1. Twinning-Induced Plasticity Aided High Ductile Duplex Stainless Steel

   • Jeom Yong Choi
   • Si Woo Hwang
   • Kyung-Tae Park

   Communication 20 December 2012 Pages: 597 - 601

   

2. Interfacial Microstructure and Mechanical Strength of 93W/Ta Diffusion-Bonded Joints with Ni Interlayer

   • Guoqiang Luo
   • Jian Zhang
   • Lianmeng Zhang

   Communication 14 December 2012 Pages: 602 - 605

   

3. Foreword

   • Maciej Pietrzyk
   • Łukasz Madej

   Symposium: Multi-Scale Modeling of Microstructure Deformation in Materials Processing 11 December 2012 Pages: 606 - 606

4. Application of Microprobe Analysis to the Reconstruction and Characterization of Dendritic Structures

   • Josef Domitner
   • Abdellah Kharicha
   • Andreas Ludwig

   Symposium: Multi-Scale Modeling of Microstructure Deformation in Materials Processing 22 March 2012 Pages: 607 - 616

   

5. Investigating Damage Evolution at the Nanoscale: Molecular Dynamics Simulations of Nanovoid Growth in Single-Crystal Aluminum

   • M. A. Bhatia
   • K. N. Solanki
   • M. A. Tschopp

   Symposium: Multi-Scale Modeling of Microstructure Deformation on Materials Processing 10 February 2012 Pages: 617 - 626

   

6. Correlation Between Experimental and Calculated Phase Fractions in Aged 20Cr32Ni1Nb Austenitic Stainless Steels Containing Nitrogen

   • Matthew P. Dewar
   • Adrian P. Gerlich

   OriginalPaper 10 October 2012 Pages: 627 - 639

   

7. Microstructure Evolution in Directionally Solidified Fe-Ni Alloys in Diffusive Regime

   • Z. R. Feng
   • J. Shen
   • H. Z. Fu

   OriginalPaper 29 September 2012 Pages: 640 - 649

   

8. Simultaneous Observation of Melt Flow and Motion of Equiaxed Crystals During Solidification Using a Dual Phase Particle Image Velocimetry Technique. Part I: Stage Characterization of Melt Flow and Equiaxed Crystal Motion

   • Abdellah Kharicha
   • Mihaela Stefan-Kharicha
   • Menghuai Wu

   OriginalPaper 19 September 2012 Pages: 650 - 660

   

9. Simultaneous Observation of Melt Flow and Motion of Equiaxed Crystals During Solidification Using a Dual Phase Particle Image Velocimetry Technique. Part II: Relative Velocities

   • Abdellah Kharicha
   • Mihaela Stefan-Kharicha
   • Menghuai Wu

   OriginalPaper 19 September 2012 Pages: 661 - 668

   

10. Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

    • J. H. Li
    • S. Suetsugu
    • P. Schumacher

    OriginalPaper 22 September 2012 Pages: 669 - 681

    

11. Formation and Phase Selection of Iron-Rich Intermetallics in Al-4.6Cu-0.5Fe Cast Alloys

    • K. Liu
    • X. Cao
    • X.-G. Chen

    OriginalPaper 18 September 2012 Pages: 682 - 695

    

12. Comparison in the Oxidation and Corrosion Behavior of Aluminum and Alumina-Reinforced Ni/Ni-Co Alloy Coatings

    • Meenu Srivastava
    • J. N. Balaraju
    • V. K. William Grips

    OriginalPaper 10 October 2012 Pages: 696 - 707

    

13. Effect of Heat Treatment on Niobium Segregation of Laser-Cladded IN718 Alloy Coating

    • Yaocheng Zhang
    • Zhuguo Li
    • Yixiong Wu

    OriginalPaper 23 October 2012 Pages: 708 - 716

    

14. Austenite Grain Structures in Ti- and Nb-Containing High-Strength Low-Alloy Steel During Slab Reheating

    • S. Roy
    • D. Chakrabarti
    • G. K. Dey

    OriginalPaper 17 October 2012 Pages: 717 - 728

    

15. Bubble Formation at a Submerged Orifice for Aluminum Foams Produced by Gas Injection Method

    • Xueliu Fan
    • Xiang Chen
    • Yanxiang Li

    OriginalPaper 26 September 2012 Pages: 729 - 737

    

16. Interdiffusion, Intrinsic Diffusion, Atomic Mobility, and Vacancy Wind Effect in γ(bcc) Uranium-Molybdenum Alloy

    • Ke Huang
    • Dennis D. Keiser Jr.
    • Yongho Sohn

    OriginalPaper 02 October 2012 Pages: 738 - 746

    

17. Vacuum Evaporation of Pure Metals

    • Jafar Safarian
    • Thorvald A. Engh

    OriginalPaper Open access 17 October 2012 Pages: 747 - 753

    

18. Characterization of Nickel Diffusion and its Effect on the Microstructure of Nickel PM Steels

    • Bernard Tougas
    • Carl Blais
    • Sylvain Pelletier

    OriginalPaper 27 September 2012 Pages: 754 - 765

    

19. Hydrogen Effect on Nanomechanical Properties of the Nitrided Steel

    • Afrooz Barnoush
    • Masoud Asgari
    • Rune Hoel

    OriginalPaper 17 October 2012 Pages: 766 - 775

    

20. Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) Steels

    • Seokmin Hong
    • Sang Yong Shin
    • Nack J. Kim

    OriginalPaper 17 October 2012 Pages: 776 - 786

    

21. Portevin–Le Chatelier Effects in a High-Mn Austenitic Steel

    • Giorgio Scavino
    • Carolina Di Salvo
    • Donato Firrao

    OriginalPaper 28 September 2012 Pages: 787 - 792

    

22. Microstructure and Microtexture Evolution of Shear Localization in Dynamic Deformation with Different Strains in Annealed Copper

    • Lin Tang
    • Zhiyong Chen
    • Chuming Liu

    OriginalPaper 26 September 2012 Pages: 793 - 805

    

23. Texture Evolution and Residual Stress Relaxation in a Cold-Rolled Al-Mg-Si-Cu Alloy Using Vibratory Stress Relief Technique

    • Jia-Siang Wang
    • Chih-Chun Hsieh
    • Weite Wu

    OriginalPaper 17 October 2012 Pages: 806 - 818

    

24. Effect of Sn Additions on the Damage Tolerance of a ZrCuNiAl Bulk Metallic Glass

    • C. C. Yuan
    • X. X. Xia
    • X. K. Xi

    OriginalPaper 10 October 2012 Pages: 819 - 826

    

25. Surface Hardening of Powder Injection Molded 316L Stainless Steels Through Low-Temperature Carburization

    • Li-Hui Cheng
    • Kuen-Shyang Hwang

    OriginalPaper 09 October 2012 Pages: 827 - 834

    

26. Engineered Coatings for Ni Alloys in High Temperature Reactors

    • Elizabeth A. Clark
    • James Y. Yang
    • Carlos G. Levi

    OriginalPaper 26 September 2012 Pages: 835 - 847

    

27. High Strength and Retained Ductility Achieved in a Nitrided Strip Cast Nb-Microalloyed Steel

    • Kelvin Y. Xie
    • Sachin L. Shrestha
    • Simon P. Ringer

    OriginalPaper 02 October 2012 Pages: 848 - 855

    

28. The Role of Silicon in the Solidification of High-Cr Cast Irons

    • A. Bedolla-Jacuinde
    • M. W. Rainforth
    • I. Mejía

    OriginalPaper 26 September 2012 Pages: 856 - 872

    

29. Direct Simulation of a Solidification Benchmark Experiment

    • Tommy Carozzani
    • Charles-André Gandin
    • Yves Fautrelle

    OriginalPaper 25 October 2012 Pages: 873 - 887

    

30. Evaluation of the Inertness of Investment Casting Molds Using Both Sessile Drop and Centrifugal Casting Methods

    • Xu Cheng
    • Chen Yuan
    • Paul Withey

    OriginalPaper 10 October 2012 Pages: 888 - 898

    

31. Optimization of Blended-Elemental Powder-Based Titanium Alloy Extrusions for Aerospace Applications

    • Sami M. El-Soudani
    • Kuang-O. Yu
    • Vlad A. Duz

    OriginalPaper 26 September 2012 Pages: 899 - 910

    

32. On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel During Cold Rolling

    • Christian Haase
    • Sandip Ghosh Chowdhury
    • Günter Gottstein

    OriginalPaper 27 November 2012 Pages: 911 - 922

    

33. Spark-Plasma Sintering of W-5.6Ni-1.4Fe Heavy Alloys: Densification and Grain Growth

    • Ke Hu
    • Xiaoqiang Li
    • Yuanyuan Li

    OriginalPaper 11 October 2012 Pages: 923 - 933

    

34. Ultrafine-Grained Al-Mg-Sc Alloy via Friction-Stir Processing

    • Nilesh Kumar
    • Rajiv S. Mishra

    OriginalPaper 17 October 2012 Pages: 934 - 945

    

35. Quenching and Partitioning (Q&P) Processing of Martensitic Stainless Steels

    • Javad Mola
    • Bruno C. De Cooman

    OriginalPaper 15 September 2012 Pages: 946 - 967

    

36. Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V

    • Fude Wang
    • Stewart Williams
    • Alphons A. Antonysamy

    OriginalPaper 28 September 2012 Pages: 968 - 977

    

37. Texture Development in the Ni₄₇Ti₄₄Nb₉ Shape Memory Alloy During Successive Thermomechanical Processing and Its Effect on Shape Memory and Mechanical Properties

    • Y. Yan
    • W. Jin
    • X. W. Li

    OriginalPaper 17 October 2012 Pages: 978 - 989

    

38. Development of a High-Strength Ultrafine-Grained Ferritic Steel Nanocomposite

    • Roohollah Rahmanifard
    • Hasan Farhangi
    • Samira Moniri

    OriginalPaper 17 October 2012 Pages: 990 - 998

    

39. Titanium Carbide Reinforcement in Iron Matrix Through Carbothermal Reduction of Mechanically Milled Hematite and Anatase

    • Hussain Zuhailawati
    • Mohd Salihin Hassin
    • Samayamutthirian Palaniandy

    OriginalPaper 28 September 2012 Pages: 999 - 1009

    

40. Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants

    • Kwai S. Chan
    • Marie Koike
    • Toru Okabe

    OriginalPaper 17 October 2012 Pages: 1010 - 1022

    

41. Effects of Solute and Surfactant Addition on the Crystallization and Morphology of Hydroxyapatite Powders Synthesized by Hydrolysis of Calcium Hydrogen Phosphate Dehydrate (DCPD)

    • Hui-Ting Chen
    • Hsin-Fang Chang
    • Wei-Jen Shih

    OriginalPaper 17 October 2012 Pages: 1023 - 1033

    

42. Fatigue Life of Cast Titanium Alloys Under Simulated Denture Framework Displacements

    • Mari Koike
    • Kwai S. Chan
    • Toru Okabe

    OriginalPaper 02 October 2012 Pages: 1034 - 1044

    

43. The Small Fatigue Crack Growth Behavior of an AM60 Magnesium Alloy

    • Zhe Chen
    • Amit Shyam
    • Carl J. Boehlert

    OriginalPaper 03 October 2012 Pages: 1045 - 1058

    

44. Interaction Between Eutectic Intermetallic Particles and Dispersoids in the 3003 Aluminum Alloy During Homogenization Treatments

    • M. Dehmas
    • E. Aeby-Gautier
    • M. Serrière

    OriginalPaper 18 October 2012 Pages: 1059 - 1073

    

45. The Role of Alloy Composition and T7 Heat Treatment in Enhancing Thermal Conductivity of Aluminum High Pressure Diecastings

    • Roger N. Lumley
    • Natalia Deeva
    • Joe Freeman

    OriginalPaper 27 September 2012 Pages: 1074 - 1086

    

46. Ultrafine-Grain Structure Formation in an Al-Mg-Sc Alloy During Warm ECAP

    • Oleg Sitdikov
    • Elena Avtokratova
    • Kaneaki Tsuzaki

    OriginalPaper 26 September 2012 Pages: 1087 - 1100

    

47. Influence of Extrusion on the Microstructure and Mechanical Behavior of Mg-9Li-3Al-xSr Alloys

    • Yan Yang
    • Xiaodong Peng
    • Enrique J. Lavernia

    OriginalPaper 07 November 2012 Pages: 1101 - 1113

    

48. Electrochemical Impedance Spectroscopy and Corrosion Behavior of Co/CeO₂ Nanocomposite Coatings in Simulating Body Fluid Solution

    • Lidia Benea

    OriginalPaper 02 October 2012 Pages: 1114 - 1122

    

49. Nitride Nanoparticle Addition to Beneficially Reinforce Hybrid Magnesium Alloys

    • Muralidharan Paramsothy
    • Jimmy Chan
    • Manoj Gupta

    OriginalPaper 05 October 2012 Pages: 1123 - 1138

    

50. An Interface-Enriched eXtended Finite Element-Level Set Simulation of Solutal Melting of Additive Powder Particles during Transient Liquid Phase Bonding

    • A. Ghoneim
    • J. Hunedy
    • O. A. Ojo

    OriginalPaper 17 October 2012 Pages: 1139 - 1151