1. How are new orientations generated during primary recrystallization?

   • Peter Haasen

   The 1992 Edward Campbell Memorial Lecture ASM INTERNATIONAL Pages: 1001 - 1015

2. A thermodynamic evaluation of the Fe-Cr-Mn-C system

   • Byeong-Joo Lee

   OriginalPaper Pages: 1017 - 1025

3. Metastable crystalline and amorphous structures formed in the Cu-W system by vapor deposition

   • H. F. Rizzo
   • T. B. Massalski
   • M. Nastasi

   OriginalPaper Pages: 1027 - 1037

4. The microstructure of discontinuously precipitated lamellae in an austenitic Fe-42.4 Wt Pct Ni- 4.15 Wt Pct AI-0.45 Wt Pct C alloy

   • Jeong S. Lee
   • Woong K. Choo

   OriginalPaper Pages: 1039 - 1047

5. Nonuniform recrystallization in a mechanically alloyed nickel-base superalloy

   • K. Murakami
   • K. Mino
   • H. K. D. H. Bhadeshia

   OriginalPaper Pages: 1049 - 1055

6. Orientation relationships between M₂C carbide and the austenite matrix in an Fe-Mn-AI-Mo-C alloy

   • Shang-Wen Peng
   • Chang-Pin Chou

   OriginalPaper Pages: 1057 - 1065

7. Internal friction due to thermoelastic martensitic transformation

   • T. Xiao

   OriginalPaper Pages: 1067 - 1071

8. Potassium bubbles in tungsten wire

   • C. L. Briant

   OriginalPaper Pages: 1073 - 1084

9. The absence of relative grain translation during superplastic deformation of an Al-Li-Mg-Cu-Zr alloy

   • P. L. Blackwell
   • P. S. Bate

   OriginalPaper Pages: 1085 - 1093

10. Hydrogen tolerance of a Ti₃AI-based alloy

    • Kwai S. Chan

    OriginalPaper Pages: 1095 - 1105

11. Shear rate thickening flow behavior of semisolid slurries

    • Pratyush Kumar
    • Christophe L. Martin
    • Stuart Brown

    OriginalPaper Pages: 1107 - 1116

12. Residual strain gradient determination in metal matrix composites by synchrotron X-ray energy dispersive diffraction

    • Todd A. Kuntz
    • Haydn N. G. Wadley
    • David R. Black

    OriginalPaper Pages: 1117 - 1124

13. Strain-rate effects on high-temperature fracture behavior of a 2124AI-SiC_w composite

    • Dongil Kwon
    • Sunghak Lee
    • Byung-Il Roh

    OriginalPaper Pages: 1125 - 1131

14. Fracture toughness analysis of heat-affected zones in high-strength low-alloy steel welds

    • Sunghak Lee
    • Byung Chun Kim
    • Dongil Kwon

    OriginalPaper Pages: 1133 - 1141

15. A better sheet formability test

    • M. P. Miles
    • J. L. Siles
    • K. Narasimhan

    OriginalPaper Pages: 1143 - 1151

16. The combined effect of grain size and strain rate on the dislocation substructures and mechanical properties in pure aluminum

    • Deepak Sil
    • S. K. Varma

    OriginalPaper Pages: 1153 - 1161

17. The composition of the solid solution, structure, and contact fatigue of the case-hardened layer

    • Bertold Vinokur

    OriginalPaper Pages: 1163 - 1168

18. Microstructural characterization of INCOLOY 903 weldments

    • R. Nakkalil
    • N. L. Richards
    • M. C. Chaturvedi

    OriginalPaper Pages: 1169 - 1179

19. Surface hardening of Ti-6AI-4V alloy by electrochemical hydrogenation

    • Tair-I Wu
    • Jiann-Kuo Wu

    OriginalPaper Pages: 1181 - 1185

20. Spray deposition of a Sn-40 Wt Pct Pb alloy with uniform droplets

    • Christian H. Passow
    • Jung-Hoon Chun
    • Teiichi Ando

    OriginalPaper Pages: 1187 - 1193

21. Heterogeneous nucleation of solidification of Si by solid AI in hypoeutectic Al-Si alloy

    • D. L. Zhang
    • B. Cantor

    OriginalPaper Pages: 1195 - 1204

22. Martensitic-transformation sequence in a Ti₅₀Ni₄₇Pd₃ alloy

    • Y. C. Lo
    • S. K. Wu

    Communication Pages: 1205 - 1208

23. Cooperative grain-boundary sliding in mechanically alloyed in 90211 alloy during high strain rate superplasticity

    • M. G. Zelin
    • T. R. Bieler
    • A. K. Mukherjee

    Communication Pages: 1208 - 1212

24. Thermodynamics of Si-C-O system

    • N. S. Jacobson
    • E. J. Opila

    Communication Pages: 1212 - 1214