1. Cavitation erosion of age-hardenable aluminum alloys

   • S. Vaidya
   • C. M. Preece

   Mechanical Behavior Pages: 299 - 307

2. Oxide morphology and spalling model for NiAl

   • James L. Smialek

   Environmental Interactions Pages: 309 - 320

3. The influence of intercritical heat treatment on the temper embrittlement susceptibility of aP-Doped Ni-Cr steel

   • A. H. Ucisik
   • C. J. McMahon
   • H. C. Feng

   Mechanical Behavior Pages: 321 - 329

4. Further considerations on the inconsistency in toughness evaluation of AISI 4340 steel austenitized at increasing temperatures

   • Robert O. Ritchie
   • R. M. Horn

   Mechanical Behavior Pages: 331 - 341

5. Precipitation of carbides in low-carbon Fe-AI-C alloys

   • W. C. Leslie
   • G. C. Rauch

   Alloy Phases and Structure Pages: 343 - 349

6. Slow crystallographic fatigue crack growth in a nickel-base alloy

   • Sampath Purushothaman
   • John K. Tien

   Mechanical Behavior Pages: 351 - 355

7. Limitations of potentiostatic control in stress corrosion crack growth measurements

   • P. Doig
   • P. E. J. Flewitt

   Environmental Interactions Pages: 357 - 362

8. Precipitation at interphase boundaries

   • H. I. Aaronson
   • M. R. Plichta
   • K. C. Russell

   Transformations Pages: 363 - 371

9. Determination of local composition by lattice imaging

   • R. Sinclair
   • G. Thomas

   Alloy Phases and Structure Pages: 373 - 379

10. Lattice imaging and optical microanalysis of a Cu-Ni-Cr spinodal alloy

    • C. K. Wu
    • R. Sinclair
    • G. Thomas

    Alloy Phases and Structure Pages: 381 - 387

11. Effect of electrodeposited metals on the permeation of hydrogen through iron membranes

    • S. S. Chatterjee
    • B. G. Ateya
    • H. W. Pickering

    Tansport Phenomena Pages: 389 - 395

12. The composition of eta carbide in hastelloy N after aging 10,000 h at 815°C

    • J. M. Leitnaker
    • G. A. Potter
    • W. R. Laing

    Alloy Phases and Structure Pages: 397 - 400

13. Nucleation, undercooling and homogeneous structures in rapidly solidified powders

    • J. P. Hirth

    Physical Chemistry Pages: 401 - 404

14. Ductility in hot isostatically pressed 250-Grade maraging steel

    • R. M. German
    • J. E. Smugeresky

    Mechanical Behavior Pages: 405 - 412

15. A notch analysis of fracture approach to fatigue crack propagation

    • D. N. Lal
    • V. Weiss

    Mechanical Behavior Pages: 413 - 426

16. Surface cracking in α- β titanium alloys under unidirectional loading

    • Yashwant Mahajan
    • Harold Margolin

    OriginalPaper Pages: 427 - 431

17. Coarsening of tungsten grains in liquid nickel-tungsten matrix

    • Thae-Khapp Kang
    • Duk N. Yoon

    OriginalPaper Pages: 433 - 438

18. Retained austenite and tempered martensite embrittlement

    • Gareth Thomas

    OriginalPaper Pages: 439 - 450

19. The mechanical properties of zero- carbon ferrite-plus-martensite structures

    • R. G. Davies

    OriginalPaper Pages: 451 - 455

20. Early stage precipitation kinetics in an Al-Zn-Mg and an Al-Zn-Mg-Ti alloy

    • Peter J. Brofman
    • Gary Judd

    Communications Pages: 457 - 458

21. Multiple dislocation motion

    • R. J. Arsenault
    • C. T. K. Kuo

    Communications Pages: 459 - 460

22. The heats of transformation of the high-pressure orthorhombic modification of indium antimonide

    • A. K. Jena
    • M. B. Bever
    • M. D. Banus

    Communications Pages: 461 - 462

23. Annealing of In_xGa_1-xSb ingots

    • Sanghamitra Sen
    • William R. Wilcox
    • Robert A. Lefever

    Communications Pages: 462 - 464