Abstract
Various rapid heating methods have been developed to increase the productivity of press hardening steel. One of these methods is direct resistance Joule heating. This heating method results in the melting of the surface coating and the formation of a persistent liquid trail as a result of the high thermal conductivity and low melting temperature of the Al-10 pct Si alloy coating. This can be addressed by an alloying preheating treatment prior to the press hardening process.
Similar content being viewed by others
References
M. Kleiner, M. Geiger and A. Klaus: CIRP Annals-Manufacturing Technology, 52 (2005) 521-542.
[2] H. Karbasian, A.E. Tekkaya, J. Mater. Process. Technol., 210 (15) (2010) 2103-2118.
D. W. Fan, H. S. Kim, B. C. De Cooman, Steel Research International, 80 (3) (2009) 241-248.
H. Liu, X. Jin, H. Dong, J. Shi (2011) Mater. Charact. 62:223–227
K. Kusumi, S. Yamamoro, T. Takeshita, and M. Abe: 2nd International conference on hot sheet metal forming of high-performance Steel, Luleå, Sweden, 2009, pp. 97–104.
K. Steinhoff, N. Barbakadze, M. Schupfer, Galvatech 2011 Conference, Genova, Italy, 2011, pp. 319–326.
D.W. Fan, H.S. Kim, J.K. Oh, K.G. Chin, and B.C. De Cooman, ISIJ Int., 50 (2010) 561-568.
[8] C. W. Lee, B. C. De Cooman, Metallurgical and Materials Transaction A, 45 (2014) 4499-4509.
[9] C. W. Lee, D. W. Fan, I. R. Sohn, S. J. Lee, B. C. De Cooman, Metallurgical and Materials Transaction A, 43 (2012) 5122-5127.
[10] K. Mori, S. Maki, Y. Tanaka, CIRP Annals-Manufacturing Technology, 54 (1) (2005) 209-212.
[11] R. Kolleck, R. Veit, M. Merklein, J. Lechler, M. Geiger, CIRP Annals-Manufacturing Technology, 58 (1) (2009) 275-278.
V. Ploshikhin, A. Prihodovsky, J. Kaiser, U. Bach, WO2010048950, 2010.
H. Lehmann: 3rd International conference on hot sheet metal forming of high-performance steel, Kassel, Germany, 2011, pp. 171–87.
[14] K. Satô, Trans. JIM 4 (1963) 121–124.
[15] C. Alléy, L. Dosdat, O. Clauzeau, K. Ogle, P. Volovitch, Surface & Coatings Technology 238 (2014) 188-196.
M. Suehiro, K. Kusumi, T. Miyakoshi, J. Maki, M. Ohgami, Nippon Steel Technical Report 88 (2003) 16-21.
[17] T. W. Brown, J. Coryell, P. Belanger, J. G. Speer, D. K. Matlock, International Symposium on New Developments in Advanced High-Strength Sheet Steels, Warrendale, USA, 2013, pp.263-274
[18] Kattner UR, Burton BP. Phase diagrams of binary iron alloys, H. Okamoto, ASM International, Materials Park, OH, 1993. p. 12.
[19] C. C. Bidwell, C. L. Hogan, Journal of Applied Physics 18 (1947) 776-779.
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted May 26, 2015.
Rights and permissions
About this article
Cite this article
Lee, C.W., Choi, W.S., Cho, Y.R. et al. Direct Resistance Joule Heating of Al-10 pct Si-Coated Press Hardening Steel. Metall Mater Trans A 47, 2875–2884 (2016). https://doi.org/10.1007/s11661-016-3467-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-016-3467-x