This is a preview of subscription content, log in via an institution to check access.
References (discusser)
Hu, J. W. (2008). Seismic performance evaluations and analyses for composite moment frames with smart SMA PR-CFT connections. Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA.
Hu, J. W. (2013). “Design and strength evaluation of critical gusset plate in the steel bridge using new LRFD methods and advanced FE analyses.” ISIJ Int., 53(8), pp. 1452–1461.
Hu, J. W. and Leon, R. T. (2011). “Analyses and evaluations for composite-moment frames with SMA PR-CFT connections.” Nonlin. Dyna., 65(4): doi: 10.1007/s11071-010-9903-3.
Hu, J. W., Choi, E., and Leon, R. T. (2011a). “Design, analysis, and application of innovative composite PR connections between steel beams and CFT columns.” Smart Mater. Struct., 20(2), doi: 10.1088/0964-1726/20/2/025019.
Hu, J. W., Kang, Y. S., Choi, D. H., and Park, T. (2010a). “Seismic design, performance, and behavior of composite — moment frames with steel beam-to-concrete filled tube column connections.” International Journal of Steel Structures, 10(2), pp. 177–191.
Hu, J. W., Kim, D. K., and Choi, E. (2013). “Numerical investigation on the cyclic behavior of smart recentering clip-angle connections with superelastic shape memory alloy fasteners.” Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci., 227(4), pp. 806–818.
Hu, J. W., Kim, D. K., Leon, R. T., and Choi, E. (2011b). “Analytical studies of full-scale steel T-sub connections using delicate 3D finite element methods.” ISIJ Int., 51(4), pp. 619–629.
Hu, J. W., Leon, R. T., and Choi, E. (2011c). “Investigation on the inelastic behavior of full-scale heavy clip-angle connections.” International Journal of Steel Structures, 11(1), pp. 1–11.
Hu, J. W., Leon, R. T., and Park T. (2012). “Mechanical models for the analysis of bolted T-stub connections under cyclic loads.” J. Constrct. Steel Res., 78, pp. 45–57.
Hu, J. W., Leon, R. T., and Park, T. (2010b). “Analytical investigation on ultimate behavior for steel heavy clipangle connections using FE analysis.” ISIJ Int., 50(6), pp. 883–892.
References
Chung, K. F. and Ip, K. H. (2001). “Finite element modeling of bolted connections between cold-formed steel strips and hot rolled steel plates under static shear.” Engineering Structures, 22, pp. 1271–1284.
Epstein, H. I. and McGinnis, M. J. (2000). “Finite element modeling of block shear in structural tees.” Computers & Structures, 77, pp. 423–599.
Kim, H. J. and Yura, J. A. (1999). “The effect of ultimateto-yield ratio on the bearing strength of bolted connections.” Journal of Constructional Steel Research, 49. pp. 255–269.
Kim, T. S. (2006). A Numerical Study on Ultimate Behavior of Bolted Connections in Thin Walled Stainless Steel Plates. Ph.D. Dissertation, The University of Tokyo, Japan.
Kim, T. S. and Kuwamura, H. (2007). “Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear.” Thin-Walled Structures, 45, pp. 407–421.
Kim, T. S. and Kuwamura, H. (2011a). “Numerical investigation on strength design and curling effect of mechanically fastened joints in cold-formed austenitic stainless steel.” Materials and Design, 32, pp. 3942–3956.
Kim, T. S. and Lim, J. S. (2011b). “Parametric Analysis for Ultimate Strength Prediction of Stainless Steel Bolted Joints with Single Bolt.” Advanced Materials Research, 255–260, pp. 79–83.
Kim, T. S., Kuwamura, H., and Cho, T. J. (2008a). “A parametric study on ultimate strength of single shear bolted connections with curling.” Thin-Walled Structures, 46, pp. 38–53.
Kim, T. S., Kuwamura, H., Cho, T. J., Shin, S. H., Kim, S. H., and Lee, Y. T. (2008b). Investigation on mechanical behaviors for bolted connections in carbon steel and in stainless steel using FEM.” ISIJ International, 48(6), pp. 851–860.
Kim, T. S., Kuwamura, H., Kim S. H., and Cho, T. J. (2009). “Investigation on ultimate strength of thin-walled steel single shear bolted connections with two bolts using finite element analysis.” Thin-Walled Structures, 47, pp. 1191–1202.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Hu, JW., Kim, T. & Lim, J. Discussions and closures. Int J Steel Struct 13, 569–576 (2013). https://doi.org/10.1007/s13296-013-3015-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-013-3015-0