Abstract
This article describes experiments for producing highly intense metal ion beams at the ECR source of the DC-60 cyclotron using the evaporation of organometallic compounds by the MIVOC method. As a result of the works, beams of nickel, cobalt, chromium, and silicon ions are obtained. The optimization of modes of acceleration for the ion beams to an energy of 1.75 MeV/n is carried out.
Similar content being viewed by others
REFERENCES
S. L. Bogomolov et al., “Production of intense metal ion beams from ECR ion sources using the MIVOC method,” Phys. Part. Nucl. Lett. 12, 824–830 (2015).
V. N. Loginov et al., “Production of intense ion beams of boron and iron using the MIVOC method from ECR ion source on the DC-60 cyclotron,” Phys. Part. Nucl. Lett. 15, 627–629 (2018).
H. Koivisto, J. Arje, and M. Nurmia, “Metal ions from the volatile compounds method for the production of metal ion beams,” Rev. Sci. Instrum. 69, 785–787 (1998).
H. Koivisto, J. Arje, and M. Nurmia, “Metal ion beams from an ECR ion source using volatile compounds,” Nucl. Instrum. Methods Phys. Res., Sect. B 94, 291–296 (1994).
H. Waldmann and B. Martin, Nucl. Instrum. Methods Phys. Res., Sect. B 98, 532 (1995).
V. N. Loginov et al., “Production of intense metal ion beams at the DC-60 cyclotron,” J. Instrum., No. 2 (14) (2019).
B. Gikal et al., “DC-60 heavy ion cyclotron complex: the first beams and project parameters,” Phys. Part. Nucl. Lett. 5, 642–644 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by M. Samokhina
Rights and permissions
About this article
Cite this article
Loginov, V.N., Bondarchenko, A.E., Bogomolov, S.L. et al. Production of Intense Ion Beams of Nickel, Chromium, Silicon, and Cobalt at the DC-60 Cyclotron. Phys. Part. Nuclei Lett. 17, 193–196 (2020). https://doi.org/10.1134/S1547477120020120
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1547477120020120