Abstract
The titanosilicate type CDS-1 zeolite ([Ti]CDS-1) with CDO topology can be prepared from the corresponding zeolitic layered titanosilicate [Ti]PLS-1 via dehydrative condensation of interlayers’ Q 3 silanols. The precursor [Ti]PLS-1 is successfully synthesized from the mixture of an acidified kanemite, titanium tetraisopropoxide (Ti(OiPr)4), a small amount of hydrogen peroxide (H2O2), tetramethylammonium hydroxide (TMAOH) and water (H2O) under hydrothermal synthesis. The obtained samples were characterized by powder-XRD, TG–DTA, N2 adsorption, solid state NMR and UV–Vis analyses. Further oxidation reaction of terminal alkenes was examined by using H2O2 as an oxidant.
Similar content being viewed by others
References
J. Čejka, A. Corma, S. Zones (eds.), Zeolites and Catalysis, Synthesis, Reactions and Applications (Wiley, Weinheim, 2010)
C.S. Cundy, P.A. Cox, Chem. Rev. 103, 663 (2003)
A. Corma, Chem. Rev. 97, 2373 (1997)
B. Yilmaz, U. Muller, Top. Catal. 52, 888 (2009)
T. Ikeda, Y. Akiyama, Y. Oumi, A. Kawai, F. Mizukami, Angew. Chem. Int. Ed. 43, 4892 (2004)
C. Baerlocher, L.B. McCusker, D.H. Olson, Atras of Zeolite Framework Types, sixth revised Ed. (2007) or see International Zeolite Association at http://www.iza-structure.org/databeses/
T. Ikeda, S. Kayamori, F. Mizukami, J. Mater. Chem. 19, 5518 (2009)
J.A. Rabo, in Zeolite Microporous Solids: Synthesis, Structure, and Reactivity, ed. by E.G. Derouane, F. Lemos, C. Naccache, F.R. Ribeiro (Kluwer Academic Publishers, Dordrecht, 1992), pp. 531–552
T. Tatsumi, in Metals in Zeolites for Oxidation Catalysis, Zeolites and Catalysis, Synthesis, Reactions and Applications, Chapter 23, ed. by J. Čejka, A. Corma, S. Zones (Wiley, Weinheim, 2010)
J.S. Reddy, R. Kumar, P. Ratnasamy, Appl. Catal. 58, L1 (1990)
D.P. Serrano, H.-X. Li, M.E. Davis, J. Chem. Soc. Chem. Commun. 745 (1992)
M.A. Camblor, A. Corma, A. Martínez, J.P. Pariente, Chem. Commun. 28, 589 (1992)
T. Blasco, M.A. Camblor, A. Corma, P. Esteve, A. Martínez, C. Prieto, S. Valencia, Chem. Commun. 32, 2367 (1996)
N. Jappar, Q. Xia, T. Tatsumi, J. Catal. 180, 132 (1998)
A. Tuel, Zeolites 15, 228 (1995)
P. Wu, T. Komatsu, T. Yashima, J. Phys. Chem. 100, 10316 (1996)
A. Corma, M.J.D. Cabanas, M.E. Domine, F.Z. Rey, Chem. Commun. 36, 1725 (2000)
P. Wu, T. Tatsumi, T. Komatsu, T. Yashima, Chem. Lett. 29, 774 (2000)
K. Komura, T. Murase, Y. Sugi, M. Koketsu, Chem. Lett. 39, 948 (2010)
H. Suzuoki, S. Takegawa, K. Komura, J. Jpn. Petrol. Inst. 57, 184 (2014)
T. Murase, K. Komura, J. Porous Mater. 23, 11 (2016)
Acknowledgments
This work is supported by JSPS KAKENHI Grant Number 15K05586.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Murase, T., Komura, K. Hydrothermal synthesis of titanosilicate type zeolitic layered PLS-1 and CDS-1 molecular sieve with CDO topology. J Porous Mater 24, 203–209 (2017). https://doi.org/10.1007/s10934-016-0253-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-016-0253-5