Abstract
The effect of austempering temperature on the microstructure and properties of a high chromium white cast iron was investigated with the Rietveld refinement method. The result shows that the upper bainite exists in the sample austempered at 623 K and the martensite, lower bainite, M7C3, and retained austenite exist in the samples austempered at 563 K and 593 K. The relative content of the retained austenite increases with increasing the austempering temperature from 563 K to 623 K. The higher hardness, impact toughness and impact abrasive wear resistance can be obtained for the specimen austempered at 593 K.
Similar content being viewed by others
References
Hann S K, Gates J D. A Transformation Toughening White Cast Iron [J]. J Mater Sci, 1997, 32(5): 1249.
Tabrett C P, Sare I R. Fracture Toughness of High-Chromium White Irons: Influence of Cast Structure [J]. J Mater Sci, 2000, 35(8): 2069.
NI Feng, ZHANG Yong-zhen, LUO Xia, et al. Wear Characteristics of High Chromium White Cast Iron Under Heavy Load and Low Speed Dry Sliding Friction [J]. Journal of Iron and Steel Research, 2002, 14(3): 52 (in Chinese).
SUN Zhi-ping, SHEN Bao-luo, WANG Jun, et al. Effect of Manganese on As-Cast Microstructure and Hardening Behavior of High Chromium White Cast Iron [J]. Journal of Iron and Steel Research, International, 2005, 12(1): 34.
SUN Zhi-ping, ZUO Ru-lin, LI Cong, et al. TEM Study on Precipitation and Transformation of Secondary Carbides in 16Cr-lMo-lCu White Iron Subjected to Subcriticai Treatment [J]. Mater Charact, 2004, 53(5). 403.
Wiengmoon A, Chairuangsri T, Brown A, et al. Microstructural and Crystallographical Study of Carbides in 30wt%Cr Cast Irons [J]. Acta Mater, 2005, 53(15): 4143.
Tabrett C P, Sare I R, Ghomashchi M R. Microstructure-Property Relationships in High Chromium White Iron Alloys [J]. Int Mater Rev, 1996, 41(2): 59.
WANG Gui, ZHANG Yang-huan, MA Yong-lin, et al. Effect of Heat Treatment on Microstructure and Mechanical Properties of High-Chromium White Cast Iron [J]. J Baotou University of Iron and Steel Tech, 1998, 17(3): 203 (in Chinese).
CHEN He-xing, CHANG Zhe-chuan, LU Jin-cai, et al. Effect of Niobium on Wear Resistance of 15%Cr White Cast Iron [J]. Wear, 1993, 166(2). 197.
Fulcher J K, Kosel T H, Fiore N F. The Effect of Carbide Volume Fraction on the Low Stress Abrasion Resistance of High Cr-Mo White Irons [J]. Wear, 1983, 84(3): 313.
Sare I R. Wear Resistance and Fracture Toughness of White Cast Irons [J]. Met Technol, 1979, 6(11): 412.
Putatunda S K. Influence of Austempering Temperature on Microstructure and Fracture Toughness of High-Carbon, High-Silicon and High-Manganese Cast Steel [J]. Mater Design, 2003, 24(6): 435.
LIU Sheng-fa, AI Xiao-ling. Effects of Austempering Temperature and Time on Mechanical Properties of Spheroidal Graphite Malleable Cast Iron [J]. Modern Cast Iron, 2005, (1): 7 (in Chinese).
Sohi M H, Ahmadabadi M N, Vahdat A B. The Role of Austempering Parameters on the Structure and Mechanical Properties of Heavy Section ADI [J]. J Mater Process Tech, 2004, 153–154(10): 203.
WEN Jiu-ba, LI Qian, LONG Yong-qiang. Effect of Austempering on Microstructure and Mechanical Properties of a GCrl8Mo Steel [J]. Mat Sci Eng, 2006, 438–440A(25): 251.
HOU Qing-yu, HE Yi-zhu, GAO Jia-sheng. Microstructure and Properties of Fe-C-Cr-Cu Coating Deposited by Plasma Transferred Àrc Process [J]. Surf Coat Tech, 2006, 201(6): 3685.
Beneteaua A, Weisbeckera P, Geandierb G, et al. Austenitization and Precipitate Dissolution in High Nitrogen Steels: An in Situ High Temperature X-Ray Synchrotron Diffraction Analysis Using the Rietveld Method [J]. Mat Sci Eng A, 2005, 393(1-2): 63.
Sahu P, Pradhan S K, De M. X-Ray Diffraction Studies of the Decomposition and Microstructural Characterization of Cold-Worked Powders of Cu-15Ni-Sn Alloys by Rietveld Analysis [J]. J Alloy Compd, 2004, 377(1–2): 103.
Izumi F, Ikeda T. A Rietveld-Analysis Program RIETAN-98 and Its Applications to Zeolites [J]. Mater Sci Forum, 2000, 321–324: 198.
Pearce J T H. Structure and Wear Performance of Abrasion Resistant Chromium White Cast Irons [J]. AFS Trans, 1984, 92: 599.
LIU Sheng-fa. Development of Austempered Mn-Cr White Cast Iron [J]. Heat Treat Met, 2004, 29(3): 34 (in Chinese).
XI Jun-tong, ZHOU Qing-de, LIU Shi-hui. et al. Influence of Retained Austenite on the Wear Resistance of High Chromium Cast Irons Under Various Impact Loads [J], Wear, 1993, 162–164(Part 1): 83.
Gahr K H Z, Doane D V. Optimizing Fracture Toughness and Abrasion Resistance in White Cast Irons [J]. Metall Mater Trans A, 1980, 11(4): 613.
Weber K, Regener D, Mehner H, et al. Characterization of the Microstructure of High-Chromium Cast Irons Using Mossbauer Spectroscopy [J]. Mater Charact, 2001, 46(5): 399.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by Key Project on Natural Science for the Education Department of Anhui Province (2006KJ080A)
Rights and permissions
About this article
Cite this article
Hou, Qy., Huang, Zy. & Wang, Jt. Application of Rietveld refinement to investigate the high chromium white cast iron austempered at different temperatures. J. Iron Steel Res. Int. 16, 33–38 (2009). https://doi.org/10.1016/S1006-706X(09)60057-1
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(09)60057-1