1. Microstructural Evolution in Fe-22Mn-0.4C Twinning-Induced Plasticity Steel During High Strain Rate Deformation

   • Yumi Ha
   • Hyunmin Kim
   • Nack J. Kim

   Communication 17 December 2014 Pages: 545 - 548

   

2. Non-equilibrium Solidification and Microsegregation Mechanism Based on Interface Evolution and Discrete Crystal Growth

   • Xiaoping Ma
   • Dianzhong Li

   Communication 17 December 2014 Pages: 549 - 555

   

3. Foreword

   • Ömer N. Doğan
   • Xingbo Liu
   • Junpin Lin

   Symposium: Materials for High-Temperature Applications: Next Generation Superalloys and Beyond 10 December 2014 Pages: 556 - 556

4. Mechanical Properties and Fracture Behavior of Directionally Solidified NiAl-V Eutectic Composites

   • Srdjan Milenkovic
   • Rubens Caram

   Symposium: Materials for High-Temperature Applications: Next Generation Superalloys and Beyond 09 July 2014 Pages: 557 - 565

   

5. Ab Initio Study of Binary and Ternary Nb₃(X,Y) A15 Intermetallic Phases (X,Y = Al, Ge, Si, Sn)

   • Ioannis Papadimitriou
   • Claire Utton
   • Panos Tsakiropoulos

   Symposium: Materials for High-Temperature Applications: Next Generation Superalloys and Beyond 19 June 2014 Pages: 566 - 576

   

6. Effects of Cold Rolling and Strain-Induced Martensite Formation in a SAF 2205 Duplex Stainless Steel

   • Marco Breda
   • Katya Brunelli
   • Irene Calliari

   OriginalPaper 19 November 2014 Pages: 577 - 586

   

7. Effects of Temperature on the Hardness and Wear Resistance of High-Tungsten Stellite Alloys

   • Rong Liu
   • X. J. Wu
   • Rachel Collier

   OriginalPaper 18 November 2014 Pages: 587 - 599

   

8. Kinetics and Mechanisms of Isothermal Devitrification in Amorphous Cu₅₀Zr₅₀

   • Tim Cullinan
   • Ilkay Kalay
   • Ralph Napolitano

   OriginalPaper 17 December 2014 Pages: 600 - 613

   

9. The Effect of Solute Nb on the Austenite-to-Ferrite Transformation

   • Tao Jia
   • Matthias Militzer

   OriginalPaper 19 November 2014 Pages: 614 - 621

   

10. The Evolution of the Fraction of Individual Phases During a Simultaneous Multiphase Transformation from Time–Temperature Data

    • Ata Kamyabi-Gol
    • Patricio F. Mendez

    OriginalPaper 25 November 2014 Pages: 622 - 638

    

11. Effect of Pre-straining on the Shape Recovery of Fe-Mn-Si-Cr-Ni Shape Memory Alloys

    • Bikas C. Maji
    • Madangopal Krishnan
    • Ranjit K. Ray

    OriginalPaper 11 November 2014 Pages: 639 - 655

    

12. The Effect of the Rate of Cooling from High-Temperature Single-Phase Region on the Microstructure and Magnetic Properties of AlNi Alloys

    • Vladimir P. Menushenkov
    • Mikhail V. Gorshenkov
    • Dmitry G. Zhukov

    OriginalPaper 12 December 2014 Pages: 656 - 664

    

13. Cracks in Martensite Plates as Hydrogen Traps in a Bearing Steel

    • W. Solano-Alvarez
    • Eun Ju Song
    • H. K. D. H. Bhadeshia

    OriginalPaper 03 December 2014 Pages: 665 - 673

    

14. Kinetics of Uniaxial Tensile Flow and Work Hardening Behavior of Type 316L(N) Austenitic Stainless Steel in the Framework of Two-Internal-Variable Approach

    • J. Christopher
    • B. K. Choudhary

    OriginalPaper 19 November 2014 Pages: 674 - 687

    

15. Revealing the Intrinsic Nanohardness of Lath Martensite in Low Carbon Steel

    • B. B. He
    • M. X. Huang

    OriginalPaper 04 December 2014 Pages: 688 - 694

    

16. Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content

    • G. V. Prasad Reddy
    • A. Nagesha
    • K. Bhanu Sankara Rao

    OriginalPaper 20 November 2014 Pages: 695 - 707

    

17. Influence of Casting Defects on S–N Fatigue Behavior of Ni-Al Bronze

    • Aritra Sarkar
    • Abhishek Chakrabarti
    • T. Jayakumar

    OriginalPaper 03 December 2014 Pages: 708 - 725

    

18. Kinetic Study of the Competitive Growth Between θ-Al₂O₃ and α-Al₂O₃ During the Early Stages of Oxidation of β-(Ni,Pt)Al Bond Coat Systems: Effects of Low Oxygen Partial Pressure and Temperature

    • J. M. Alvarado-Orozco
    • R. Morales-Estrella
    • J. Munoz-Saldana

    OriginalPaper 03 December 2014 Pages: 726 - 738

    

19. Microstructural Evolution of INCONEL^® Alloy 740H^® Fusion Welds During Creep

    • Daniel H. Bechetti
    • John N. DuPont
    • Masashi Watanabe

    OriginalPaper 06 December 2014 Pages: 739 - 755

    

20. Microstructure and Mechanical Properties of Dissimilar Welded Ti₃Al/Ni-Based Superalloy Joint Using a Ni-Cu Filler Alloy

    • Bing-Qing Chen
    • Hua-Ping Xiong
    • Si-Yi Tang

    OriginalPaper 18 November 2014 Pages: 756 - 761

    

21. Characterization of Newly Developed Semisolid Stir Joining Method for Cast Cu Base Alloy (Cu-Al-Si-Fe) and Effect of Stirrer Type on Uniformity of Microstructure

    • Keyvan Ferasat
    • Hossein Aashuri
    • Mahdi Shafizadeh

    OriginalPaper 18 November 2014 Pages: 762 - 770

    

22. Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy

    • A. Laik
    • A. A. Shirzadi
    • G. K. Dey

    OriginalPaper Open access 27 November 2014 Pages: 771 - 782

    

23. Effect of Welding Temperature on Microstructure of Friction-stir Welded Aluminum Alloy 1050

    • Sergey Mironov
    • Kosuke Inagaki
    • Hiroyuki Kokawa

    OriginalPaper 04 November 2014 Pages: 783 - 790

    

24. Plasma-Sprayed High Entropy Alloys: Microstructure and Properties of AlCoCrFeNi and MnCoCrFeNi

    • Andrew Siao Ming Ang
    • Christopher C. Berndt
    • B. S. Murty

    OriginalPaper 12 November 2014 Pages: 791 - 800

    

25. Crystallographic Textures Resulting from Severe Shear Deformation in Machining

    • Saurabh Basu
    • M. Ravi Shankar

    OriginalPaper 25 November 2014 Pages: 801 - 812

    

26. Formation of Nanostructures in Severely Deformed High-Strength Steel Induced by High-Frequency Ultrasonic Impact Treatment

    • R. K. Dutta
    • L. Malet
    • I. M. Richardson

    OriginalPaper 18 November 2014 Pages: 813 - 830

    

27. Surface Modification of Micro-Alloyed High-Strength Low-Alloy Steel by Controlled TIG Arcing Process

    • P. K. Ghosh
    • Ravindra Kumar

    OriginalPaper 25 November 2014 Pages: 831 - 842

    

28. The Partition Coefficients of Components in Cu-Ni-Mn Alloys

    • V. E. Bazhenov
    • M. V. Pikunov
    • V. V. Cheverikin

    OriginalPaper 11 November 2014 Pages: 843 - 850

    

29. Microstructural Evolution in Novel Suction Cast Multicomponent Ti-Fe-Co Alloys

    • Sumanta Samal
    • Swapnil Agarwal
    • Krishanu Biswas

    OriginalPaper 04 December 2014 Pages: 851 - 868

    

30. High Strength and Ductility of Ultrathin Laminate Foils Using Accumulative Roll Bonding and Asymmetric Rolling

    • Hailiang Yu
    • Kiet Tieu
    • Charlie Kong

    OriginalPaper 04 November 2014 Pages: 869 - 879

    

31. Preparation of Ag-Ni-Cu Composite Material by Ultrasonic Arc Spray Forming and Accumulative Roll Bonding and the Evolution of Its Microstructure

    • Ke Zhang
    • Guo-Yi Qin
    • Guang Ma

    OriginalPaper 04 November 2014 Pages: 880 - 886

    

32. Microstructure and Grain Growth of the Matrix of SiC_f/Ti-6Al-4V Composites Prepared by the Consolidation of Matrix-Coated Fibers in the α+β Phase Field

    • Guangming Zhao
    • Yanqing Yang
    • Yan Chen

    OriginalPaper 14 November 2014 Pages: 887 - 893

    

33. Hall–Petch Breakdown in Fine-Grained Pure Magnesium at Low Strain Rates

    • Hidetoshi Somekawa
    • Toshiji Mukai

    OriginalPaper 15 November 2014 Pages: 894 - 902

    

34. The Development of High Performance Ti-6Al-4V Alloy via a Unique Microstructural Design with Bimodal Grain Size Distribution

    • Sanjay Kumar Vajpai
    • Mie Ota
    • Kei Ameyama

    OriginalPaper 11 November 2014 Pages: 903 - 914

    

35. Texture Evolution in Nanocrystalline Nickel: Critical Role of Strain Path

    • R. Madhavan
    • S. Nagaraju
    • Satyam Suwas

    OriginalPaper 03 December 2014 Pages: 915 - 925

    

36. Phase-Field Model for Mixed-Mode of Growth Applied to Austenite to Ferrite Transformation

    • Avisor Bhattacharya
    • C. S. Upadhyay
    • S. Sangal

    OriginalPaper 02 December 2014 Pages: 926 - 936

    

37. Constraints Imposed by the Wilshire Methodology on Creep Rupture Data and Procedures for Testing the Validity of Such Constraints: Illustration Using 1Cr-1Mo-0.25V Steel

    • Mark Evans

    OriginalPaper 18 November 2014 Pages: 937 - 947

    

38. Three-Dimensional Phase-Field Simulation and Experimental Validation of β-Mg₁₇Al₁₂ Phase Precipitation in Mg-Al-Based Alloys

    • Guomin Han
    • Zhiqiang Han
    • Baicheng Liu

    OriginalPaper 04 December 2014 Pages: 948 - 962

    

39. A One-Dimensional Model of the Electrical Resistance Sintering Process

    • J. M. Montes
    • F. G. Cuevas
    • P. Urban

    OriginalPaper 14 November 2014 Pages: 963 - 980

    

40. Phase-Field Simulations and Analysis of Effect of Dispersed Particles on Migration of Delta to Gamma Transformation Interface

    • Daisuke Sato
    • Munekazu Ohno
    • Kiyotaka Matsuura

    OriginalPaper 11 November 2014 Pages: 981 - 988

    

41. Influence of Prior Fatigue Damage on Tensile Properties of 316L(N) Stainless Steel and Modified 9Cr-1Mo Steel

    • K. Mariappan
    • Vani Shankar
    • A. K. Bhaduri

    OriginalPaper 02 December 2014 Pages: 989 - 1003