Abstract
In the paper, dynamics analysis of a parallel manipulator is presented. It is an atypical manipulator, devoted to help in assembling of heavy industrial constructions. Few atypical properties are required: small workspace; slow velocities; high loads. Initially, a short discussion about definition of the parallel manipulators is presented, as well as the sketch of the proposed structure. In parallel, some definitions, assumptions and equations are presented for the used multibody methodology. The main part of the paper presents results of the numerical tests performed in order to determinate the best work configuration of the proposed structure. It is verified, that with the initially proposed one, not all of the work requirements are satisfied, mainly about the load distribution. Obtained numerical results are confirmed by some diagrammatic simplified analysis of the load distribution. With the same diagrammatic method, alternative configurations are proposed and verified numerically, next. At the end, final configuration is presented as the one satisfying the requirements.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
ISO 8373:2012 (2012)
IFR – International Federation of Robotics Homepage, https://ifr.org/industrial-robots, last accessed 2018/11/27.
Merlet, J.P.: Parallerl Robots. 2nd edn. Springer, Netherlands (2006)
Staicu S.: Dynamics of Parallel Robots. Springer International Publishing, Switzerland (2019)
Zhao, Y., Gao, F.: Dynamic Performance of the 8PSS Redundant Parallel Manipulator and Its Non-Redundant Counterpart – the 6PSS Parallel Manipulator. Mechanism and Machine Theory 44(5), 991–1008 (2009).
Notash, L., Huang, L.: On the design of fault tolerant parallel manipulators. Mechanism and Machine Theory 38, 85–101 (2003)
Kim, H.W., Lee, J.H., Suh, I-H., Yi, B-J.: Comparative Study and Experimental Verification of Singular-Free Algorithms for a 6 DOF Parallel Haptic Device. Mechatronics 15, 403–422 (2005).
Lipinski, K.: Redundant Actuation of 3RRR over-actuated Planar Parallel Manipulator. Acta Technica Napocensis-Series Applied Mathematics and Mechanics 52(3), 137-142 (2009).
Moosavian, A., Xi, F.: Statically Redundant Parallel Robots. Meccanica 51, 1623–1637 (2016).
Shalyukhin, K.A., Rashoyan, G.V., Aleshin, A.K., Skvortsov, S.A., Levin, S.V., Antonov, A.V.: Problems of Kinematic Analysis and Special Positions of Mechanisms of Robots with Parallel Structure. Journal of Machinery Manufacture and Reliability 47(4), 310–316 (2018).
Germain, C., Briot, S., Caro, S., Wegner Ph.: Natural Frequency Computation of Parallel Robots. Journal of Computational and Nonlinear Dynamics 10(2), (2015).
Cammarata, A., Calio, I., D’Urso, D., Greco, A., Lacagnina, M., Fichera G.: Dynamic stiffness model of spherical parallel robots. Journal of Sound and Vibration 384, 312–324 (2016).
Fisette, P., Lipinski, K. and Samin, J.C.: Modelling for the Simulation Control and Optimization of Multibody System. Advances in Multib. Sys. and Mechat., Gratz(Austria), 139-174 (1999).
Fisette, P. and Samin, J.C.: Symbolic Modeling of Multibody System. Kluwer Acad. Publ., Netherlands (2003).
Lipiński, K.: Multibody Systems with Unilateral Constraints in Application to Modelling of Complex Mechanical Systems. Seria Monografie 123, Wydaw.P.G., Gdańsk (2012) (in Polish).
Haug, E.J. Yen, J.: Generalized Coord. Partitioning Meth. for Num. Integ., Real-Time Integ. Meth. for Mech. Sys. Simul.. NATO ASI Series 69, 97-114 (1990).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Lipinski, K. (2019). Effective configuration of a double triad planar parallel manipulator for precise positioning of heavy details during their assembling process. In: Uhl, T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_179
Download citation
DOI: https://doi.org/10.1007/978-3-030-20131-9_179
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20130-2
Online ISBN: 978-3-030-20131-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)