1. Reaction equilibria in the production of manganese ferroalloys

   • Weizhong Ding
   • Sverre E. Olsen

   OriginalPaper Pages: 5 - 17

2. Physical modeling studies of electrolyte flow due to gas evolution and some aspects of bubble behavior in advanced Hall cells: Part III. predicting the performance of advanced Hall cells

   • R. Shekhar
   • J. W. Evans

   OriginalPaper Pages: 19 - 27

3. Prediction of liquid metal viscosities using an adjustable hard sphere radial distribution curve

   • Anthony L. Hines
   • Tsair-Wang Chung

   OriginalPaper Pages: 29 - 34

4. Water model experiment on the liquid flow behavior in a bottom blown bath with top layer

   • Manabu Iguchi
   • Olusegun J. Ilegbusi
   • Zen-Ichiro Morita

   OriginalPaper Pages: 35 - 41

5. Probing the initial stage of synthesis of Al₂O₃/Al composites by directed oxidation of Al-Mg alloys

   • H. Venugopalan
   • K. Tankala
   • T. Debroy

   OriginalPaper Pages: 43 - 50

6. Variation of contact angles with temperature and time in the Al-Al₂O₃ system

   • Woohyun Jung
   • Huesup Song
   • Doh-Yeon Kim

   OriginalPaper Pages: 51 - 55

7. Solubility of carbon in CaO-Al₂O₃ melts

   • Masaki Kuwata
   • Hideaki Suito

   OriginalPaper Pages: 57 - 64

8. Representation of mixed reactive gases on free energy (Ellingharn-Richardson) diagrams

   • C. V. Robino

   OriginalPaper Pages: 65 - 69

9. Influence of phosphorus addition on the surface tension of liquid iron and segregation of phosphorus on the surface of Fe-P alloy

   • X. M. Xue
   • H. G. Jiang
   • Z. Q. Hu

   OriginalPaper Pages: 71 - 79

10. Thermomechanics of the cooling stage in casting processes: Three-dimensional finite element analysis and experimental validation

    • M. Bellet
    • F. Decultieux
    • I. L. Svensson

    OriginalPaper Pages: 81 - 99

11. Scaling of intragranuiar dendritic microstructure in ingot solidification

    • D. Bouchard
    • J. S. Kirkaldy

    OriginalPaper Pages: 101 - 113

12. The design of feed systems for thin-walled zinc high-pressure die castings

    • M. T. Murray
    • J. R. Griffiths

    OriginalPaper Pages: 115 - 118

13. Heat-flow-based analysis of surface crack formation during the start-up of the direct chill casting process: Part I. development of the inverse heat-transfer model

    • J. B. Wiskel
    • S. L. Cockcroft

    OriginalPaper Pages: 119 - 127

14. Heat-flow-based analysis of surface crack formation during the start-up of the direct chill casting process: Part II. experimental study of an AA5182 rolling ingot

    • J. B. Wiskel
    • S. L. Cockcroft

    OriginalPaper Pages: 129 - 137

15. The influence of oxygen pressure and P₂O₅ on the surface tension of liquid iron oxide at 1435 °C

    • P. K. Bhattacharyya
    • D. R. Gaskell

    Communications Pages: 139 - 141

16. Vacuum evaporation of KCl-NaCl salts: Part I. thermodynamic modeling of vapor pressures of solid and liquid solutions

    • Lily L. Wang
    • Terry C. Wallace

    Communications Pages: 141 - 146

17. Discussion of “The effect of steel chemistry on the formation of Fe-Zn intermetallic compounds of galvanneal-coated steel sheets”

    • Lucille A. Giannuzzi
    • Paul R. Howell
    • William R. Bitler

    Communications Pages: 146 - 147

18. Authors’ reply

    • C. S. Lin
    • M. Meshii

    Communications Pages: 147 - 148