1. Development of automotive engine cradle by hydroforming process

   • K. J. Kim
   • J. S. Kim
   • C. W. Sung

   OriginalPaper Article: 1523

2. Preface

   • Yong Taek Im
   • Fuh Kuo Chen

   EditorialNotes Pages: 1438 - 1438

3. Laser treatment of HVOF coating: model study and characterization

   • Z. Y. Taha-al
   • M. S. Hashmi
   • B. S. Yilbas

   OriginalPaper Pages: 1439 - 1444

4. Microstructure analysis of aluminum extrusion: grain size distribution in AA6060, AA6082 and AA7075 alloys

   • M. Schikorra
   • L. Donati
   • A. E. Tekkaya

   OriginalPaper Pages: 1445 - 1451

5. Micro press forming and assembling of micro parts in a progressive die

   • Ming Yang
   • Ken-ichi Manabe
   • Kuniyoshi Ito

   OriginalPaper Pages: 1452 - 1455

6. Finite element simulation of deformation processes of micro-components

   • W. M. Gao
   • L. X. Kong
   • P. D. Hodgson

   OriginalPaper Pages: 1456 - 1463

7. Numerical and experimental approach on energy dissipation in nano colloidal damper

   • T. W. Ku
   • S. B. Jeon
   • B. S. Kang

   OriginalPaper Pages: 1464 - 1470

8. Study of the effect of imperfect tips on nanoindentation by FEM

   • Feng -Yuan Chen
   • Rwei -Ching Chang

   OriginalPaper Pages: 1471 - 1476

9. Parametric study of injection molding and hot embossing in polymer microfabrication

   • Cheng -Hsien Wu
   • Hsien -Chang Kuo

   OriginalPaper Pages: 1477 - 1482

10. A CFD-aided experimental study on bending of micro glass pipettes

    • W. Xia
    • H. Y. Hsu
    • L. X. Kong

    OriginalPaper Pages: 1483 - 1490

11. A novel stylus profiler without nonlinearity and parasitic motion for FPD inspection system

    • Hyun Soo Jung
    • Min-Sung Hong
    • Moon G. Lee

    OriginalPaper Pages: 1491 - 1497

12. Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique

    • Chih -Wei Wu
    • Jin -Rong Tsai
    • Chun -Ching Hsiao

    OriginalPaper Pages: 1498 - 1504

13. Viscous pressure bulging of aluminium alloy sheet at warm temperatures

    • Jianguang Liu
    • Qiucai Peng
    • Zhongjin Wang

    OriginalPaper Pages: 1505 - 1511

14. Prediction of failure in tube hydroforming process using a damage model

    • G. H. Majzoobi
    • F. Freshteh Saniee
    • A. Shirazi

    OriginalPaper Pages: 1512 - 1517

15. Incremental forming of Mg alloy sheet at elevated temperatures

    • S. W. Kim
    • Y. S. Lee
    • J. H. Lee

    OriginalPaper Pages: 1518 - 1522

16. Measurement of the forward slip in cold strip rolling using a high speed digital camera

    • C. Lu
    • A. K. Tieu

    OriginalPaper Pages: 1528 - 1533

17. Instability map based on specific plastic work criterion for hot deformation

    • H. W. Lee
    • H. C. Kwon
    • Y. T. Im

    OriginalPaper Pages: 1534 - 1540

18. Research on interactive influences of parameters on T-shaped cold ring rolling by 3d-FE numerical simulation

    • Lanyun Li
    • He Yang
    • Zhichao Sun

    OriginalPaper Pages: 1541 - 1547

19. A new extrusion method joining tube and sheet with holed rib

    • Tstomu Moroi
    • Takashi Kuboki
    • Makoto Murata

    OriginalPaper Pages: 1548 - 1552

20. The effect of selected parameters on temperature distribution in axisymmetric extrusion process

    • J. S. Ajiboye
    • M. B. Adeyemi

    OriginalPaper Pages: 1553 - 1559

21. Artificial neural network modeling of phase volume fraction of Ti alloy under isothermal and non-isothermal hot forging conditions

    • J. H. Kim
    • N. S. Reddy
    • N. K. Park

    OriginalPaper Pages: 1560 - 1565

22. The prediction of maximum forging load and effective stress for different material of bevel gear forging

    • T. S. Yang
    • N. C. Hwang
    • S. Y. Chang

    OriginalPaper Pages: 1566 - 1572

23. Die design in the complex shape drawing of cross roller guide to improve the dimensional accuracy

    • S. K. Lee
    • J. E. Lee
    • S. M. Kim

    OriginalPaper Pages: 1573 - 1579

24. Study of applying reverse engineering to turbine blade manufacture

    • Chen -Hua She
    • Chun -Chi Chang

    OriginalPaper Pages: 1580 - 1584

25. The design of blank’s initial shape in the near net-shape deep drawing of square cup

    • T. S. Yang
    • R. F. Shyu

    OriginalPaper Pages: 1585 - 1592

26. Study of the rheological properties and the finishing behavior of abrasive gels in abrasive flow machining

    • A. C. Wang
    • C. H. Liu
    • S. H. Pai

    OriginalPaper Pages: 1593 - 1598

27. A model to simulate surface roughness in the pad dressing process

    • T. L. Horng

    OriginalPaper Pages: 1599 - 1604

28. Investigation of internal ultrasonically assisted grinding of small holes: effect of ultrasonic vibration in truing and dressing of small CBN grinding wheel

    • Mitsuyoshi Nomura
    • Yongbo Wu
    • Tsunemoto Kuriyagawa

    OriginalPaper Pages: 1605 - 1611

29. Development of automatic regrinding program for PC-based tool grinding machine

    • Y. C. Wang
    • B. Y. Lee
    • D. K. Shih

    OriginalPaper Pages: 1612 - 1616

30. Influence of current impulse on machining characteristics in EDM

    • Y. Y. Tsai
    • C. T. Lu

    OriginalPaper Pages: 1617 - 1621

31. Construction of a surface roughness prediction model for high speed machining

    • S. Y. Lin
    • S. H. Cheng
    • C. K. Chang

    OriginalPaper Pages: 1622 - 1629

32. Design of freeform surface finish using burnishing assistance following electrochemical finishing

    • P. S. Pa

    OriginalPaper Pages: 1630 - 1636

33. Spectral analysis of malfunction mode in endmilling

    • Do -Hun Chin
    • Moon-Chul Yoon
    • Hyun -Deog Cho

    OriginalPaper Pages: 1637 - 1643

34. Tool path generation method for multi-axis machining of helical milling cutter with specific cross-section profile

    • J. N. Lee

    OriginalPaper Pages: 1644 - 1650

35. Statistical model to determine surface roughness when milling hastelloy C-22HS

    • K. Kadirgama
    • K. A. Abou-El-Hossein
    • H. Habeeb

    OriginalPaper Pages: 1651 - 1655

36. Thixo forging process of wrought aluminum alloy fabricated by rotational helical shape stirrer

    • S. M. Lee
    • S. H. Han
    • C. G. Kang

    OriginalPaper Pages: 1656 - 1662

37. The effect of OPWF filler on impact strength of glass-fiber reinforced epoxy composite

    • S. Mridha
    • S. B. Keng
    • Z. Ahmad

    OriginalPaper Pages: 1663 - 1670

38. A study on the impact behavior of adhesively-bonded composite materials

    • J. U. Cho
    • S. K. Lee
    • A. J. Kinloch

    OriginalPaper Pages: 1671 - 1676

39. Experimental study of cure process of foam rubber: observation of cell structure

    • H. Tsuji
    • Sh. Nozu
    • K. Ohnishi

    OriginalPaper Pages: 1677 - 1681

40. The role of shape memory alloy on impact response of glass/epoxy laminates under low temperature

    • K. W. Kang
    • H. J. Kim
    • J. K. Kim

    OriginalPaper Pages: 1682 - 1688

41. Improvement of surface electrical conductivity in poly carbonate composite by nitrogen ion implantation

    • Kyung Kyoon Kim
    • Jeong Suk Kim
    • Myung -Chang Kang

    OriginalPaper Pages: 1689 - 1693

42. A study on the manufacturing conditions of metal matrix composites by low pressure infiltration process

    • Won -Jo Park
    • Md. Anowar Hossian
    • Sun -Chul Huh

    OriginalPaper Pages: 1694 - 1699

43. Prediction of welding residual distortions of large structures using a local/global approach

    • Y. G. Duan
    • Y. Vincent
    • J. M. Bergheau

    OriginalPaper Pages: 1700 - 1706

44. Temperature fields in the fusion zone induced by a moving electron beam

    • C. Y. Ho
    • Y. C. Lee

    OriginalPaper Pages: 1707 - 1713

45. Characteristics of the residual stress distribution in welded tubular T-joints

    • G. C. Jang
    • K. H. Chang
    • C H. Lee

    OriginalPaper Pages: 1714 - 1719

46. Development of an auto-welding system for CRD nozzle repair welds using a 3D laser vision sensor

    • K. Park
    • Y. Kim
    • S. Rhee

    OriginalPaper Pages: 1720 - 1725

47. A study on the prediction of bead geometry in the robotic welding system

    • J. S. Son
    • I. S. Kim
    • H. J. Kim

    OriginalPaper Pages: 1726 - 1731

48. PZT actuator applied to a femto-liter droplet ejector

    • A. S. Yang
    • C. H. Cheng
    • F. S. Hsu

    OriginalPaper Pages: 1732 - 1738

49. Dynamic mechanical properties of photo resist thin films

    • Rwei -Ching Chang
    • Feng -Yuan Chen
    • PaoHsiang Yang

    OriginalPaper Pages: 1739 - 1744

50. The deflection of a simply supported plate induced by piezoelectric actuators

    • S. C. Her
    • C. Y. Liu

    OriginalPaper Pages: 1745 - 1751