1. Fluorescent poly(p-phenylene vinylene)/poly(ethylene oxide) nanofibers obtained by electrospinning

   • Yi Xin
   • Zonghao Huang
   • Sidong Liu

   Original Paper 27 April 2010 Pages: 477 - 482

   

2. Preparation of expandable graphite using a hydrothermal method and flame-retardant properties of its halogen-free flame-retardant HDPE composites

   • Kuang-Chung Tsai
   • Hsu-Chiang Kuan
   • Chin-Lung Chiang

   Original Paper 28 April 2010 Pages: 483 - 488

   

3. Dynamic stress relaxation behavior of nanogel filled elastomers

   • Suman Mitra
   • Santanu Chattopadhyay
   • Anil K. Bhowmick

   Original Paper 28 April 2010 Pages: 489 - 497

   

4. Synthesis of novel biodegradable material poly(lactic acid-trimesic acid) via direct melt copolycondensation and its characterization

   • Zhao-Yang Wang
   • Yu-Fen Luo
   • Xiu-Mei Song

   Original Paper 28 April 2010 Pages: 499 - 508

   

5. Modeling and optimization of a new impact-toughened epoxy nanocomposite using response surface methodology

   • Abdolreza Mirmohseni
   • Siamak Zavareh

   Original Paper 05 May 2010 Pages: 509 - 517

   

6. Modeling the kinetics of anionic polymerization in cyclohexane as a non-complexing solvent

   • Pastor Rivero
   • Rafael Herrera

   Original Paper 18 May 2010 Pages: 519 - 526

   

7. ¹H-NMR study of maleic anhydride modified ethylene-diene copolymers

   • Ana I. Vicente
   • Sónia G. Pereira
   • M. Rosário Ribeiro

   Original Paper 12 May 2010 Pages: 527 - 532

   

8. Enhancement of processability and foamability of ground tire rubber powder and LDPE blends through solid state shear milling

   • Jian Zhu
   • Xinxing Zhang
   • Canhui Lu

   Original Paper 14 May 2010 Pages: 533 - 539

   

9. Functionalization of polyamide surface by radiation-induced grafting of N-vinyl-pyrrolidone and acrylamide

   • Grażyna Przybytniak
   • Ewa M. Kornacka
   • Leon Fuks

   Original Paper 21 May 2010 Pages: 541 - 547

   

10. Polyamides containing quinoxaline moiety

    • Vidyadhar B. Patil
    • Maheboob M. Sayyed
    • Noormahmad N. Maldar

    Original Paper 19 May 2010 Pages: 549 - 557

    

11. Atom transfer radical polymerization of monomers containing amide and ester moieties monitored by dilatometric method

    • M. Judith Percino
    • Víctor M. Chapela
    • Margarita Cerón

    Original Paper 29 June 2010 Pages: 559 - 568

    

12. Dynamic mechanical, thermal, physico-mechanical and morphological properties of LLDPE/EMA blends

    • Jyoti S. Borah
    • Tapan Kumar Chaki

    Original Paper 03 June 2010 Pages: 569 - 578

    

13. Multiwalled carbon nanotubes incorporated bombyx mori silk nanofibers by electrospinning

    • Kai Wei
    • Jian-hua Xia
    • Ick-Soo Kim

    Original Paper 25 May 2010 Pages: 579 - 585

    

14. Preparation of monodisperse poly(methyl methacrylate) microspheres: effect of reaction parameters on particle formation, and optical performances of its diffusive agent application

    • Ching-Wen Chen
    • Chuh-Yung Chen
    • Chih-Lung Lin

    Original Paper 02 June 2010 Pages: 587 - 594

    

15. Effects of FeCl₃/ammonium persulfate composite oxidant and magnetic field on film growth rate of polyaniline doped with dodecylbenzenesulfonic acid

    • Li Ma
    • Wen-yi Su
    • Lai-zheng Luo

    Original Paper 05 June 2010 Pages: 595 - 599

    

16. Solvent effects on polymerization of functionalized monomers in presence of alkyl halide/CuBr without a ligand

    • Bibiana A. Yáñez-Martínez
    • Judith Percino
    • Guillermo Soriano-Moro

    Original Paper 12 June 2010 Pages: 601 - 613

    

17. Effect of acrylic acid and hydroxyethyl methacrylate modified nano-SiO₂ particles on poly(methyl methacrylate-hydroxyethyl methacrylate) soap-free emulsion polymerization

    • Fa-Ai Zhang
    • Jian-Shu Kang
    • Cai-Li Yu

    Original Paper 08 June 2010 Pages: 615 - 620

    

18. Reaction kinetics and physical properties of unsaturated polyester modified with methylacyloxylpropyl-POSS

    • Jun-gang Gao
    • Shi-rong Li
    • De-juan Kong

    Original Paper 25 June 2010 Pages: 621 - 626

    

19. Characterization of nylon 6/ABS blends with and without a maleated polybutadiene as compatibilizer

    • F.-C. Chiu
    • Sun-Mou Lai
    • C.-C. Chen

    Original Paper 24 June 2010 Pages: 627 - 635

    

20. Synthesis and properties of new thermally stable poly(amide-imide)s containing flexible ether moieties

    • Khalil Faghihi
    • Meisam Shabanian
    • Fatemeh Shabani

    Original Paper 10 June 2010 Pages: 637 - 644

    

21. Oxa-perfluoroalkyl end-capped PEG-based amphiphilic fluorocarbon polymer: synthesis and self-assembly behavior in water

    • Hong Li
    • Hui-Qing Chen
    • Yong-Ming Zhang

    Original Paper 10 July 2010 Pages: 645 - 650

    

22. Preparation and characterization of star-shaped nylon 6 with high flowability

    • Peng Fu
    • Maoli Wang
    • Qingxiang Zhao

    Original Paper 09 July 2010 Pages: 651 - 657

    

23. Investigation of structure and conductivity properties of polyaniline synthesized by solid–solid reaction

    • Imene Bekri-Abbes
    • Ezzeddine Srasra

    Original Paper 02 July 2010 Pages: 659 - 665

    

24. Macroporous polymeric hydrogels formed from acrylate modified polyvinyl alcohol macromers

    • Alexander A. Artyukhov
    • Mikhail I. Shtilman
    • Aristidis M. Tsatsakis

    Original Paper 25 June 2010 Pages: 667 - 673

    

25. Shear induced crystallization of poly(L-lactide) and poly(ethylene glycol) (PLLA-PEG-PLLA) copolymers with different block length

    • Xiao Hu
    • Jia-Zhuang Xu
    • Zhong-Ming Li

    Original Paper 29 June 2010 Pages: 675 - 680

    

26. The investigation on states of water in different hydrophilic polymers by DSC and FTIR

    • Lan Guan
    • Hongyan Xu
    • Dinghai Huang

    Original Paper 02 July 2010 Pages: 681 - 689

    

27. Solid state polymerization and intercalation of aniline in Fe rich montmorillonite

    • Imene Bekri-Abbes
    • Ezzeddine Srasra

    Original Paper 03 July 2010 Pages: 691 - 699

    

28. Synthesis and characterization of biodegradable thermosensitive neutral and acidic poly(organophosphazene) gels bearing carboxylic acid group

    • Jung-Kyo Cho
    • Sun Mi Lee
    • Soo-Chang Song

    Original Paper 06 July 2010 Pages: 701 - 713

    

29. Miscibility, properties and morphology of biodegradable blends of UHMW-PPC/PVA/EVOH

    • Xi Chen
    • S. J. Wang
    • Yuezhong Meng

    Original Paper 23 July 2010 Pages: 715 - 720

    

30. UV-curable waterborne polyurethane acrylate modified with octavinyl POSS for weatherable coating applications

    • Xin Wang
    • Yuan Hu
    • Ganxin Jie

    Original Paper 13 July 2010 Pages: 721 - 729

    

31. Oxetanyl-functionalized 9-aryl[3,3′]bicarbazolyl derivatives as building blocks for electro-active polymers

    • Simona Lengvinaite
    • Juozas V. Grazulevicius
    • Vygintas Jankauskas

    Original Paper 13 July 2010 Pages: 731 - 737

    

32. Preparation and characterization of a Bacterial cellulose/Chitosan composite for potential biomedical application

    • Jaehwan Kim
    • Zhijiang Cai
    • Chulhee Jo

    Original Paper 23 July 2010 Pages: 739 - 744

    

33. Controlled preparation of Fe₃O₄/P (St-MA) magnetic composite microspheres by DPE method

    • Feige Guo
    • Qiuyu Zhang
    • Junwei Gu

    Original Paper 20 July 2010 Pages: 745 - 751

    

34. Synthesis, characterization and solution properties of a double-hydrophilic multiblock copolymer with sulfonic groups

    • Xu Du
    • Yebang Tan
    • Xiaona Ren

    Original Paper 23 July 2010 Pages: 753 - 762

    

35. Characterization of gamma irradiated plasticized starch/poly(vinyl alcohol) (PLST/PVA) blends and their application as protected edible materials

    • Magdy M. Senna
    • Hussein A. El-Shahat
    • Abdel Wahab M. El-Naggar

    Original Paper 29 July 2010 Pages: 763 - 771

    

36. Preparation of glass fiber clothes reinforced polytetrafluoroethylene film composites using plasma for polytetrafluoroethylene surface modification

    • Wan-Fu Lien
    • Wen-Cheng Liaw
    • Huang-Shian Tsai

    Original Paper 06 August 2010 Pages: 773 - 780

    

37. Effect of service temperature on structure and mechanical properties of polyamide 6 & 66 tyre cords

    • Soghra Ramazani
    • Mohammad Morshed
    • Mohammad Ghane

    Original Paper 12 August 2010 Pages: 781 - 792

    

38. Stabilization of bulk aggregation state in semiconducting polymer solutions

    • Chi Chung Hua
    • Chih Jung Lin
    • Show An Chen

    Original Paper 28 July 2010 Pages: 793 - 800

    

39. Effects of gamma irradiation with and without compatibilizer on the mechanical properties of polypropylene/wood flour composites

    • Sarawut Rimdusit
    • Sujittra Wongsongyot
    • Sunan Tiptipakorn

    Original Paper 29 July 2010 Pages: 801 - 809

    

40. Effect of silane coupling agent on the dielectric and thermal properties of DGEBA-forsterite composites

    • T. S. Sasikala
    • S. Raman
    • M. T. Sebastian

    Original Paper 04 August 2010 Pages: 811 - 819

    

41. Correlation of rheology and morphology and estimation of interfacial tension of immiscible COC/EVA blends

    • Seyed-Hassan Jafari
    • Mohammad-Nabi Hesabi
    • Mohsen Asl-Rahimi

    Original Paper 01 September 2010 Pages: 821 - 831

    

42. New poly (urethane-methacrylate)s obtained by adjusting the structure of the polyols moieties: synthesis, transparent, thermal and mechanical properties

    • Lijun Gao
    • Liming Zhou
    • Songtao Ma

    Original Paper 01 October 2010 Pages: 833 - 841

    

43. Effect of clay content and clay/surfactant on the mechanical, thermal and barrier properties of polystyrene/organoclay nanocomposites

    • Artee Arora
    • Veena Choudhary
    • D. K. Sharma

    Original Paper 24 August 2010 Pages: 843 - 857