Volume 74, Issue 3

Search all European Journal of Wood and Wood Products articles

May 2016

Special Issue: COST Action FP1004: Enhance mechanical properties of timber, engineered wood products and timber structures

Issue Editor:

Richard Harris

21 articles in this issue

Enhance mechanical properties of timber, engineered wood products and timber structures. Special Issue based upon work from COST Action FP1004, supported by COST (European Cooperation in Science and Technology)
Richard Harris
Jan-Willem van de Kuilen
Editorial 11 April 2016 Pages: 281 - 283
On the identifiability of stiffness components of clear wood from a 3D off-axes prismatic specimen: angle orientation and friction effects
J. Xavier
A. Majano-Majano
J. Fernandez-Cabo
Original 18 March 2016 Pages: 285 - 290
Strength grading of sawn timber in Europe: an explanation for engineers and researchers
Dan Ridley-Ellis
Peter Stapel
Vanesa Baño
Original 22 March 2016 Pages: 291 - 306
Moisture-induced stresses in glulam frames
Sigurdur Ormarsson
Óskar V. Gíslason
Original 01 March 2016 Pages: 307 - 318
Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems
I. Robert Kliger
Reza Haghani
Kay-Uwe Schober
Original 03 October 2015 Pages: 319 - 330
Cross laminated timber (CLT): overview and development
R. Brandner
G. Flatscher
A. Thiel
Original 19 January 2016 Pages: 331 - 351
Vibration serviceability performance of timber floors
J. Weckendorf
T. Toratti
T. Tannert
Original 19 October 2015 Pages: 353 - 367
Hybrid connections for timber structures
Kay-Uwe Schober
Thomas Tannert
Original 03 March 2016 Pages: 369 - 377
Pull-compression tests on glued-in metric thread rods parallel to grain in glulam and laminated veneer lumber of different timber species
Frank Hunger
Mislav Stepinac
Jan-Willem G. van de Kuilen
Original 12 January 2016 Pages: 379 - 391
Cyclic behaviour of glulam shear walls with bolted connections
Daniela Wrzesniak
Massimo Fragiacomo
Original 15 March 2016 Pages: 393 - 405
Some structural design issues of the 14-storey timber framed building “Treet” in Norway
K. A. Malo
R. B. Abrahamsen
M. A. Bjertnæs
Original Open access 18 March 2016 Pages: 407 - 424
Shake table tests on a full-scale timber-frame building with gypsum fibre boards
Daniele Casagrande
Paolo Grossi
Roberto Tomasi
Original 12 February 2016 Pages: 425 - 442
Timber-concrete-composites increasing the use of timber in construction
A. Dias
J. Skinner
T. Tannert
Original 09 October 2015 Pages: 443 - 451
Stress-laminated-timber decks: state of the art and design based on Swedish practice
Roberto Crocetti
Kristoffer Ekholm
Robert Kliger
Original 23 September 2015 Pages: 453 - 461
Glued-in rods in beech laminated veneer lumber
M. Stepinac
V. Rajčić
J. W. G. van de Kuilen
Brief Original 08 April 2016 Pages: 463 - 466
Finite element modelling of inclined screwed timber to timber connections with a large gap between the elements
Coralie Avez
Thierry Descamps
Laurent Léoskool
Brief Original 14 January 2016 Pages: 467 - 471
Study on timber compression forces induced by self-tapping screw fasteners
I. Giongo
Brief Original 30 July 2015 Pages: 473 - 475
GFRP connectors for thin topping timber-concrete composites
Jonathan Skinner
Elin Salisbury
Richard Harris
Brief Original 03 October 2015 Pages: 477 - 479
Load-carrying capacity and failure modes of glulam beams with reinforced notches
Robert Jockwer
René Steiger
Erik Serrano
Brief Original 28 August 2015 Pages: 481 - 482
Prefabricated timber-concrete composite floors
T. Sartori
R. Crocetti
Brief Original 01 February 2016 Pages: 483 - 485
Numerical analysis of tall CLT-concrete buildings with mechanical connections
Z. Y. Xia
J. W. G. van de Kuilen
Brief Original 29 March 2016 Pages: 487 - 489

Volume 74, Issue 3

Search

Navigation