffah BM (2017b) Synthesis, characterization and acetone gas sensing applications of Ag-doped ZnO nanoneedles. Ceram Int 43:6765–6770. https://doi.org/10.1016/j.ceramint.2017.02.088
Athawale AA, Bhagwat SV, Katre PP (2006) Nanocomposite of Pd–polyaniline as a selective methanol sensor. Sensors Actuators B Chem 114:263–267. https://doi.org/10.1016/j.snb.2005.05.009
Beguin F, Frackowiak E (2010) Carbons for electrochemical energy storage and conversion systems. CRC Press, Boca Raton
Bekyarova E, Davis M, Burch T, Itkis ME, Zhao B, Sunshine S, Haddon RC (2004) Chemically functionalized single-walled carbon nanotubes as ammonia sensors. J Phys Chem B 108:19717–19720. https://doi.org/10.1021/jp0471857
Bergaya F, Lagaly G (2001) Surface modifications of clay minerals. Appl Clay Sci 19:1–3. https://doi.org/10.1016/S0169-1317(01)00063-1
Bhuyan M, Samanta S, Kar P (2018) Selective sensing of methanol by poly(m-aminophenol)/copper nanocomposite. Electron Mater Lett 14:161–172. https://doi.org/10.1007/s13391-018-0010-9
Bi HC, Yin KB, Xie X, Ji J, Wan S, Sun LT, Terrones M, Dresselhaus MS (2013) Ultrahigh humidity sensitivity of graphene oxide. Sci Rep 3:2714–2720. https://doi.org/10.1038/srep02714
Bittencourt C, Felten A, Espinosa EH, Ionescu R, Llobet E, Correig X, Pireaux JJ (2006) WO3 films modified with functionalised multi-wall carbon nanotubes: morphological, compositional and gas response studies. Sensors Actuators B Chem 115:33–41. https://doi.org/10.1016/j.snb.2005.07.067
Cantalini C, Valentini L, Armentano I, Lozzi L, Kenny JM, Santucci S (2003) Sensitivity to NO2 and cross-sensitivity analysis to NH3, ethanol and humidity of carbon nanotubes thin film prepared by PECVD. Sens Actuators B 95:195–202. https://doi.org/10.1016/S0925-4005(03)00418-0
Carotta MC, Cervia A, di Natale V, Gherardi S, Giberti A, Guidi V, Puzzovio D, Vendemiati B, Martinelli G, Sacerdoti M, Calestani D, Zappettini A, Zha M, Zanotti L (2009) ZnO gas sensors: a comparison between nanoparticles and nanotetrapods-based thick films. Sensors Actuators B Chem 137:164–169. https://doi.org/10.1016/j.snb.2008.11.007
Chandra MR, Reddy PSP, Rao TS, Pammi SVN, Kumar KS, Babu KV, Kumar CK, Hemalatha KPJ (2017) Enhanced visible-light photocatalysis and gas sensor properties of polythiophene supported tin doped titanium nanocomposite. J Phys Chem Solids 262:655–663. https://doi.org/10.1016/j.jpcs.2017.02.014
Chang SJ, Hsueh TJ, Chen IC, Huang BR (2008) Highly sensitive ZnO nanowire CO sensors with the adsorption of au nanoparticles. Nanotechnology 19:175502–175506. https://doi.org/10.1088/0957-4484/19/17/175502
Chang SP, Chang SJ, Lu CY, Li MJ, Hsu CL, Chiou YZ, Hsueh TJ, Chen IC (2010) A ZnO nanowire-based humidity sensor. Superlattice Microst 47:772–778. https://doi.org/10.1016/j.spmi.2010.03.006
Chen Y, Zhu C, Wang T (2006) The enhanced ethanol sensing properties of multi-walled carbon nanotubes/SnO2. Nanotechnology 17:3012–3017. https://doi.org/10.1088/0957-4484/17/12/033
Chen M, Wang Z, Han D, Gu F, Guo G (2011) High-sensitivity NO2 gas sensors based on flower-like and tube-like ZnO nanomaterials. Sensors Actuators B Chem 157:565–574. https://doi.org/10.1016/j.snb.2011.05.023
Chen Z, Wang Y, Shang Y, Umar A, Xie P, Qi Q, Zhou GF (2017a) One-step fabrication of pyranine modified- reduced graphene oxide with ultrafast and ultrahigh humidity response. Sci Rep 7:2713–2720. https://doi.org/10.1038/s41598-017-02983-8
Chen W, Qin Z, Liu Y, Zhang Y, Li Y, Shen S, Wang ZM, Song HZ (2017b) Promotion on acetone sensing of single SnO2 nanobelt by Eu doping. Nanoscale Res Lett 12:405–412. https://doi.org/10.1186/s11671-017-2177-7
Cheng Y, Wang Y, Zhang J, Li H, Liu L, Li Y, Du L, Duan H (2017) A comparison of Eu-doped α-Fe2O3 nanotubes and nanowires for acetone sensing. Nano 12:1750138–1750148. https://doi.org/10.1142/S1793292017501387
Chien FSS, Wang CR, Chan YL, Lin HL, Chen MH, Wu RJ (2010) Fast-response ozone sensor with ZnO nanorods grown by chemical vapor deposition. Sensors Actuators B Chem 144:120–125. https://doi.org/10.1016/j.snb.2009.10.043
Chiu HC, Yeh CS (2007) Hydrothermal synthesis of SnO2 nanoparticles and their gas-sensing of alcohol. J Phys Chem C 111:7256–7259. https://doi.org/10.1021/jp0688355
Choi YJ, Hwang IS, Park JG, Choi KJ, Park JH, Lee JH (2008) Novel fabrication of an SnO2 nanowire gas sensor with high sensitivity. Nanotechnology 19:095508–095511. https://doi.org/10.1088/0957-4484/19/9/095508
Choi S, Kyung J, Woo L, Lee S, Lee C (2017) Acetone sensing of multi-networked WO3-NiO core-shell nanorod sensors. J Korean Phys Soc 71:487–493. https://doi.org/10.3938/jkps.71.487
Choudhury A (2009) Polyaniline/silver nanocomposites: dielectric properties and ethanol vapour sensitivity. Sensors Actuators B Chem 138:318–325. https://doi.org/10.1016/j.snb.2009.01.019
Choudhury A, Kar P, Mukherjee M, Adhikari B (2009) Polyaniline/silver nanocomposite based acetone vapour sensor. Sens Lett 7:592–598. https://doi.org/10.1166/sl.2009.1115
Chung MG, Kim DH, Lee HM, Kim T, Choi JH, Seo DK, Yoo JB, Hong SH, Kang TJ, Kim YH (2012) Highly sensitive NO2 gas sensor based on ozone treated graphene. Sensors Actuators B Chem 166–167:172–176. https://doi.org/10.1016/j.snb.2012.02.036
Das S, Chakraborty S, Parkash O, Kumar D, Bandyopadhyay S, Samudrala SK, Sen A, Maiti HS (2008) Vanadium doped tin dioxide as a novel sulfur dioxide sensor. Talanta 75:385–389. https://doi.org/10.1016/j.talanta.2007.11.010
Das P, Mondal B, Mukherjee K (2016) Hierarchical zinc oxide nano-tips and micro-rods: hydrothermal synthesis and improved chemi-resistive response towards ethanol. RSC Adv 6:1408–1414. https://doi.org/10.1039/C5RA23203A
Das P, Mondal B, Mukherjee K (2017a) Simultaneous adsorption−desorption processes in the conductance transient of anatase titania for sensing ethanol: a distinctive feature with kinetic perception. J Phys Chem C 121:1146–1152. https://doi.org/10.1021/acs.jpcc.6b10041
Das P, Mondal B, Mukherjee K (2017b) Chemi-resistive response of rutile titania nano-particles towards isopropanol and formaldehyde: a correlation with the volatility and chemical reactivity of vapors. Mater Res Express 4:015503–015512. https://doi.org/10.1088/2053-1591/4/1/015503
daSilva LF, Catto AC, Avansi W, Cavalcante JLS, Andrés J, Aguir K, Mastelaro VR, Longo E (2014) A novel ozone gas sensor based on one-dimensional (1D) α-Ag2WO4 nanostructures. Nanoscale 6:4058–4062. https://doi.org/10.1039/C3NR05837A
dePaiva LB, Morales AR, Diaz FRV (2008) Organoclays: properties, preparation and applications. Appl Clay Sci 42:8–24. https://doi.org/10.1016/j.clay.2008.02.006
Deshpande NG, Gudage YG, Sharma R, Vyas JC, Kim JB, Lee YP (2009) Studies on tin oxide-intercalated polyaniline nanocomposite for ammonia gas sensing applications. Sensors Actuators B Chem 138:76–84. https://doi.org/10.1016/j.snb.2009.02.012
Dhawale DS, Salunkhe RR, Patil UM, Gurav KV, More AM, Lokhande CD (2008) Room temperature liquefied petroleum gas (LPG) sensor based on p-polyaniline/n-TiO2 heterojunction. Sensors Actuators B Chem 134:988–992. https://doi.org/10.1016/j.snb.2008.07.003
Dhawale DS, Dubal DP, More AM, Gujar TP, Lokhande CD (2010a) Room temperature liquefied petroleum gas (LPG) sensor. Sensors Actuators B Chem 147:488–494. https://doi.org/10.1016/j.snb.2010.02.063
Dhawale DS, Dubal DP, Jamadade VS, Salunkhe RR, Joshi SS, Lokhande CD (2010b) Room temperature LPG sensor based on n-CdS/p-polyaniline heterojunction. Sensors Actuators B Chem 145:205–210. https://doi.org/10.1016/j.snb.2009.11.063
Eerden LJM, de Visser PHB, van Dijk CJ (1998) Risk of damage to crops in the direct neighbourhood of ammonia sources. Environ Pollut 102:49–53. https://doi.org/10.1016/S0269-7491(98)80014-6
Epifani M, Comini E, Arbiol J, DÃaz R, Sergent N, Pagnier T, Siciliano P, Faglia G, Morante JR (2008) Chemical synthesis of In2O3 nanocrystals and their application in highly performing ozone-sensing devices. Sensors Actuators B Chem 130:483–487. https://doi.org/10.1016/j.snb.2007.09.025
Farahani H, Wagiran R, Hamidon MN (2014) Humidity sensors principle, mechanism, and fabrication technologies: a comprehensive review. Sensors 14:7881–7939. https://doi.org/10.3390/s140507881
Fomekong RL, Kamta HMT, Lambi JN, Lahem D, Eloy P, Debliquy M, Delcorte A (2018) A sub-ppm level formaldehyde gas sensor based on Zn-doped NiO prepared by a co-precipitation route. J Alloy Comp 731:1188–1196. https://doi.org/10.1016/j.jallcom.2017.10.089
Gao H, Zhao L, Wang L, Sun P, Lu H, Liu F, Chuai X, Lu G (2018) Ultrasensitive and low detection limit of toluene gas sensor based on SnO2-decorated NiO nanostructure. Sensors Actuators B Chem 255:3505–3515. https://doi.org/10.1016/j.snb.2017.09.184
Gargiulo V, Alfano B, Capua RD, Alfé M, Vorokhta M, Polichetti T, Massera E, Miglietta ML, Schiattarella C, Francia GD (2018) Graphene-like layers as promising chemiresistive sensing material for detection of alcohols at low concentration. J Appl Phys 123:024503–024510. https://doi.org/10.1063/1.5000914
Gaspera ED, Guglielmi M, Agnoli S, Granozzi G, Post ML, Bello V, Mattei G, Martucci A (2010) Au nanoparticles in nanocrystalline TiO2−NiO films for SPR-based, selective H2S gas sensing. Chem Mater 22:3407–3417. https://doi.org/10.1021/cm100297q
Giang HT, Duy HT, Ngan PQ, Thai GH, Thu DTA, Thu DT, Toan NN (2011) Hydrocarbon gas sensing of nano-crystalline perovskite oxides LnFeO3 (Ln = La, Nd and Sm). Sensors Actuators B Chem 158:246–251. https://doi.org/10.1016/j.snb.2011.06.013
Gong J, Li Y, Hu Z, Zhou Z, Deng Y (2010) Ultrasensitive NH3 gas sensor from polyaniline nanograin enchased TiO2 fibers. J Phys Chem C 114:9970–9974. https://doi.org/10.1021/jp100685r
Gong M, Li Y, Guo Y, Lv X, Dou X (2018) 2D TiO2 nanosheets for ultrasensitive humidity sensing application benefited by abundant surface oxygen vacancy defects. Sensors Actuators B Chem 262:350–358. https://doi.org/10.1016/j.snb.2018.01.187
Habibzadeh S, Khodadadi AA, Mortazavi Y (2010) CO and ethanol dual selective sensor of Sm2O3-doped SnO2 nanoparticles synthesized by microwave-induced combustion. Sensors Actuators B Chem 144:131–138. https://doi.org/10.1016/j.snb.2009.10.047
Han D, Zhai L, Gu F, Wang Z (2018) Highly sensitive NO2 gas sensor of ppb-level detection based on In2O3 nanobricks at low temperature. Sensors Actuators B Chem 262:655–663. https://doi.org/10.1016/j.snb.2018.02.052
Haq M, Wen Z, Zhang Z, Khan S, Lou Z, Ye Z, Zhu L (2018) A two-step synthesis of nanosheet-covered fibers based on α-Fe2O3/NiO composites towards enhanced acetone sensing. Sci Rep 8:1705–17017. https://doi.org/10.1038/s41598-018-20103-y
Hatchett DW, Josowicz M (2008) Composites of intrinsically conducting polymers as sensing nanomaterials. Chem Rev 108:746–769. https://doi.org/10.1021/cr068112h
He P, Brent JR, Ding H, Yang J, Lewis DJ, O’Brien P, Derby B (2018) Fully printed high performance humidity sensors based on two-dimensional materials. Nanoscale 10:5599–5606. https://doi.org/10.1039/C7NR08115D
Hernandez SC, Chaudhuri D, Chen W, Myung NV, Mulchandani A (2007) Single polypyrrole nanowire ammonia gas sensor. Electroanalysis 19:2125–2130. https://doi.org/10.1002/elan.200703933
Hoa ND, Quy NV, Cho YS, Kim D (2007) Nanocomposite of SWNTs and SnO2 fabricated by soldering process for ammonia gas sensor application. Phys Status Solidi A 204:1820–1824. https://doi.org/10.1002/pssa.200675318
Huang J, Virji S, Weiller BH, Kaner RB (2003) Polyaniline nanofibers: facile synthesis and chemical sensors. J Am Chem Soc 125:314–315. https://doi.org/10.1021/ja028371y
Iravani S (2011) Green synthesis of metal nanoparticles using plants. Green Chem 13:2638–2650. https://doi.org/10.1039/C1GC15386B
Jitianu A, Altindag Y, Zaharescu M, Wark M (2003) New SnO2 nano-clusters obtained by sol-gel route, structural characterization and their gas sensing applications. J Sol-Gel Sci Technol 26:483–488. https://doi.org/10.1023/A:102073911
Kanazawa E, Sakai G, Shimanoe K, Kanmura Y, Teraoka Y, Miura N, Yamazoe N (2001) Metal oxide semiconductor N2O sensor for medical use. Sensors Actuators B Chem 77:72–77. https://doi.org/10.1016/S0925-4005(01)00675-X
Kar P, Choudhury A (2013) Carboxylic acid functionalized multi-walled carbon nanotube doped polyaniline for chloroform sensors. Sensors Actuators B Chem 183:25–33. https://doi.org/10.1016/j.snb.2013.03.093
Kar P, Pradhan NC, Adhikari B (2009) Application of sulfuric acid doped poly (m-aminophenol) as aliphatic alcohol vapor sensor material. Sensors Actuators B Chem 140:525–531. https://doi.org/10.1016/j.snb.2009.05.013
Kar P, Pradhan NC, Adhikari B (2011) Ammonia sensing by hydrochloric acid doped poly(m-aminophenol)–silver nanocomposite. J Mater Sci 46:2905–2913. https://doi.org/10.1007/s10853-010-5165-1
Kar P, Choudhury A, Verma SK (2015) Conjugated polymer nanocomposites-based chemical sensors. In: Saini P (ed) Fundamentals of conjugated polymer blends, copolymers and composites. Wiley-Scrivener, Beverly, pp 621–686. https://doi.org/10.1002/9781119137160.ch12
Karmakar M, Mondal B, Pal M, Mukherjee K (2014) Acetone and ethanol sensing of barium hexaferrite particles: a case study considering the possibilities of non-conventional hexaferrite sensor. Sensors Actuators B Chem 190:627–633. https://doi.org/10.1016/j.snb.2013.09.035
Kauffman DR, Star A (2007) Chemically induced potential barriers at the carbon nanotube−metal nanoparticle interface. Nano Lett 7:1863–1868. https://doi.org/10.1021/nl070330i
Kauffman DR, Star A (2008) Carbon nanotube gas and vapor sensors. Angew Chem Int Ed 47:6550–6570. https://doi.org/10.1002/anie.200704488
Kaur A, Singh I, Kumar J, Bhatnagar C, Dixit SK, Bhatnagar PK, Mathur PC, Covas JA, Paiva MC (2015) Enhancement in the performance of multi-walled carbon nanotube: poly(methylmethacrylate)composite thin film ethanol sensors through appropriate nanotube functionalization. Mater Sci Semicond Process 31:166–174. https://doi.org/10.1016/j.mssp.2014.11.030
Kenanakis G, Vernardou D, Koudoumas E, Kiriakidis G, Katsarakis N (2007) Ozone sensing properties of ZnO nanostructures grown by the aqueous chemical growth technique. Sensors Actuators B Chem 124:187–191. https://doi.org/10.1016/j.snb.2006.12.033
Kim D, Pikhitsa PV, Yang H, Choi M (2011) Room temperature CO and H2 sensing with carbon nanoparticles. Nanotechnology 22:485501–485507. https://doi.org/10.1088/0957-4484/22/48/485501
Kim YH, Kim SJ, Kim YJ, Shim YS, Kim SY, Hong BH, Jang HW (2015) Self-activated transparent all-graphene gas sensor with endurance to humidity and mechanical bending. ACS Nano 9:10453–10460. https://doi.org/10.1021/acsnano.5b04680
Kitture R, Pawar D, Rao CN, Choubey RK, Kale SN (2017) Nanocomposite modified optical fiber: a room temperature, selective H2S gas sensor: studies using ZnO-PMMA. J Alloy Comp 695:2091–2096. https://doi.org/10.1016/j.jallcom.2016.11.048
Kolmakov A, Zhang Y, Cheng G, Moskovites M (2003) Detection of CO and O2 using tin oxide nanowire sensors. Adv Mater 15:997–1000. https://doi.org/10.1002/adma.200304889
Kou X, Xie N, Chen F, Wang T, Guo L, Wang C, Wang Q, Ma J, Sun Y, Zhang H, Lu G (2018) Superior acetone gas sensor based on electrospun SnO2nanofibers by Rh doping. Sensors Actuators B Chem 256:861–869. https://doi.org/10.1016/j.snb.2017.10.011
Kuang Q, Lao C, Wang ZL, Xie Z, Zheng L (2007) High-sensitivity humidity sensor based on a single SnO2 nanowire. J Am Chem Soc 129:6070–6071. https://doi.org/10.1021/ja070788m
Kumar B, Feller JF, Castro M, Lu J (2010) Conductive bio-polymer nano-composites (CPC): chitosan-carbon nanotube transducers assembled via spray layer-by-layer for volatile organic compound sensing. Talanta 81:908–915. https://doi.org/10.1016/j.talanta.2010.01.036
Labidi A, Gillet E, Delamare R, Maaref M, Aguir K (2006) Ethanol and ozone sensing characteristics of WO3 based sensors activated by au and Pd. Sensors Actuators B Chem 120:338–345. https://doi.org/10.1016/j.snb.2006.02.015
Le X, Wang X, Pang J, Liu Y, Fang B, Xu Z, Gao C, Xu Y, Xie J (2018) A high performance humidity sensor based on surface acoustic wave and graphene oxide on AlN/Si layered structure. Sensors Actuators B Chem 255:2454–2461. https://doi.org/10.1016/j.snb.2017.09.038
Lee J, Kim DH, Hong SH, Jho JY (2011a) A hydrogen gas sensor employing vertically aligned TiO2nanotube arrays prepared by template-assisted method. Sensors Actuators B Chem 160:1494–1498. https://doi.org/10.1016/j.snb.2011.08.001
Lee SC, Hwang BW, Lee SJ, Choi HY, Kim SY, Jung SY, Ragupathy D, Lee DD, Kim JC (2011b) A novel tin oxide-based recoverable thick film SO2 gas sensor promoted with magnesium and vanadium oxides. Sensors Actuators B Chem 160:1328–1334. https://doi.org/10.1016/j.snb.2011.09.070
Lee DH, Kang SK, Pak Y, Lim N, Lee R, Kumaresan Y, Lee S, Lee C, Ham MH, Jung GY (2018) Transfer of preheat-treated SnO2 via a sacrificial bridge-type ZnO layer for ethanol gas sensor. Sensors Actuators B Chem 255:70–77. https://doi.org/10.1016/j.snb.2017.08.025
Li J, Lu Y, Ye Q, Cinke M, Han J, Meyyappan M (2003) Carbon nanotube sensors for gas and organic vapor detection. Nano Lett 3:929–933. https://doi.org/10.1021/nl034220x
Li B, Sauve G, Iovu MC, Jeffries-EL M, Zhang R, Cooper J, Santhanam S, Schultz L, Revelli JC, Kusne AG, Kowalewski T, Snyder JL, Weiss LE, Fedder GK, McCullough RD, Lambeth DN (2006a) Volatile organic compound detection using nanostructured copolymers. Nano Lett 6:1598–1602. https://doi.org/10.1021/nl060498o
Li J, Lu Y, Meyyappan M (2006b) Nano chemical sensors with polymer-coated carbon nanotubes. IEEE Sensors J 6:1047–1051. https://doi.org/10.1109/JSEN.2006.881018
Li Y, Wang HC, Yang MJ (2007) -type gas sensing characteristics of chemically modified multi-walled carbon nanotubes and PMMA composite. Sensors Actuators B Chem 121:496–500. https://doi.org/10.1016/j.snb.2006.04.074
Li W, Hoa ND, Cho Y, Kim D, Kim JS (2009) Nanofibers of conducting polyaniline for aromatic organic compound sensor. Sensors Actuators B Chem 143:132–138. https://doi.org/10.1016/j.snb.2009.09.006
Li W, Liang J, Liu J, Zhou L, Yang R, Hu M (2016) Synthesis and room temperature CH4 gas sensing properties of vanadium dioxide nanorods. Mater Lett 173:199–202. https://doi.org/10.1016/j.matlet.2016.03.035
Li SM, Zhang LX, Zhu MY, Ji GJ, Zhao LX, Yin J, Bie LJ (2017) Acetone sensing of ZnO nanosheets synthesized using room-temperature precipitation. Sensors Actuators B Chem 249:611–623. https://doi.org/10.1016/j.snb.2017.04.007
Li S, Lin P, Zhao L, Wang C, Liu D, Liu F, Sun P, Liang X, Liu F, Yan X, Gao Y, Lu G (2018a) The room temperature gas sensor based on Polyaniline@flower-likeWO3 nanocomposites and flexible PET substrate for NH3 detection. Sensors Actuators B Chem 259:505–513. https://doi.org/10.1016/j.snb.2017.11.081
Li Y, Zhao H, Jiao M, Yang M (2018b) Sulphonated polystyrene-b-poly(4-vinylpyridine) with nanostructures induced by phase separation as promising humidity sensitive material. Sensors Actuators B Chem 257:1118–1127. https://doi.org/10.1016/j.snb.2017.11.034
Liang YX, Chen YJ, Wang TH (2004) Low-resistance gas sensors fabricated from multiwalled carbon nanotubes coated with a thin tin oxide layer. Appl Phys Lett 85:666–668. https://doi.org/10.1063/1.1775879
Lin G, Wang H, Li X, Lai X, Zou Y, Zhou X, Liu D, Wan J, Xin H (2018) Chestnut-like CoFe2O4@SiO2@In2O3 nanocomposite microspheres with enhanced acetone sensing property. Sensors Actuators B Chem 255:3364–3373. https://doi.org/10.1016/j.snb.2017.09.163
Liu H, Kameoka J, Czaplewski DA, Craighead HG (2004) Polymeric nanowire chemical sensor. Nano Lett 4:671–675. https://doi.org/10.1021/nl049826f
Liu YL, Yang HF, Yang Y, Liu ZM, Shen GL, Yu RQ (2006) Gas sensing properties of tin dioxide coated onto multi-walled carbon nanotubes. Thin Solid Films 497:355–360. https://doi.org/10.1016/j.tsf.2005.11.018
Liu J, Luo T, Meng F, Qian K, Wan Y, Liu J (2010) Porous hierarchical In2O3 micro−/nanostructures: preparation, formation mechanism, and their application in gas sensors for noxious volatile organic compound detection. J Phys Chem C 114:4887–4894. https://doi.org/10.1021/jp911768m
Llobet E (2013) Gas sensors using carbon nanomaterials: a review. Sensors Actuators B Chem 179:32–45. https://doi.org/10.1016/j.snb.2012.11.014
Lu Y, Li J, Han J, Ng HT, Binder C, Partridge C, Meyyappan M (2004) Room temperature methane detection using palladium loaded single-walled carbon nanotube sensors. Chem Phys Lett 391:344–348. https://doi.org/10.1016/j.cplett.2004.05.029
Lu G, Ocola LE, Chen J (2009) Reduced graphene oxide for room-temperature gas sensors. Nanotechnology 20:445502–445510. https://doi.org/10.1088/0957-4484/20/44/445502
Lu G, Xu J, Sun J, Yu Y, Zhang Y, Liu F (2012) UV-enhanced room temperature NO2 sensor using ZnO nanorods modified with SnO2 nanoparticles. Sensors Actuators B Chem 162:82–88. https://doi.org/10.1016/j.snb.2011.12.039
Ma L, Ma SY, Shen XF, Wang TT, Jiang XH, Chen Q, Qiang Z, Yang HM, Chen H (2018) PrFeO3 hollow nanofibers as a highly efficient gas sensor for acetone detection. Sensors Actuators B Chem 255:2546–2554. https://doi.org/10.1016/j.snb.2017.09.060
Manjula P, Arunkumar S, Manorama SV (2011) Au/SnO2 an excellent material for room temperature carbon monoxide sensing. Sensors Actuators B Chem 152:168–175. https://doi.org/10.1016/j.snb.2010.11.059
Md Sin ND, Samsudin N, Ahmad S, Mamat MH, Rusop M (2013) Zn-doped SnO2 with 3D cubic structure for humidity sensor. Procedia Eng 56:801–806. https://doi.org/10.1016/j.proeng.2013.03.199
Ménini P, Parret F, Guerrero M, Soulantica K, Erades L, Maisonnat A, Chaudret B (2004) CO response of a nanostructured SnO2 gas sensor doped with palladium and platinum. Sensors Actuators B Chem 103:111–114. https://doi.org/10.1016/j.snb.2004.04.103
Mukherjee K, Majumder SB (2009) Analyses of response and recovery kinetics of zinc ferrite as hydrogen gas sensor. J Appl Phys 106:064912–064920. https://doi.org/10.1063/1.3225996
Mukherjee K, Majumder SB (2010) Reducing gas sensing behavior of nano-crystalline magnesium–zinc ferrite powders. Talanta 81:1826–1832. https://doi.org/10.1016/j.talanta.2010.03.042
Mukherjee K, Bharti DC, Majumder SB (2010) Solution synthesis and kinetic analyses of the gas sensing characteristics of magnesium ferrite particles. Sensors Actuators B Chem 146:91–97. https://doi.org/10.1016/j.snb.2010.02.020
Na CW, Woo HS, Lee JH (2012) Design of highly sensitive volatile organic compound sensors by controlling NiO loading on ZnO nanowire networks. RSC Adv 2:414–417. https://doi.org/10.1039/C1RA01001H
Neri G, Leonardi SG, Latino M, Donato N, Baek S, Conte DE, Russo PA, Pinna N (2013) Sensing behavior of SnO2/reduced graphene oxide nanocomposites toward NO2. Sensors Actuators B Chem 179:61–68. https://doi.org/10.1016/j.snb.2012.10.031
Nohria R, Khillan RK, Su Y, Dikshit R, Lvov Y, Varahramyan K (2006) Humidity sensor based on ultrathin polyaniline film deposited using layer-by-layer nano-assembly. Sensors Actuators B Chem 114:218–222. https://doi.org/10.1016/j.snb.2005.04.034
Oh E, Choi HY, Jung SH, Cho S, Kim JC, Lee KH, Kang SW, Kim J, Yun JY, Jeong SH (2009) High-performance NO2 gas sensor based on ZnO nanorod grown by ultrasonic irradiation. Sensors Actuators B Chem 141:239–243. https://doi.org/10.1016/j.snb.2009.06.031
Okano K, Totsuka T (1986) Absorption of nitrogen dioxide by sunflower plants grown at various levels of nitrate. New Phytol 102:551–562. https://doi.org/10.1111/j.1469-8137.1986.tb00831.x
Park Y, Dong KY, Lee J, Choi J, Bae GN, Ju BK (2009) Development of an ozone gas sensor using single-walled carbon nanotubes. Sensors Actuators B Chem 140:407–411. https://doi.org/10.1016/j.snb.2009.04.055
Parthibavarman M, Hariharan V, Sekar C (2011) High-sensitivity humidity sensorbased on SnO2nanoparticles synthesized by microwave irradiation method. Mater Sci Eng C 31:840–844. https://doi.org/10.1016/j.msec.2011.01.002
Pascariu P, Airinei A, Olaru N, Petrila I, Nica V, Sacarescu L, Tudorache F (2016) Microstructure, electrical and humidity sensor properties of electrospun NiO–SnO2 nanofibers. Sensors Actuators B Chem 222:1024–1031. https://doi.org/10.1016/j.snb.2015.09.051
Pearce TC, Schiffman SS, Nagle HT, Gardner JW (2003) Handbook of machine olfaction. Wiley-VCH, Weinheim
Penza M, Cassano G, Aversa P, Antolini F, Cusano A, Cutolo A, Giordano M, Nicolais L (2004a) Alcohol detection using carbon nanotubes acoustic and optical sensors. Appl Phys Lett 85:2379–2381. https://doi.org/10.1063/1.1784872
Penza M, Antolini F, Antisari MV (2004b) Carbon nanotubes as SAW chemical sensors materials. Sensors Actuators B Chem 100:47–59. https://doi.org/10.1016/j.snb.2003.12.019
Penza M, Tagliente MA, Aversa P, Cassano G (2005a) Organic-vapor detection using carbon-nanotubes nanocomposite microacoustic sensors. Chem Phys Lett 409:349–354. https://doi.org/10.1016/j.cplett.2005.05.005
Penza M, Cassano G, Aversa P, Cusano A, Cutolo A, Giordano M, Nicolais L (2005b) Carbon nanotube acoustic and optical sensors for volatile organic compound detection. Nanotechnology 16:2536–2547. https://doi.org/10.1088/0957-4484/16/11/013
Penza M, Cassano G, Aversa P, Antolini F, Cusano A, Consales M, Giordano M, Nicolais L (2005c) Syndiotactic polystyrene thin film as sensitive layer for an optoelectronic chemical sensing device. Sensors Actuators B Chem 111–112:171–180. https://doi.org/10.1016/j.snb.2004.02.053
Penza M, Tagliente MA, Aversa P, Re M, Cassano G (2007) The effect of purification of single-walled carbon nanotube bundles on the alcohol sensitivity of nanocomposite Langmuir–Blodgett films for SAW sensing applications. Nanotechnology 18:185502–185513. https://doi.org/10.1088/0957-4484/18/18/185502
Penza M, Rossi R, Alvisi M, Serra E (2010) Metal-modified and vertically aligned carbon nanotube sensors array for landfill gas monitoring applications. Nanotechnology 21:105501–105513. https://doi.org/10.1088/0957-4484/21/10/105501
Peter J, Harris F (1999) Carbon nanotube and related structures, new materials for the twenty first century. University of Cambridge, Cambridge
Pisarenko AN, Spendel WU, Taylor RT, Brown JD, Cox JA, Pacey GE (2009) Detection of ozone gas using gold nanoislands and surface plasmon resonance. Talanta 80:777–780. https://doi.org/10.1016/j.talanta.2009.07.062
Qi P, Vermesh O, Grecu M, Javey A, Wang Q, Dai H, Peng S, Chao KJ (2003) Toward large arrays of multiplex functionalized carbon nanotube sensors for highly sensitive and selective molecular detection. Nano Lett 3:347–351. https://doi.org/10.1021/nl034010k
Quang NH, Trinh MV, Lee BH, Huh JS (2006) Effect of NH3 gas on the electrical properties of single-walled carbon nanotube bundles. Sensors Actuators B Chem 113:341–346. https://doi.org/10.1016/j.snb.2005.03.089
Ram MK, Yavuz O, Lahsangah V, Aldissi M (2005) CO gas sensing from ultrathin nano-composite conducting polymer film. Sensors Actuators B Chem 106:750–757. https://doi.org/10.1016/j.snb.2004.09.027
Rao PJ, Geckeler KE (2011) Polymer nanoparticles: preparation techniques and size control parameters. Prog Polym Sci 36:887–913. https://doi.org/10.1016/j.progpolymsci.2011.01.001
Rout CS, Ganesh K, Govindaraj A, Rao CNR (2006a) Sensors for the nitrogen oxides, NO2, NO and N2O, based on In2O3 and WO3 nanowires. Appl Phys A Mater Sci Process 85:241–246. https://doi.org/10.1007/s00339-006-3707-9
Rout CS, Govindaraj A, Rao CNR (2006b) High-sensitivity hydrocarbon sensors based on tungsten oxide nanowires. J Mater Chem 16:3936–3941. https://doi.org/10.1039/B607012B
Rout CS, Kulkarni GU, Rao CNR (2007) Room temperature hydrogen and hydrocarbon sensors based on single nanowires of metal oxides. J Phys D Appl Phys 40:2777–2782. https://doi.org/10.1088/0022-3727/40/9/016
Sadek AZ, Wlodarski W, Shin K, Kaner RB, Kalantar-zadeh K (2006) A layered surface acoustic wave gas sensor based on a polyaniline/In2O3 nanofibre composite. Nanotechnology 17:4488–4492. https://doi.org/10.1088/0957-4484/17/17/034
Sadek AZ, Wlodarski W, Kalantar-zadeh K, Baker C, Kaner RB (2007) Doped and dedoped polyaniline nanofiber based conductometric hydrogen gas sensors. Sensors Actuators A 139:53–57. https://doi.org/10.1016/j.sna.2006.11.033
Sahay PP, Tewari S (2005) Sprayed ZnO thin films for ethanol sensors. J Mater Sci 40:4791–4793. https://doi.org/10.1007/s10853-005-0519-9
Sahm T, Mädler L, Gurlo A, Barsan N, Pratsinis SE, Weimar U (2004) Flame spray synthesis of tin dioxide nanoparticles for gas sensing. Sensors Actuators B Chem 98:148–153. https://doi.org/10.1016/j.snb.2003.10.003
Santhanam KSV, Sangoi R, Fuller L (2005) A chemical sensor for chloromethanes using a nanocomposite of multiwalled carbon nanotubes with poly(3-methylthiophene). Sensors Actuators B Chem 106:766–771. https://doi.org/10.1016/j.snb.2004.09.034
Santhosh P, Manesha KM, Gopalan A, Lee KP (2007) Novel amperometric carbon monoxide sensor based on multi-wall carbon nanotubes grafted with polydiphenylamine—fabrication and performance. Sensors Actuators B Chem 125:92–99. https://doi.org/10.1016/j.snb.2007.01.044
Santucci S, Picozzi S, Gregorio FD, Lozzi L, Cantalini C, Valentini L, Kenny JM, Delley B (2003) NO2 and CO gas adsorption on carbon nanotubes: experiment and theory. J Chem Phys 119:10904–10910. https://doi.org/10.1063/1.1619948
Shaikh FI, Chikhale LP, Mulla IS, Suryavanshi SS (2017) Synthesis, characterization and enhanced acetone sensing performance of Pd loaded Sm doped SnO2 nanoparticles. Ceram Int 43:10307–10315. https://doi.org/10.1016/j.ceramint.2017.05.060
Sharma S, Nirkhe C, Pethkar S, Athawale AA (2002) Chloroform vapour sensor based on copper/polyaniline nanocomposite. Sensors Actuators B Chem 85:131–136. https://doi.org/10.1016/S0925-4005(02)00064-3
Shen JY, Zhang L, Ren J, Wang JC, Yao HC, Li ZJ (2017) Highly enhanced acetone sensing performance of porous C-doped WO3 hollow spheres by carbon spheres as templates. Sensors Actuators B Chem 239:597–607. https://doi.org/10.1016/j.snb.2016.08.069
Shojaee M, Nasresfahani S, Sheikhi MH (2018) Hydrothermally synthesized Pd-loaded SnO2/partially reducedgraphene oxide nanocomposite for effective detection of carbonmonoxide at room temperature. Sensors Actuators B Chem 254:457–467. https://doi.org/10.1016/j.snb.2017.07.083
Sin MLY, Chow GCT, Wong GMK, Li WJ, Leong PHW, Wong KW (2007) Ultralow-power alcohol vapor sensors using chemically functionalized multiwalled carbon nanotubes. IEEE Trans Nanotechnol 6:571–577. https://doi.org/10.1109/TNANO.2007.900511
Singh N, Yan C, Lee PS (2010) Room temperature CO gas sensing using Zn-doped In2O3 single nanowire field effect transistors. Sensors Actuators B 150:19–24. https://doi.org/10.1016/j.snb.2010.07.051
Srivastava S, Kumar S, Singh VN, Singh M, Vijay YK (2011) Synthesis and characterization of TiO2 doped polyaniline composites for hydrogen gas sensing. Int J Hydrog Eng 36:6343–6355. https://doi.org/10.1016/j.ijhydene.2011.01.141
Star A, Joshi V, Skarupo S, Thomas D, Gabriel JCP (2006) Gas sensor array based on metal-decorated carbon nanotubes. J Phys Chem B 110:21014–21020
Starke TKH, Coles GSV (2002) High sensitivity ozone sensors for environmental monitoring produced using laser ablated nanocrystalline metal oxides. IEEE Sensors J 2:14–19. https://doi.org/10.1109/7361.987056
Starke TKH, Coles GSV, Ferkel H (2002) High sensitivity NO2 sensors for environmental monitoring produced using laser ablated nanocrystalline metal oxides. Sensors Actuators B Chem 85:239–245. https://doi.org/10.1016/S0925-4005(02)00114-4
Su PG, Tsai WY (2004) Humidity sensing and electrical properties of a composite material of nano-sized SiO2 and poly(2-acrylamido-2-methylpropane sulfonate). Sensors Actuators B Chem 100:417–422. https://doi.org/10.1016/j.snb.2004.02.011
Sun L, Wang B, Wang Y (2018) A novel silicon carbide nanosheet for high-performance humidity sensor. Adv Mater Interfaces 5:1701300–1701325. https://doi.org/10.1002/admi.201701300
Sutar DS, Padma N, Aswal DK, Deshpande SK, Gupta SK, Yakhmi JV (2007) Preparation of nanofibrous polyaniline films and their application as ammonia gas sensor. Sensors Actuators B Chem 128:286–292. https://doi.org/10.1016/j.snb.2007.06.015
Tai H, Jiang Y, Xie G, Yu J, Chen X (2007) Fabrication and gas sensitivity of polyaniline–titanium dioxide nanocomposite thin film. Sensors Actuators B Chem 125:644–650. https://doi.org/10.1016/j.snb.2007.03.013
Tai H, Jiang Y, Xie G, Yu J, Chen X, Ying Z (2008) Influence of polymerization temperature on NH3 response of PANI/TiO2 thin film gas sensor. Sensors Actuators B Chem 129:319–326. https://doi.org/10.1016/j.snb.2007.08.013
Tang H, Li Y, Zheng C, Ye J, Hou X, Lv Y (2007) An ethanol sensor based on cataluminescence on ZnO nanoparticles. Talanta 72:1593–1597. https://doi.org/10.1016/j.talanta.2007.01.035
Tao J, Wang YY, Xiao YJ, Yao P, Chen C, Zhang DH, Pang W, Yang HT, Sun D, Wang ZF, Liu J (2017) One-step exfoliation and functionalization of graphene by hydrophobin for high performance water molecular sensing. Carbon 116:695–702. https://doi.org/10.1016/j.carbon.2017.02.052
Thostenson E, Li C, Chou T (2005) Nanocomposites in context. Compos Sci Technol 65:491–516. https://doi.org/10.1016/j.compscitech.2004.11.003
Timmer B, Olthius W, van den Berg A (2005) Ammonia sensors and their applications – a review. Sensors Actuators B Chem 107:666–677. https://doi.org/10.1016/j.snb.2004.11.054
Toloman D, Popa A, Stan M, Socaci C, Biris AR, Katona G, Tudorache F, Petrila I, Iacomi F (2017) Appl Surf Sci 402:410–417. https://doi.org/10.1016/j.apsusc.2017.01.064
Tomer VK, Duhan S (2015) Nano titania loaded mesoporous silica: preparation and application as high performance humidity sensor. Sensors Actuators B Chem 220:192–200. https://doi.org/10.1016/j.snb.2015.05.072
Verma SK, Kar P, Yang DJ, Choudhury A (2015) Poly(m-aminophenol)/functionalized multi-walled carbon nanotubenanocomposite based alcohol sensors. Sensors Actuators B Chem 219:199–208. https://doi.org/10.1016/j.snb.2015.04.117
Verma SK, Choudhury A, Kar P (2017a) Synthesis, characteristics and aliphatic alcohol sensing behavior of poly(m–aminophenol)/sulfonic acid-functionalized multi-walled carbon nanotube composite. ChemistrySelect 2:3917–3924. https://doi.org/10.1002/slct.201700470
Verma SK, Choudhury A, Kar P (2017b) Selective sensing of ethanol by poly(m-aminophenol)/amine groups functionalized multi-walled carbon nanotube composite. Sens Lett 15:448–456. https://doi.org/10.1166/sl.2017.3826
Virji S, Huang J, Kaner RB, Weiller BH (2004) Polyaniline nanofiber gas sensors: examination of response mechanisms. Nano Lett 4:491–496. https://doi.org/10.1021/nl035122e
Wang CT, Chen MT (2010) Vanadium-promoted tin oxide semiconductor carbon monoxide gas sensors. Sensors Actuators B 150:360–366. https://doi.org/10.1016/j.snb.2010.06.060
Wang J, Lin Q, Zhou R, Xu B (2002) Humidity sensors based on composite material of nano-BaTiO3 and polymer RMX. Sensors Actuators B Chem 81:248–253. https://doi.org/10.1016/S0925-4005(01)00959-5
Wang CY, Cimalla V, Kups T, Röhlig CC, Stauden T, Ambacher O, Kunzer M, Passow T, Schirmacher W, Pletschen W, Köhler K, Wagner J (2007) Integration of In2O3 nanoparticle based ozone sensors with GaInN/GaN light emitting diodes. Appl Phys Lett 91:103509–103511. https://doi.org/10.1063/1.2779971
Wang Y, Jia W, Strout T, Schempf A, Zhang H, Li B, Cui J, Lei Y (2009) Ammonia gas sensor using polypyrrole-coated TiO2/ZnO nanofibers. Electroanalysis 21:1432–1438. https://doi.org/10.1002/elan.200904584
Wang X, Ding B, Yu J, Wang M, Pan F (2010) A highly sensitive humidity sensor based on a nanofibrous membrane coated quartz crystal microbalance. Nanotechnology 21:055502–055507. https://doi.org/10.1088/0957-4484/21/5/055502
Wang J, Yang J, Han N, Zhou X, Gong S, Yang J, Hu P, Chen Y (2017) Highly sensitive and selective ethanol and acetone gas sensors based on modified ZnO nanomaterials. Mater Des 121:69–76. https://doi.org/10.1016/j.matdes.2017.02.048
Wang Q, Kou X, Liu C, Zhao L, Lin T, Liu F, Yang X, Lin J, Lu G (2018a) Hydrothermal synthesis of hierarchical CoO/SnO2 nanostructures for ethanol gas sensor. J Colloid Interface Sci 513:760–766. https://doi.org/10.1016/j.jcis.2017.11.073
Wang X, Li Y, Pionteck J, Zhou Z, Weng W, Luo X, Qin Z, Voit B, Zhu M (2018b) Flexible poly(styrene-butadiene-styrene)/carbon nanotube fiber based vapor sensors with high sensitivity, wide detection range, and fast response. Sensors Actuators B Chem 256:896–904. https://doi.org/10.1016/j.snb.2017.10.028
Wanna Y, Srisukhumbowornchai N, Tauntranont A, Wisitsoraat A, Thavarungkul N, Singjai P (2006) The effect of carbon nanotube dispersion on CO gas sensing characteristics of polyaniline gas sensor. J Nanosci Nanotechnol 6:3893–3896. https://doi.org/10.1166/jnn.2006.675
Wei C, Dai L, Roy A, Tolle TB (2006) Multifunctional chemical vapor sensors of aligned carbon nanotube and polymer composites. J Am Chem Soc 128:1412–1413. https://doi.org/10.1021/ja0570335
Wisitsoraat A, Tuantranont A, Thanachayanont C, Patthanasettakul V, Singjai P (2006) Electron beam evaporated carbon nanotube dispersed SnO2 thin film gas sensor. J Electroceram 17:45–49. https://doi.org/10.1007/s10832-006-9934-9
Wu N, Zhao M, Zheng JG, Jiang C, Myers B, Li S, Chyu M, Mao SX (2005) Porous CuO–ZnO nanocomposite for sensing electrode of high-temperature CO solid-state electrochemical sensor. Nanotechnology 16:2878–2881. https://doi.org/10.1088/0957-4484/16/12/024
Wu RJ, Lin HL, Chen MH, Wu TM, Chien FSS (2008) Application of nanostructure ZnO for room working temperature ozone sensor. Sens Lett 6:800–802. https://doi.org/10.1166/sl.2008.504
Xiangfeng C, Caihong W, Dongli J, Chenmou Z (2004) Ethanol sensor based on indium oxide nanowires prepared by carbothermal reduction reaction. Chem Phys Lett 399:461–464. https://doi.org/10.1016/j.cplett.2004.10.053
Xiong Y, Xu W, Ding D, Lu W, Zhu L, Zhu Z, Wang Y, Xue Q (2018) Ultra-sensitive NH3 sensor based on flower-shaped SnS2 nanostructures with sub-ppm detection ability. J Hazard Mater 341:159–167. https://doi.org/10.1016/j.jhazmat.2017.07.060
Xu K, Fu C, Gao Z, Wei F, Ying Y, Xu C, Fu G (2018) Nanomaterial-based gas sensors: a review. Instrum Sci Technol 46:115–145. https://doi.org/10.1080/10739149.2017.1340896
Xue L, Wang W, Guo Y, Liu G, Wan P (2017) Flexible polyaniline/carbon nanotube nanocomposite film-based electronic gas sensors. Sensors Actuators B Chem 244:47–53. https://doi.org/10.1016/j.snb.2016.12.064
Yan XB, Han ZJ, Yang Y, Tay BK (2007) NO2 gas sensing with polyaniline nanofibers synthesized by a facile aqueous/organic interfacial polymerization. Sensors Actuators B Chem 123:107–113. https://doi.org/10.1016/j.snb.2006.07.031
Yang W, Thordarson P, Gooding JJ, Ringer SP, Braet F (2007) Carbon nanotubes for biological and biomedical applications. Nanotechnology 18:412001–412013. https://doi.org/10.1088/0957-4484/18/41/412001
Yin H, Yu K, Peng H, Zhang Z, Huang R, Travas-Sejdic J, Zhu Z (2012) Porous V2O5 micro/nano-tubes: synthesis via a CVD route, single-tube-based humidity sensor and improved Li-ion storage properties. J Mater Chem 22:5013–5019. https://doi.org/10.1039/C2JM15494C
Yoon J, Chae SK, Kim JM (2007) Colorimetric sensors for volatile organic compounds (VOCs) based on conjugated polymer-embedded electrospun fibers. J Am Chem Soc 129:3038–3039. https://doi.org/10.1021/ja067856+
Zhang Y, Yu K, Jiang D, Zhu Z, Geng H, Luo L (2005) Zinc oxide nanorod and nanowire for humidity sensor. Appl Surf Sci 242:212–217. https://doi.org/10.1016/j.apsusc.2004.08.013
Zhang T, Nix MB, Yoo BY, Deshusses MA, Myung NV (2006) Electrochemically functionalized single-walled carbon nanotube gas sensor. Electroanalysis 18:1153–1158. https://doi.org/10.1002/elan.200603527
Zhang Y, He X, Li J, Miao Z, Huang F (2008) Fabrication and ethanol-sensing properties of micro gas sensor based on electrospun SnO2 nanofibers. Sensors Actuators B Chem 132:67–73. https://doi.org/10.1016/j.snb.2008.01.006
Zhang H, Feng J, Fei T, Liu S, Zhang T (2014a) SnO2 nanoparticles-reduced graphene oxide nanocomposites for NO2 sensing at low operating temperature. Sensors Actuators B 190:472–478. https://doi.org/10.1016/j.snb.2013.08.067
Zhang D, Tong J, Xia B (2014b) Humidity-sensing properties of chemically reduced graphene oxide/polymer nanocomposite film sensor based on layer-by-layer nano self-assembly. Sensors Actuators B Chem 197:66–72. https://doi.org/10.1016/j.snb.2014.02.078
Zhang D, Chang H, Li P, Liu R, Xue Q (2016) Fabrication and characterizationof an ultrasensitive humidity sensor based on metal oxide/graphene hybridnanocomposite. Sensors Actuators B Chem 225:233–240. https://doi.org/10.1016/j.snb.2015.11.024
Zhang D, Wang D, Li P, Zhou X, Zong X, Dong G (2018) Facile fabrication of high-performance QCM humidity sensor based on layer-by-layer self-assembled polyaniline/graphene oxide nanocomposite film. Sensors Actuators B Chem 255:1869–1877. https://doi.org/10.1016/j.snb.2017.08.212
Zhao L, Choi M, Kim HS, Hong SH (2007) The effect of multiwalled carbon nanotube doping on the CO gas sensitivity of SnO2-based nanomaterials. Nanotechnology 18:445501–445505. https://doi.org/10.1088/0957-4484/18/44/445501
Zhao C, Lan W, Gong H, Bai J, Ramachandran R, Liu S, Wang F (2018) Highly sensitive acetone-sensing properties of Pt-decorated CuFe2O4 nanotubes prepared by electrospinning. Ceram Int 44:2856–2863. https://doi.org/10.1016/j.ceramint.2017.11.032
Zhu Z, Chang JL, Wu RJ (2015) Fast ozone detection by using a core–shell Au@TiO2 sensor at room temperature. Sensors Actuators B Chem 214:56–62. https://doi.org/10.1016/j.snb.2015.03.017
Zhuo M, Chen Y, Suna J, Zhang H, Guo D, Zhang H, Li Q, Wang T, Wan Q (2013) Humidity sensing properties of a single Sb doped SnO2 nanowire field effect transistor. Sensors Actuators B Chem 186:78–83. https://doi.org/10.1016/j.snb.2013.05.043
Zribi A, Knoblock A, Rao R (2005) Enhancement of sensitivity in gas chemiresistors based on carbon nanotube surface functionalized with noble metal (Au, Pt) nanoclusters. Appl Phys Lett 86:203112–203115. https://doi.org/10.1063/1.2722207
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Kar, P. (2020). Nanomaterials Based Sensors for Air Pollution Control. In: Dasgupta, N., Ranjan, S., Lichtfouse, E. (eds) Environmental Nanotechnology Volume 4. Environmental Chemistry for a Sustainable World, vol 32. Springer, Cham. https://doi.org/10.1007/978-3-030-26668-4_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-26668-4_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-26667-7
Online ISBN: 978-3-030-26668-4
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)