Skip to main content

Advertisement

SpringerLink
Log in

A Review of the Sustainable Approaches in the Production of Bio-based Polyurethanes and Their Applications in the Adhesive Field

  • Review
  • Published:
Journal of Polymers and the Environment Aims and scope Submit manuscript

Abstract

On account of the irreversible environmental damage caused by the utilization of non-renewable raw materials in industrial production, since the end of the twentieth century, the interest in replacing the traditionally applied petroleum-based starting compounds in the polyurethane production by more sustainable feedstocks has grown enormously. Such pursuit of Green Chemistry has been fostered by the implementation of a set of national and international initiatives and stricter regulations, especially in the field of adhesives. In this respect, the latest advances in the production of bio-based polyurethanes are collected in this review. Thus, after a brief introduction to this subject and main tendencies towards the production of more sustainable polyurethanes, the first section reviews the feasibility of manufacturing polyurethanes from a range of natural platforms, including lignocellulosic biomass and vegetable oils, whether modified or in their original form, along with some industrial wastes. Afterwards, the hitherto considered synthetic routes for the preparation of greener polyurethanes are assessed, encompassing waterborne, radiation-curable and non-isocyanate polyurethane techniques. Finally, the last section focuses on the research advancement on the synthesis, properties and different uses of bio-based polyurethanes specifically implemented in the field of adhesives.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  1. Bayer O (1947) Das di-isocyanat-polyadditionsverfahren (polyurethane). Angew Chem 59:257–272. https://doi.org/10.1002/ange.19470590901

    Article  Google Scholar 

  2. Szycher M (2013) Szycher’s handbook of polyurethanes. CRC Press, New York

    Google Scholar 

  3. The Statistics Portal. https://www.statista.com/statistics/747004/polyurethane-demand-worldwide/. Accessed 17 Nov 2019

  4. More AS, Lebarbé T, Maisonneuve L, Gadenne B, Alfos C, Cramail H (2013) Novel fatty acid based di-isocyanates towards the synthesis of thermoplastic polyurethanes. Eur Polym J 49:823–833

    Article  CAS  Google Scholar 

  5. Cherng JY, Hou TY, Shih MF, Talsma H, Hennink WE (2013) Polyurethane-based drug delivery systems. Int J Pharm 450:145–162

    Article  CAS  PubMed  Google Scholar 

  6. Abdollahi MF, Zandi M, Shokrollahi P, Ehsani M (2015) Synthesis and characterization of curcumin segmented polyurethane with induced antiplatelet activity. J Polym Res 22:1–10

    Article  CAS  Google Scholar 

  7. Kupka V, Vojtova L, Fohlerova Z, Jancar J (2016) Solvent free synthesis and structural evaluation of polyurethane films based on poly (ethylene glycol) and poly (caprolactone). Express Polym Lett 10:479–492. https://doi.org/10.3144/expresspolymlett.2016.46

    Article  CAS  Google Scholar 

  8. Rezayan AH, Firoozi N, Kheirjou S, Tabatabaei Rezaei SJ, Nabid MR (2017) Synthesis and characterization of biodegradable semi-interpenetrating polymer networks based on star-shaped copolymers of varepsilon-caprolactone and lactide. Iran J Pharm Res 16:63–73

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  9. Su S, Gu J, Lee H, Yu S, Wu C, Suen M (2016) Effects of an aromatic fluoro-diol and polycaprolactone on the properties of the resultant polyurethanes. Adv Polym Technol 37(4):1142–1152

    Article  CAS  Google Scholar 

  10. Wu C, Tsou C, Tseng Y, Lee H, Suen M, Gu J, Tsou C, Chiu S (2016) Preparation and characterization of biodegradable polyurethanes composites filled with silver nanoparticles-decorated graphene. J Polym Res 23:263

    Article  CAS  Google Scholar 

  11. Zhu R, Wang Y, Zhang Z, Ma D, Wang X (2016) Synthesis of polycarbonate urethane elastomers and effects of the chemical structures on their thermal, mechanical and biocompatibility properties. Heliyon 2:e00125

    Article  PubMed  PubMed Central  Google Scholar 

  12. Calvo-Correas T, Martin MD, Retegi A, Gabilondo N, Corcuera MA, Eceiza A (2016) Synthesis and characterization of polyurethanes with high renewable carbon content and tailored properties. ACS Sustain Chem Eng 4:5684–5692. https://doi.org/10.1021/acssuschemeng.6b01578

    Article  CAS  Google Scholar 

  13. Calvo-Correas T, Santamaria-Echart A, Saralegi A, Martin L, Valea Á, Corcuera MA, Eceiza A (2015) Thermally-responsive biopolyurethanes from a biobased diisocyanate. Eur Polym J 70:173–185. https://doi.org/10.1016/j.eurpolymj.2015.07.022

    Article  CAS  Google Scholar 

  14. Li Y, Noordover BA, van Benthem RA, Koning CE (2014) Reactivity and regio-selectivity of renewable building blocks for the synthesis of water-dispersible polyurethane prepolymers. ACS Sustain Chem Eng 2:788–797

    Article  CAS  Google Scholar 

  15. Basterretxea A, Haga Y, Sanchez-Sanchez A, Isik M, Irusta L, Tanaka M, Fukushima K, Sardon H (2016) Biocompatibility and hemocompatibility evaluation of polyether urethanes synthesized using DBU organocatalyst. Eur Polym J 84:750–758

    Article  CAS  Google Scholar 

  16. Kavanaugh TE, Clark AY, Chan-Chan LH, Ramírez-Saldaña M, Vargas-Coronado RF, Cervantes-Uc JM, Hernández-Sánchez F, García AJ, Cauich-Rodríguez JV (2016) Human mesenchymal stem cell behavior on segmented polyurethanes prepared with biologically active chain extenders. J Mater Sci Mater Med 2:71–77

    Google Scholar 

  17. Oprea S, Potolinca VO, Gradinariu P, Joga A, Oprea V (2016) Synthesis, properties, and fungal degradation of castor-oil-based polyurethane composites with different cellulose contents. Cellulose 23:2515–2526. https://doi.org/10.1007/s10570-016-0972-4

    Article  CAS  Google Scholar 

  18. Dubé MA, Salehpour S (2014) Applying the principles of green chemistry to polymer production technology. Macromol React Eng 8:7–28. https://doi.org/10.1002/mren.201300103

    Article  CAS  Google Scholar 

  19. Octave S, Thomas D (2009) Biorefinery: toward an industrial metabolism. Biochimie 91:659–664

    Article  CAS  PubMed  Google Scholar 

  20. Isikgor FH, Becer CR (2015) Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers. Polym Chem 6:4497–4559

    Article  CAS  Google Scholar 

  21. Jeong H, Park J, Kim S, Lee J, Ahn N, Roh H (2013) Preparation and characterization of thermoplastic polyurethanes using partially acetylated kraft lignin. Fibers Polym 14:1082–1093

    Article  CAS  Google Scholar 

  22. Griffini G, Passoni V, Suriano R, Levi M, Turri S (2015) Polyurethane coatings based on chemically unmodified fractionated lignin. ACS Sustain Chem Eng 3:1145–1154

    Article  CAS  Google Scholar 

  23. Araujo RCS, Pasa VMD (2003) Mechanical and thermal properties of polyurethane elastomers based on hydroxyl-terminated polybutadienes and biopitch. J Appl Polym Sci 88:759–766

    Article  CAS  Google Scholar 

  24. Gallego R, Arteaga JF, Valencia C, Díaz MJ, Franco JM (2015) Gel-like dispersions of HMDI-cross-linked lignocellulosic materials in castor oil: toward completely renewable lubricating grease formulations. ACS Sustain Chem Eng 3:2130–2141. https://doi.org/10.1021/acssuschemeng.5b00389

    Article  CAS  Google Scholar 

  25. Gallego R, Cidade T, Sánchez R, Valencia C, Franco J (2016) Tribological behaviour of novel chemically modified biopolymer-thickened lubricating greases investigated in a steel–steel rotating ball-on-three plates tribology cell. Tribol Int 94:652–660

    Article  CAS  Google Scholar 

  26. Gallego R, Arteaga J, Valencia C, Franco J (2013) Rheology and thermal degradation of isocyanate-functionalized methyl cellulose-based oleogels. Carbohydr Polym 98:152–160. https://doi.org/10.1016/j.carbpol.2013.04.104

    Article  CAS  PubMed  Google Scholar 

  27. Gallego R, Arteaga J, Valencia C, Franco J (2013) Chemical modification of methyl cellulose with HMDI to modulate the thickening properties in castor oil. Cellulose 20:495–507. https://doi.org/10.1007/s10570-012-9803-4

    Article  CAS  Google Scholar 

  28. Gallego R, Arteaga JF, Valencia C, Franco JM (2015) Thickening properties of several NCO-functionalized cellulose derivatives in castor oil. Chem Eng Sci 134:260–268. https://doi.org/10.1016/j.ces.2015.05.007

    Article  CAS  Google Scholar 

  29. Borrero-López AM, Valencia C, Franco J (2017) Rheology of lignin-based chemical oleogels prepared using diisocyanate crosslinkers: effect of the diisocyanate and curing kinetics. Eur Polym J 89:311–323. https://doi.org/10.1016/j.eurpolymj.2017.02.020

    Article  CAS  Google Scholar 

  30. Borrero-López AM, Blánquez A, Valencia C, Hernández M, Arias ME, Eugenio ME, Fillat U, Franco JM (2018) Valorization of soda lignin from wheat straw solid-state fermentation: production of oleogels. ACS Sustain Chem Eng 6:5198–5205. https://doi.org/10.1021/acssuschemeng.7b04846

    Article  CAS  Google Scholar 

  31. Borrero-López AM, Blánquez A, Valencia C, Hernández M, Arias ME, Franco JM (2019) Influence of solid-state fermentation with Streptomyces on the ability of wheat and barley straws to thicken castor oil for lubricating purposes. Ind Crops Prod 140:111625

    Article  CAS  Google Scholar 

  32. Daneshvar S, Behrooz R, Najafi SK, Sadeghi GMM (2018) Characterization of polyurethane wood adhesive prepared from liquefied sawdust by ethylene carbonate. BioResources 14:796–815

    Google Scholar 

  33. Desai SD, Emanuel AL, Sinha VK (2003) Biomaterial based polyurethane adhesive for bonding rubber and wood joints. J Polym Res 10:275–281

    Article  CAS  Google Scholar 

  34. Mishra D, Sinha VK (2010) Eco-economical polyurethane wood adhesives from cellulosic waste: synthesis, characterization and adhesion study. Int J Adhes Adhes 30:47–54. https://doi.org/10.1016/j.ijadhadh.2009.08.003

    Article  CAS  Google Scholar 

  35. Patel CM, Barot AA, Kumar Sinha V (2016) Sequential liquefaction of Nicotiana tabacum stems biomass by crude polyhydric alcohols for the production of polyols and rigid polyurethane foams. J Appl Polym Sci 133:43974

    Article  CAS  Google Scholar 

  36. Zhou W, Fu W, Zhang Y (2018) Liquefaction of banana pseudo-stem and preparation of polyurethane adhesive from liquefied products. J Wuhan Univ Technol 33:1437–1443

    Article  CAS  Google Scholar 

  37. Soares B, Gama N, Freire CS, Barros-Timmons A, Brandão I, Silva R, Neto CP, Ferreira A (2015) Spent coffee grounds as a renewable source for ecopolyols production. J Chem Technol Biotechnol 90:1480–1488

    Article  CAS  Google Scholar 

  38. Liang L, Mao Z, Li Y, Wan C, Wang T, Zhang L, Zhang L (2007) Liquefaction of crop residues for polyol production. BioResources 1:248–256

    Google Scholar 

  39. Kim KH, Yu J, Lee EY (2016) Crude glycerol-mediated liquefaction of saccharification residues of sunflower stalks for production of lignin biopolyols. J Ind Eng Chem 38:175–180

    Article  CAS  Google Scholar 

  40. Lee J, Lee JH, Kim D, Park C, Yu J, Lee EY (2016) Crude glycerol-mediated liquefaction of empty fruit bunches saccharification residues for preparation of biopolyurethane. J Ind Eng Chem 34:157–164

    Article  CAS  Google Scholar 

  41. Gandini A (2008) Polymers from renewable resources: a challenge for the future of macromolecular materials. Macromolecules 41:9491–9504

    Article  CAS  Google Scholar 

  42. Raquez J, Deléglise M, Lacrampe M, Krawczak P (2010) Thermosetting (bio) materials derived from renewable resources: a critical review. Prog Polym Sci 35:487–509

    Article  CAS  Google Scholar 

  43. Evtiouguina M, Barros-Timmons A, Cruz-Pinto J, Neto CP, Belgacem M, Gandini A (2002) Oxypropylation of cork and the use of the ensuing polyols in polyurethane formulations. Biomacromol 3:57–62

    Article  CAS  Google Scholar 

  44. Hojabri L, Kong X, Narine SS (2010) Novel long chain unsaturated diisocyanate from fatty acid: synthesis, characterization, and application in bio-based polyurethane. J Polym Sci A 48:3302–3310

    Article  CAS  Google Scholar 

  45. Lligadas G, Ronda JC, Galià M, Cádiz V (2010) Oleic and undecylenic acids as renewable feedstocks in the synthesis of polyols and polyurethanes. Polymers 2:440–453

    Article  CAS  Google Scholar 

  46. Sharma V, Kundu P (2006) Addition polymers from natural oils: a review. Prog Polym Sci 31:983–1008

    Article  CAS  Google Scholar 

  47. Zlatanić A, Lava C, Zhang W, Petrović ZS (2004) Effect of structure on properties of polyols and polyurethanes based on different vegetable oils. J Polym Sci Pol Phys 42:809–819

    Article  CAS  Google Scholar 

  48. Campanella A, Bonnaillie L, Wool R (2009) Polyurethane foams from soyoil-based polyols. J Appl Polym Sci 112:2567–2578. https://doi.org/10.1002/app.29898

    Article  CAS  Google Scholar 

  49. Ferreira P, Pereira R, Coelho J, Silva AF, Gil M (2007) Modification of the biopolymer castor oil with free isocyanate groups to be applied as bioadhesive. Int J Biol Macromol 40:144–152

    Article  CAS  PubMed  Google Scholar 

  50. Raghunanan LC, Fernandez-Prieto S, Martínez I, Valencia C, Sánchez MC, Franco JM (2018) Molecular insights into the mechanisms of humidity-induced changes on the bulk performance of model castor oil derived polyurethane adhesives. Eur Polym J 101:291–303. https://doi.org/10.1016/j.eurpolymj.2018.02.041

    Article  CAS  Google Scholar 

  51. Hablot E, Zheng D, Bouquey M, Avérous L (2008) Polyurethanes based on castor oil: kinetics, chemical, mechanical and thermal properties. Macromol Mater Eng 293:922–929

    Article  CAS  Google Scholar 

  52. Abdolhosseini F, Givi MKB (2016) Characterization of a biodegradable polyurethane elastomer derived from castor oil. Am J Polym Sci 6:18–27. https://doi.org/10.5923/j.ajps.20160601.03

    Article  CAS  Google Scholar 

  53. Zhang J, Yao M, Chen J, Jiang Z, Ma Y (2019) Synthesis and properties of polyurethane elastomers based on renewable castor oil polyols. J Appl Polym Sci 136:47309

    Article  CAS  Google Scholar 

  54. Sharma C, Kumar S, Unni AR, Aswal VK, Rath SK, Harikrishnan G (2014) Foam stability and polymer phase morphology of flexible polyurethane foams synthesized from castor oil. J Appl Polym Sci 131:40668. https://doi.org/10.1002/app.40668

    Article  CAS  Google Scholar 

  55. Septevani AA, Evans DA, Chaleat C, Martin DJ, Annamalai PK (2015) A systematic study substituting polyether polyol with palm kernel oil based polyester polyol in rigid polyurethane foam. Ind Crops Prod 66:16–26

    Article  CAS  Google Scholar 

  56. Nohra B, Candy L, Blanco J, Guerin C, Raoul Y, Mouloungui Z (2013) From petrochemical polyurethanes to biobased polyhydroxyurethanes. Macromolecules 46:3771–3792

    Article  CAS  Google Scholar 

  57. Narute P, Palanisamy A (2016) Study of the performance of polyurethane coatings derived from cottonseed oil polyol. J Coat Technol Res 13:171–179. https://doi.org/10.1007/s11998-015-9741-9

    Article  CAS  Google Scholar 

  58. Pechar TW, Wilkes GL, Zhou B, Luo N (2007) Characterization of soy-based polyurethane networks prepared with different diisocyanates and their blends with petroleum-based polyols. J Appl Polym Sci 106:2350–2362

    Article  CAS  Google Scholar 

  59. Mekewi MA, Ramadan AM, ElDarse FM, Rehim MHA, Mosa NA, Ibrahim MA (2017) Preparation and characterization of polyurethane plasticizer for flexible packaging applications: natural oils affirmed access. Egypt J Petrol 26:9–15. https://doi.org/10.1016/j.ejpe.2016.02.002

    Article  Google Scholar 

  60. He W, Fang Z, Ji D, Chen K, Wan Z, Li X, Gan H, Tang S, Zhang K, Guo K (2013) Epoxidation of soybean oil by continuous micro-flow system with continuous separation. Org Process Res Dev 17:1137–1141

    Article  CAS  Google Scholar 

  61. Ji D, Fang Z, He W, Zhang K, Luo Z, Wang T, Guo K (2015) Synthesis of soy-polyols using a continuous microflow system and preparation of soy-based polyurethane rigid foams. ACS Sustain Chem Eng 31:197–1204

    Google Scholar 

  62. Miao S, Zhang S, Su Z, Wang P (2010) A novel vegetable oil–lactate hybrid monomer for synthesis of high-Tg polyurethanes. J Polym Sci A 48:243–250

    Article  CAS  Google Scholar 

  63. Zhang C, Madbouly SA, Kessler MR (2015) Biobased polyurethanes prepared from different vegetable oils. ACS Appl Mater Interfaces 71:226–1233

    Google Scholar 

  64. Zhang C, Vennerberg D, Kessler MR (2015) In situ synthesis of biopolyurethane nanocomposites reinforced with modified multiwalled carbon nanotubes. J Appl Polym Sci 132:42515

    Google Scholar 

  65. Venkatesh D, Jaisankar V (2019) Synthesis and characterization of bio-polyurethanes prepared using certain bio-based polyols. Mater Today Proc 14:482–491

    Article  CAS  Google Scholar 

  66. Ang KP, Lee CS, Cheng SF, Chuah CH (2014) Synthesis of palm oil-based polyester polyol for polyurethane adhesive production. J Appl Polym Sci 131:39967

    Article  CAS  Google Scholar 

  67. Guo A, Cho Y, Petrović ZS (2000) Structure and properties of halogenated and nonhalogenated soy-based polyols. J Polym Sci Part A 38:3900–3910

    Article  CAS  Google Scholar 

  68. Desroches M, Escouvois M, Auvergne R, Caillol S, Boutevin B (2012) From vegetable oils to polyurethanes: synthetic routes to polyols and main industrial products. Polym Rev 52:38–79. https://doi.org/10.1080/15583724.2011.640443

    Article  CAS  Google Scholar 

  69. Rojek P, Prociak A (2012) Effect of different rapeseed-oil-based polyols on mechanical properties of flexible polyurethane foams. J Appl Polym Sci 125:2936–2945. https://doi.org/10.1002/app.36500

    Article  CAS  Google Scholar 

  70. Zieleniewska M, Auguścik M, Prociak A, Rojek P, Ryszkowska J (2014) Polyurethane-urea substrates from rapeseed oil-based polyol for bone tissue cultures intended for application in tissue engineering. Polym Degrad Stab 108:241–249. https://doi.org/10.1016/j.polymdegradstab.2014.03.010

    Article  CAS  Google Scholar 

  71. Głowińska E, Datta J (2015) Structure, morphology and mechanical behaviour of novel bio-based polyurethane composites with microcrystalline cellulose. Cellulose 22:2471–2481. https://doi.org/10.1007/s10570-015-0685-0

    Article  CAS  Google Scholar 

  72. Datta J, Głowińska E (2014) Effect of hydroxylated soybean oil and bio-based propanediol on the structure and thermal properties of synthesized bio-polyurethanes. Ind Crop Prod 61:84–91

    Article  CAS  Google Scholar 

  73. Datta J, Głowińska E (2014) Chemical modifications of natural oils and examples of their usage for polyurethane synthesis. J Elastom Plast 46:33–42

    Article  CAS  Google Scholar 

  74. Desappen V, Viswanathan J (2018) The cross-linked bio-based polyols prepared using vegetable oil based epoxidised oils. J Chem Biochem 6:17–27

    Google Scholar 

  75. Venkatesh D, Jaisankar V (2018) A kinetic study of certain vegetable oil based polyurethane. Int J Sci Eng Investig 7:44–51

    Google Scholar 

  76. Kong X, Liu G, Curtis JM (2012) Novel polyurethane produced from canola oil based poly (ether ester) polyols: synthesis, characterization and properties. Eur Polym J 48:2097–2106. https://doi.org/10.1016/j.eurpolymj.2012.08.012

    Article  CAS  Google Scholar 

  77. Kong X, Zhao L, Curtis JM (2016) Polyurethane nanocomposites incorporating biobased polyols and reinforced with a low fraction of cellulose nanocrystals. Carbohydr Polym 152:487–495. https://doi.org/10.1016/j.carbpol.2016.07.032

    Article  CAS  PubMed  Google Scholar 

  78. Norhisham SM, Maznee TTN, Ain HN, Devi PK, Srihanum A, Norhayati M, Yeong S, Hazimah A, Schiffman CM, Sendijarevic A (2017) Soft polyurethane elastomers with adhesion properties based on palm olein and palm oil fatty acid methyl ester polyols. Int J Adhes Adhes 73:38–44. https://doi.org/10.1016/j.ijadhadh.2016.10.012

    Article  CAS  Google Scholar 

  79. Petrović ZS, Yang L, Zlatanić A, Zhang W, Javni I (2007) Network structure and properties of polyurethanes from soybean oil. J Appl Polym Sci 105:2717–2727

    Article  CAS  Google Scholar 

  80. Monteavaro LL, da Silva EO, Costa APO, Samios D, Gerbase AE, Petzhold CL (2005) Polyurethane networks from formiated soy polyols: synthesis and mechanical characterization. J Am Oil Chem Soc 82:365–371

    Article  CAS  Google Scholar 

  81. Lligadas G, Ronda J, Galia M, Biermann U, Metzger J (2006) Synthesis and characterization of polyurethanes from epoxidized methyl oleate based polyether polyols as renewable resources. J Polym Sci Part A 44:634–645

    Article  CAS  Google Scholar 

  82. Lligadas G, Ronda J, Galia M, Biermann U, Metzger J (2006) Synthesis and characterization of polyurethanes from epoxidized methyl oleate based polyether polyols as renewable resources. J Polym Sci A 44:634–645

    Article  CAS  Google Scholar 

  83. Zhang C, Ding R, Kessler MR (2014) Reduction of epoxidized vegetable oils: a novel method to prepare bio-based polyols for polyurethanes. Macromol Rapid Commun 35:1068–1074

    Article  CAS  PubMed  Google Scholar 

  84. Li Y, Luo X, Hu S (2015) Bio-based polyols and polyurethanes. Springer, New York

    Book  Google Scholar 

  85. Guo A, Demydov D, Zhang W, Petrovic ZS (2002) Polyols and polyurethanes from hydroformylation of soybean oil. J Polym Environ 10:49–52

    Article  CAS  Google Scholar 

  86. Petrović ZS (2008) Polyurethanes from vegetable oils. Polym Rev 48:109–155

    Article  CAS  Google Scholar 

  87. Alagi P, Hong SC (2015) Vegetable oil-based polyols for sustainable polyurethanes. Macromol Res 23:1079–1086

    Article  CAS  Google Scholar 

  88. Narine SS, Yue J, Kong X (2007) Production of polyols from canola oil and their chemical identification and physical properties. J Am Oil Chem Soc 84:173–179

    Article  CAS  Google Scholar 

  89. Kong X, Yue J, Narine SS (2007) Physical properties of canola oil based polyurethane networks. Biomacromol 8:3584–3589. https://doi.org/10.1021/bm0704018

    Article  CAS  Google Scholar 

  90. Petrovic ZS, Zhang W, Javni I (2005) Structure and properties of polyurethanes prepared from triglyceride polyols by ozonolysis. Biomacromol 6:713–719

    Article  CAS  Google Scholar 

  91. Tran P, Graiver D, Narayan R (2005) Ozone-mediated polyol synthesis from soybean oil. J Am Oil Chem Soc 82:653–659

    Article  CAS  Google Scholar 

  92. Desroches M, Caillol S, Lapinte V, Auvergne R, Boutevin B (2011) Synthesis of biobased polyols by thiol- ene coupling from vegetable oils. Macromolecules 44:2489–2500

    Article  CAS  Google Scholar 

  93. Caillol S, Desroches M, Carlotti S, Auvergne R, Boutevin B (2013) Synthesis of new polyurethanes from vegetable oil by thiol-ene coupling. Green Mater 1:16–26

    Article  CAS  Google Scholar 

  94. Paz RJG (2010) A green approach toward oleic and undecylenic acids-derived polyurethanes. Polyurethanes based on fatty acids with improved biocompatibility. J Polym Chem 49(11):2407–2416

    Google Scholar 

  95. Lluch C, Ronda JC, Galià M, Lligadas G, Cádiz V (2010) Rapid approach to biobased telechelics through two one-pot thiol: ene click reactions. Biomacromol 11:1646–1653

    Article  CAS  Google Scholar 

  96. Alagi P, Choi YJ, Hong SC (2016) Preparation of vegetable oil-based polyols with controlled hydroxyl functionalities for thermoplastic polyurethane. Eur Polym J 78:46–60

    Article  CAS  Google Scholar 

  97. Alagi P, Choi YJ, Seog J, Hong SC (2016) Efficient and quantitative chemical transformation of vegetable oils to polyols through a thiol-ene reaction for thermoplastic polyurethanes. Ind Crops Prod 87:78–88

    Article  CAS  Google Scholar 

  98. Alagi P, Ghorpade R, Jang JH, Patil C, Jirimali H, Gite V, Hong SC (2018) Functional soybean oil-based polyols as sustainable feedstocks for polyurethane coatings. Ind Crops Prod 113:249–258

    Article  CAS  Google Scholar 

  99. Chen G, Guan X, Xu R, Tian J, He M, Shen W, Yang J (2016) Synthesis and characterization of UV-curable castor oil-based polyfunctional polyurethane acrylate via photo-click chemistry and isocyanate polyurethane reaction. Prog Org Coat 93:11–16

    Article  CAS  Google Scholar 

  100. Yakushin V, Stirna U, Bikovens O, Misane M, Sevastyanova I, Vilsone D (2013) Synthesis and characterization of novel polyurethanes based on tall oil. Mater Sci 19:390–396. https://doi.org/10.5755/j01.ms.19.4.2666

    Article  Google Scholar 

  101. Pawar MS, Kadam AS, Yemul OS (2015) Development of polyetheramide based corrosion protective polyurethane coating from mahua oil. Prog Org Coat 89:143–149

    Article  CAS  Google Scholar 

  102. Fridrihsone A, Stirna U, Lazdiņa B, Misāne M, Vilsone D (2013) Characterization of polyurethane networks structure and properties based on rapeseed oil derived polyol. Eur Polym J 49:1204–1214

    Article  CAS  Google Scholar 

  103. Stirna U, Fridrihsone A, Lazdiņa B, Misāne M, Vilsone D (2013) Biobased polyurethanes from rapeseed oil polyols: structure, mechanical and thermal properties. J Polym Environ 21:952–962

    Article  CAS  Google Scholar 

  104. Patil CK, Rajput SD, Marathe RJ, Kulkarni RD, Phadnis H, Sohn D, Mahulikar PP, Gite VV (2017) Synthesis of bio-based polyurethane coatings from vegetable oil and dicarboxylic acids. Prog Org Coat 106:87–95

    Article  CAS  Google Scholar 

  105. Malik M, Kaur R (2016) Mechanical and thermal properties of castor oil–based polyurethane adhesive: effect of TiO2 filler. Adv Polym Technol 37(1):24–30. https://doi.org/10.1002/adv.21637

    Article  CAS  Google Scholar 

  106. Dutta S, Karak N (2006) Effect of the NCO/OH ratio on the properties of Mesua Ferrea L. seed oil-modified polyurethane resins. Polym Int 55:49–56

    Article  CAS  Google Scholar 

  107. Dutta N, Karak N, Dolui S (2004) Synthesis and characterization of polyester resins based on Nahar seed oil. Prog Org Coat 49:146–152

    Article  CAS  Google Scholar 

  108. Das B, Konwar U, Mandal M, Karak N (2013) Sunflower oil based biodegradable hyperbranched polyurethane as a thin film material. Ind Crop Prod 44:396–404. https://doi.org/10.1016/j.indcrop.2012.11.028

    Article  CAS  Google Scholar 

  109. Valero MF, Gonzalez A (2012) Polyurethane adhesive system from castor oil modified by a transesterification reaction. J Elastom Plast 44:433–442. https://doi.org/10.1177/0095244312437155

    Article  CAS  Google Scholar 

  110. Saravari O, Praditvatanakit S (2013) Preparation and properties of urethane alkyd based on a castor oil/jatropha oil mixture. Prog Org Coat 76:698–704

    Article  CAS  Google Scholar 

  111. Badri KH, Ujar AH, Othman Z, Hani Sahaldin F (2006) Shear strength of wood to wood adhesive based on palm kernel oil. J Appl Polym Sci 100:1759–1764

    Article  CAS  Google Scholar 

  112. Somani KP, Kansara SS, Patel NK, Rakshit AK (2003) Castor oil based polyurethane adhesives for wood-to-wood bonding. Int J Adhes Adhes 23:269–275. https://doi.org/10.1016/S0143-7496(03)00044-7

    Article  CAS  Google Scholar 

  113. Moghadam PN, Yarmohamadi M, Hasanzadeh R, Nuri S (2016) Preparation of polyurethane wood adhesives by polyols formulated with polyester polyols based on castor oil. Int J Adhes Adhes 68:273–282. https://doi.org/10.1016/j.ijadhadh.2016.04.004

    Article  CAS  Google Scholar 

  114. Mahapatra SS, Karak N (2004) Synthesis and characterization of polyesteramide resins from Nahar seed oil for surface coating applications. Prog Org Coat 51:103–108

    Article  CAS  Google Scholar 

  115. Dutta S, Karak N (2005) Synthesis, characterization of poly (urethane amide) resins from Nahar seed oil for surface coating applications. Prog Org Coat 53:147–152

    Article  CAS  Google Scholar 

  116. Feng Y, Man L, Hu Y, Chen L, Xie B, Zhang C, Yuan T, Yang Z (2019) One-pot synthesis of polyurethane-imides with tailored performance from castor and tung oil. Prog Org Coat 132:62–69

    Article  CAS  Google Scholar 

  117. Xu Y, Petrovic Z, Das S, Wilkes GL (2008) Morphology and properties of thermoplastic polyurethanes with dangling chains in ricinoleate-based soft segments. Polymer 49:4248–4258. https://doi.org/10.1016/j.polymer.2008.07.027

    Article  CAS  Google Scholar 

  118. Liu X, Xu K, Liu H, Cai H, Su J, Fu Z, Guo Y, Chen M (2011) Preparation and properties of waterborne polyurethanes with natural dimer fatty acids based polyester polyol as soft segment. Prog Org Coat 72:612–620

    Article  CAS  Google Scholar 

  119. Fonseca LR, Bergman JA, Kessler MR, Madbouly SA, Lima-Neto BS (2016) Macromol Symp 368:30

    Article  CAS  Google Scholar 

  120. Zlatanic A, Petrovic ZS, Dušek K (2002) Structure and properties of triolein-based polyurethane networks. Biomacromol 3:1048–1056

    Article  CAS  Google Scholar 

  121. Worldometers. http://www.worldometers.info/world-population/europe-population/. Accessed 17 Nov 2019

  122. Kupeta A, Naidoo E, Ofomaja A (2018) Kinetics and equilibrium study of 2-nitrophenol adsorption onto polyurethane cross-linked pine cone biomass. J Clean Prod 179:191–209

    Article  CAS  Google Scholar 

  123. Suresh KI (2012) Rigid polyurethane foams from cardanol: synthesis, structural characterization, and evaluation of polyol and foam properties. ACS Sustain Chem Eng 1:232–242

    Article  CAS  Google Scholar 

  124. Balgude D, Sabnis A, Ghosh SK (2016) Synthesis and characterization of cardanol based aqueous 2 K polyurethane coatings. Eur Polym J 85:620–634

    Article  CAS  Google Scholar 

  125. Cakić SM, Ristić IS, Milena M, Nikolić NČ, Ilić OZ, Stojiljković DT, B-Simendić JK (2012) Glycolyzed products from PET waste and their application in synthesis of polyurethane dispersions. Prog Org Coat 74:115–124

    Article  CAS  Google Scholar 

  126. Cakić SM, Ristić IS, Milena M, Stojiljković DT, Jaroslava B (2016) Preparation and characterization of waterborne polyurethane/silica hybrid dispersions from castor oil polyols obtained by glycolysis poly (ethylene terephthalate) waste. Int J Adhes Adhes 70:329–341

    Article  CAS  Google Scholar 

  127. Cakić SM, Ristić IS, Stojiljković DT, Nikolić NN, Todorović BŽ, Radosavljević-Stevanović NV (2018) Effect of the silica nanofiller on the properties of castor oil-based waterborne polyurethane hybrid dispersions based on recycled PET waste. Polym Bull 76(3):1217–1238

    Article  CAS  Google Scholar 

  128. Cakić SM, Valcic MD, Ristić IS, Radusin T, Cvetinov MJ, Budinski-Simendić J (2019) Waterborne polyurethane-silica nanocomposite adhesives based on castor oil-recycled polyols: effects of (3-aminopropyl) triethoxysilane (APTES) content on properties. Int J Adhes Adhes 90:22–31

    Article  CAS  Google Scholar 

  129. Scremin DM, Miyazaki DY, Lunelli CE, Silva SA, Zawadzki SF (2019) Macromol Symp 383:1800027

    Article  CAS  Google Scholar 

  130. Cakić SM, Ristić IS, Cincović MM, Nikolić NČ, Nikolić LB, Cvetinov MJ (2017) Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly (caprolactone) diol. Prog Org Coat 105:111–122. https://doi.org/10.1016/j.porgcoat.2016.10.038

    Article  CAS  Google Scholar 

  131. Zhou X, Fang C, Yu Q, Yang R, Xie L, Cheng Y, Li Y (2017) Synthesis and characterization of waterborne polyurethane dispersion from glycolyzed products of waste polyethylene terephthalate used as soft and hard segment. Int J Adhes Adhes 74:49–56. https://doi.org/10.1016/j.ijadhadh.2016.12.010

    Article  CAS  Google Scholar 

  132. Cui S, Liu Z, Li Y (2017) Bio-polyols synthesized from crude glycerol and applications on polyurethane wood adhesives. Ind Crops Prod 108:798–805

    Article  CAS  Google Scholar 

  133. Cui S, Luo X, Li Y (2017) Synthesis and properties of polyurethane wood adhesives derived from crude glycerol-based polyols. Int J Adhes Adhes 79:67–72. https://doi.org/10.1016/j.ijadhadh.2017.04.008

    Article  CAS  Google Scholar 

  134. Orgilés-Calpena E, Arán-Aís F, Torró-Palau AM, Montiel-Parreño E, Orgilés-Barceló C (2016) Synthesis of polyurethanes from CO2-based polyols: a challenge for sustainable adhesives. Int J Adhes Adhes 67:63–68

    Article  CAS  Google Scholar 

  135. Liu S, Wang X (2017) Polymers from carbon dioxide: polycarbonates, polyurethanes. Curr Opin Green Sustain Chem 3:61–66

    Article  Google Scholar 

  136. Orgilés-Calpena E, Arán-Aís F, Torró-Palau AM, Orgilés-Barceló C (2016) Novel polyurethane reactive hot melt adhesives based on polycarbonate polyols derived from CO2 for the footwear industry. Int J Adhes Adhes 70:218–224

    Article  CAS  Google Scholar 

  137. Yin Y, Wu Q, Liu Q, Du L (2019) Mussel-inspired fabrication of pH-sensitive biomimetic hydrogels based on greenhouse gas carbon dioxide. N J Chem 43:4757–4764

    Article  CAS  Google Scholar 

  138. Krol P (2007) Synthesis methods, chemical structures and phase structures of linear polyurethanes Properties and applications of linear polyurethanes in polyurethane elastomers, copolymers and ionomers. Prog Mater Sci 52:915–1015

    Article  CAS  Google Scholar 

  139. Eckert H, Forster B (1987) Triphosgene, a crystalline phosgene substitute. Angew Chem Int Ed 26:894–895

    Article  Google Scholar 

  140. Waldman TE, McGhee WD (1994) Isocyanates from primary amines and carbon dioxide:‘dehydration’of carbamate anions. J Chem Soc, Chem Commun 8:957–958

    Article  Google Scholar 

  141. Hojabri L, Kong X, Narine SS (2009) Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization. Biomacromol 10:884–891

    Article  CAS  Google Scholar 

  142. Çaylı G, Küsefoğlu S (2008) Biobased polyisocyanates from plant oil triglycerides: synthesis, polymerization, and characterization. J Appl Polym Sci 109:2948–2955

    Article  CAS  Google Scholar 

  143. Boulaouche T, Kherroub DE, Khimeche K, Belbachir M (2019) Green strategy for the synthesis of polyurethane by a heterogeneous catalyst based on activated clay. Res Chem Intermed 453:585–3600

    Google Scholar 

  144. Maciel VG, Bockorny G, Domingues N, Scherer MB, Zortea RB, Seferin M (2017) Comparative life cycle assessment among three polyurethane adhesive technologies for the footwear industry. ACS Sustain Chem Eng 5:8464–8472

    Article  CAS  Google Scholar 

  145. Gurunathan T, Chung JS (2016) Physicochemical oroperties of amino–silane-terminated vegetable oil-based waterborne polyurethane nanocomposites. ACS Sustain Chem Eng 4:4645–4653. https://doi.org/10.1021/acssuschemeng.6b00768

    Article  CAS  Google Scholar 

  146. Saetung A, Rungvichaniwat A, Tsupphayakorn-ake P, Bannob P, Tulyapituk T, Saetung N (2016) Properties of waterborne polyurethane films: effects of blend formulation with hydroxyl telechelic natural rubber and modified rubber seed oils. J Polym Res 23:264

    Article  CAS  Google Scholar 

  147. Honarkar H (2017) Waterborne polyurethanes: a review. J Dispers Sci Technol 39(4):507–516

    Article  CAS  Google Scholar 

  148. Gogoi S, Karak N (2014) Biobased biodegradable waterborne hyperbranched polyurethane as an ecofriendly sustainable material. ACS Sustain Chem Eng 2:2730–2738. https://doi.org/10.1021/sc5006022

    Article  CAS  Google Scholar 

  149. Liu K, Miao S, Su Z, Sun L, Ma G, Zhang S (2016) Castor oil-based waterborne polyurethanes with tunable properties and excellent biocompatibility. Eur J Lipid Sci Technol 118:1512–1520. https://doi.org/10.1002/ejlt.201500595

    Article  CAS  Google Scholar 

  150. Ayres E, Oréfice RL, Yoshida MI (2007) Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions. Eur Polym J 43:3510–3521. https://doi.org/10.1016/j.eurpolymj.2007.05.014

    Article  CAS  Google Scholar 

  151. Lei L, Xia Z, Lin X, Yang T, Zhong L (2015) Synthesis and adhesion properties of waterborne polyurethane dispersions with long-branched aliphatic chains. J Appl Polym Sci 132:41688

    Article  CAS  Google Scholar 

  152. Ma G, Shen Y, Gao R, Wang X (2017) Micromorphology and adhesive properties of sulfonated polyurethane/polyacrylate emulsions prepared by surfactant-free polymerization. J Polym Res 24:36–47. https://doi.org/10.1007/s10965-017-1200-0

    Article  CAS  Google Scholar 

  153. Tsen W, Lee C, Su Y, Gu J, Suen M (2019) Effect of novel aliphatic fluoro-diol content on synthesis and properties of waterborne polyurethanes. J Appl Polym Sci 136:47356

    Article  CAS  Google Scholar 

  154. Du H, Zhao Y, Li Q, Wang J, Kang M, Wang X, Xiang H (2008) Synthesis and characterization of waterborne polyurethane adhesive from MDI and HDI. J Appl Polym Sci 110:1396–1402

    Article  CAS  Google Scholar 

  155. Santamaria-Echart A, Ugarte L, García-Astrain C, Arbelaiz A, Corcuera MA, Eceiza A (2016) Cellulose nanocrystals reinforced environmentally-friendly waterborne polyurethane nanocomposites. Carbohydr Polym 151:1203–1209. https://doi.org/10.1016/j.carbpol.2016.06.069

    Article  CAS  PubMed  Google Scholar 

  156. Feng J, Lu Q, Tan W, Chen K, Ouyang P (2019) The influence of the NCO/OH ratio and the 1, 6-hexanediol/dimethylol propionic acid molar ratio on the properties of waterborne polyurethane dispersions based on 1, 5-pentamethylene diisocyanate. Front Chem Sci Eng 13:80–89

    Article  CAS  Google Scholar 

  157. Mohamed H, Morsi S, Badran B, Rabie A (2017) Eco-friendly protective coatings based on poly (urethane sulfone amide) dispersions for carbon steel. J Coat Technol Res 14:437–446

    Article  CAS  Google Scholar 

  158. Fuensanta M, Jofre-Reche JA, Rodríguez-Llansola F, Costa V, Iglesias JI, Martín-Martínez JM (2017) Structural characterization of polyurethane ureas and waterborne polyurethane urea dispersions made with mixtures of polyester polyol and polycarbonate diol. Prog Org Coat 112:141–152. https://doi.org/10.1016/j.porgcoat.2017.07.009

    Article  CAS  Google Scholar 

  159. Kim EJ, Paik IK, Park JH (2019) AIP Conf Proc 2083:030005

    Article  CAS  Google Scholar 

  160. Pérez-Limiñana MÁ, Arán-Aís F, Torró-Palau AM, Orgilés-Barceló C, Martín-Martínez JM (2006) Structure and properties of waterborne polyurethane adhesives obtained by different methods. J Adhes Sci Technol 20:519–536

    Article  Google Scholar 

  161. Cakić SM, Špírková M, Ristić IS, B-Simendić JK, Milena M, Poręba R (2013) The waterborne polyurethane dispersions based on polycarbonate diol: effect of ionic content. Mater Chem Phys 138:277–285. https://doi.org/10.1016/j.matchemphys.2012.11.057

    Article  CAS  Google Scholar 

  162. Orgilés-Calpena E, Arán-Aís F, Torró-Palau AM, Orgilés-Barceló C (2012) Influence of the chain extender nature on adhesives properties of polyurethane dispersions. J Dispers Sci Technol 33:147–154

    Article  CAS  Google Scholar 

  163. Lei L, Zhang Y, Ou C, Xia Z, Zhong L (2016) Synthesis and characterization of waterborne polyurethanes with alkoxy silane groups in the side chains for potential application in waterborne ink. Prog Org Coat 92:85–94

    Article  CAS  Google Scholar 

  164. Chien Y, Chuang W, Jeng U, Hsu S (2017) Preparation, characterization, and mechanism for biodegradable and biocompatible polyurethane shape memory elastomers. ACS Appl Mater Interfaces 9:5419–5429

    Article  CAS  PubMed  Google Scholar 

  165. Liu K, Su Z, Miao S, Ma G, Zhang S (2016) UV-curable enzymatic antibacterial waterborne polyurethane coating. Biochem Eng J 113:107–113

    Article  CAS  Google Scholar 

  166. Yong Q, Nian F, Liao B, Huang L, Wang L, Pang H (2015) Synthesis and characterization of solvent-free waterborne polyurethane dispersion with both sulfonic and carboxylic hydrophilic chain-extending agents for matt coating applications. RSC Adv 5:107413–107420

    Article  CAS  Google Scholar 

  167. Fu H, Wang Y, Li X, Chen W (2016) Synthesis of vegetable oil-based waterborne polyurethane/silver-halloysite antibacterial nanocomposites. Compos Sci Technol 126:86–93

    Article  CAS  Google Scholar 

  168. Chen R, Huang C, Hsu S (2019) Composites of waterborne polyurethane and cellulose nanofibers for 3D printing and bioapplications. Carbohydr Polym 21:275–288

    Google Scholar 

  169. Heck CA, dos Santos João, Henrique Z, Wolf CR (2015) Waterborne polyurethane: the effect of the addition or in situ formation of silica on mechanical properties and adhesion. Int J Adhes Adhes 58:13–20

    Article  CAS  Google Scholar 

  170. Kale MB, Luo Z, Zhang X, Dhamodharan D, Divakaran N, Mubarak S, Wu L, Xu Y (2019) Waterborne polyurethane/graphene oxide-silica nanocomposites with improved mechanical and thermal properties for leather coatings using screen printing. Polymer 170:43–53

    Article  CAS  Google Scholar 

  171. Li X, Li W, Wang X, Guo H, Wang R, Guo X, Li C, Jia X (2018) Enhanced adhesion force based on microphase separation induced by complexation of ferric ions and polyurethane matrix. J Appl Polym Sci 135:46069

    Article  CAS  Google Scholar 

  172. Orgiles-Calpena E, Aran-Ais F, Torró-Palau AM, Orgilés-Barceló C, Martín-Martínez JM (2009) Addition of different amounts of a urethane-based thickener to waterborne polyurethane adhesive. Int J Adhes Adhes 29:309–318

    Article  CAS  Google Scholar 

  173. Che J, Cheon J, Chun J, Park C, Lee Y, Kim H (2017) Preparation and properties of emulsifier-/solvent-free slightly crosslinked waterborne polyurethane-acrylic hybrid emulsions for footwear adhesives (III)–effect of trimethylol propane (TMP)/ethylene diamine (EDA) content. J Adhes Sci Technol 31(17):1872–1887

    Article  CAS  Google Scholar 

  174. Mehravar S, Ballard N, Agirre A, Tomovska R, Asua JM (2017) Relating polymer microstructure to adhesive performance in blends of hybrid polyurethane/acrylic latexes. Eur Polym J 87:300–307

    Article  CAS  Google Scholar 

  175. Lopez A, Degrandi-Contraires E, Canetta E, Creton C, Keddie JL, Asua JM (2011) Waterborne polyurethane: acrylic hybrid nanoparticles by miniemulsion polymerization: applications in pressure-sensitive adhesives. Langmuir 27:3878–3888

    Article  CAS  PubMed  Google Scholar 

  176. Alvarez GA, Fuensanta M, Orozco VH, Giraldo LF, Martín-Martínez JM (2018) Hybrid waterborne polyurethane/acrylate dispersion synthesized with bisphenol A-glicidylmethacrylate (Bis-GMA) grafting agent. Prog Org Coat 118:30–39. https://doi.org/10.1016/j.porgcoat.2018.01.016

    Article  CAS  Google Scholar 

  177. Yildiz Z, Onen HA (2017) Dual-curable PVB based adhesive formulations for cord/rubber composites: the influence of reactive diluents. Int J Adhes Adhes 78:38–44

    Article  CAS  Google Scholar 

  178. Chattopadhyay D, Raju K (2007) Structural engineering of polyurethane coatings for high performance applications. Prog Polym Sci 32:352–418. https://doi.org/10.1016/j.progpolymsci.2006.05.003

    Article  CAS  Google Scholar 

  179. Abdalla S, Al-Aama N, Al-Ghamdi MA (2016) A bio polymeric adhesive produced by photo cross-linkable technique. Polymers 8:292. https://doi.org/10.3390/polym8080292

    Article  CAS  PubMed Central  Google Scholar 

  180. Li C, Wang T, Hu L, Wei Y, Liu J, Mu X, Nie J, Yang D (2014) Photocrosslinkable bioadhesive based on dextran and PEG derivatives. Mater Sci Eng, C 35:300–306

    Article  CAS  Google Scholar 

  181. Wang T, Mu X, Li H, Wu W, Nie J, Yang D (2013) The photocrosslinkable tissue adhesive based on copolymeric dextran/HEMA. Carbohydr Polym 92:1423–1431

    Article  CAS  PubMed  Google Scholar 

  182. Jiao Z, Yang Q, Wang X, Wang C (2016) UV-curable hyperbranched urethane acrylate oligomers modified with different fatty acids. Polym Bull 74(12):5049–5063

    Article  CAS  Google Scholar 

  183. Patel MM, Patel KI, Patel HB, Parmar JS (2009) UV-curable polyurethane coatings derived from cellulose. Iran Polym J 18(11):903–915

    CAS  Google Scholar 

  184. Wei D, Liao B, Yong Q, Wang H, Li T, Huang J, Pang H (2019) Castor oil-based waterborne hyperbranched polyurethane acrylate emulsion for UV-curable coatings with excellent chemical resistance and high hardness. J Coat Technol Res 16:415–428

    Article  CAS  Google Scholar 

  185. Bakhshandeh E, Bastani S, Saeb MR, Croutxé-Barghorn C, Allonas X (2019) High-performance water-based UV-curable soft systems with variable chain architecture for advanced coating applications. Progr Org Coat 130:99–113

    Article  CAS  Google Scholar 

  186. Hu Y, Feng G, Shang Q, Bo C, Jia P, Liu C, Xu F, Zhou Y (2018) Bio-based reactive diluent derived from cardanol and its application in polyurethane acrylate (PUA) coatings with high performance. J Coat Technol Res 16(2):499–509. https://doi.org/10.1007/s11998-018-0128-6

    Article  CAS  Google Scholar 

  187. Hu Y, Shang Q, Tang J, Wang C, Zhang F, Jia P, Feng G, Wu Q, Liu C, Hu L (2018) Use of cardanol-based acrylate as reactive diluent in UV-curable castor oil-based polyurethane acrylate resins. Ind Crops Prod 117:295–302

    Article  CAS  Google Scholar 

  188. Wang T, Nie J, Yang D (2012) Dextran and gelatin based photocrosslinkable tissue adhesive. Carbohydr Polym 90:1428–1436

    Article  CAS  PubMed  Google Scholar 

  189. Liu B, Nie J, He Y (2016) From rosin to high adhesive polyurethane acrylate: synthesis and properties. Int J Adhes Adhes 66:99–103

    Article  CAS  Google Scholar 

  190. EU Publications. https://publications.europa.eu/en/publication-detail/-/publication/dfe232f5-9002-4375-b4d4-00a85251525b/language-en/format-RDF. Accessed 17 Nov 2019

  191. Cornille A, Auvergne R, Figovsky O, Boutevin B, Caillol S (2017) A perspective approach to sustainable routes for non-isocyanate polyurethanes. Eur Polym J 87:535–552

    Article  CAS  Google Scholar 

  192. Groszos SJ, Drechsel EK (1957) Method of preparing a polyurethane

  193. Tomita H, Sanda F, Endo T (2001) Model reaction for the synthesis of polyhydroxyurethanes from cyclic carbonates with amines: substituent effect on the reactivity and selectivity of ring-opening direction in the reaction of five-membered cyclic carbonates with amine. J Polym Sci Part A 39:3678–3685

    Article  CAS  Google Scholar 

  194. Zabalov M, Tiger R, Berlin A (2012) Mechanism of urethane formation from cyclocarbonates and amines: a quantum chemical study. Russ Chem Bull 61:518–527

    Article  CAS  Google Scholar 

  195. Webster DC, Crain AL (2000) Synthesis and applications of cyclic carbonate functional polymers in thermosetting coatings. Prog Org Coat 40:275–282

    Article  CAS  Google Scholar 

  196. Tryznowski M, Świderska A, Żołek-Tryznowska Z, Gołofit T, Parzuchowski PG (2015) Facile route to multigram synthesis of environmentally friendly non-isocyanate polyurethanes. Polymer 80:228–236

    Article  CAS  Google Scholar 

  197. Lamarzelle O, Durand P, Wirotius A, Chollet G, Grau E, Cramail H (2016) Activated lipidic cyclic carbonates for non-isocyanate polyurethane synthesis. Polym Chem 7:1439–1451

    Article  CAS  Google Scholar 

  198. Carothers WH, Hill JW (1933) Studies of polymerization and ring formation XXII. Stereochemistry and mechanism in the formation and stability of large rings. J Am Chem Soc 55:5043–5052

    Article  CAS  Google Scholar 

  199. Błażek K, Datta J (2019) Renewable natural resources as green alternative substrates to obtain bio-based non-isocyanate polyurethanes-review. Crit Rev Environ Sci Technol 49(3):173–211

    Article  CAS  Google Scholar 

  200. Kim M, Kim H, Ha C, Park D, Lee J (2001) Syntheses and thermal properties of poly (hydroxy) urethanes by polyaddition reaction of bis (cyclic carbonate) and diamines. J Appl Polym Sci 81:2735–2743

    Article  CAS  Google Scholar 

  201. Cornille A, Guillet C, Benyahya S, Negrell C, Boutevin B, Caillol S (2016) Room temperature flexible isocyanate-free polyurethane foams. Eur Polym J 84:873–888

    Article  CAS  Google Scholar 

  202. Cornille A, Michaud G, Simon F, Fouquay S, Auvergne R, Boutevin B, Caillol S (2016) Promising mechanical and adhesive properties of isocyanate-free poly (hydroxyurethane). Eur Polym J 84:404–420. https://doi.org/10.1016/j.eurpolymj.2016.09.048

    Article  CAS  Google Scholar 

  203. Arvin ZY, Setien RA, Sahouani JM, Docken J, Webster DC (2019) Catalyzed non-isocyanate polyurethane (NIPU) coatings from bio-based poly (cyclic carbonates). J Coat Technol Res 16:41–57

    Article  CAS  Google Scholar 

  204. Wang C, Wu Z, Tang L, Qu J (2019) Synthesis and properties of cyclic carbonates and non-isocyanate polyurethanes under atmospheric pressure. Prog Org Coat 127:359–365

    Article  CAS  Google Scholar 

  205. He X, Wu G, Xu L, Yan J, Yan Y (2018) Lipase-catalyzed synthesis, properties characterization, and application of bio-based dimer acid cyclocarbonate. Polymers 10:262

    Article  CAS  PubMed Central  Google Scholar 

  206. Ma Z, Li C, Fan H, Wan J, Luo Y, Li B (2017) Polyhydroxyurethanes (PHUs) derived from diphenolic acid and carbon dioxide and their application in solvent-and water-borne PHU coatings. Ind Eng Chem Res 56:14089–14100

    Article  CAS  Google Scholar 

  207. Thébault M, Pizzi A, Santiago-Medina F, Al-Marzouki F, Abdalla S (2017) Isocyanate-free polyurethanes by coreaction of condensed tannins with aminated tannins. J Renew Mater 5:21–29

    Article  Google Scholar 

  208. Tryznowski M, Izdebska-Podsiadły J, Żołek-Tryznowska Z (2017) Wettability and surface free energy of NIPU coatings based on bis (2, 3-dihydroxypropyl) ether dicarbonate. Prog Org Coat 109:55–60

    Article  CAS  Google Scholar 

  209. Leitsch EK, Heath WH, Torkelson JM (2016) Polyurethane/polyhydroxyurethane hybrid polymers and their applications as adhesive bonding agents. Int J Adhes Adhes 64:1–8

    Article  CAS  Google Scholar 

  210. Cornille A, Serres J, Michaud G, Simon F, Fouquay S, Boutevin B, Caillol S (2016) Syntheses of epoxyurethane polymers from isocyanate free oligo-polyhydroxyurethane. Eur Polym J 75:175–189

    Article  CAS  Google Scholar 

  211. He X, Xu X, Wan Q, Bo G, Yan Y (2017) Synthesis and characterization of dimmer-acid-based nonisocyanate polyurethane and epoxy resin composite. Polymers 9:649

    Article  CAS  PubMed Central  Google Scholar 

  212. Liu G, Wu G, Chen J, Kong Z (2016) Synthesis, modification and properties of rosin-based non-isocyanate polyurethanes coatings. Prog Org Coat 101:461–467

    Article  CAS  Google Scholar 

  213. Tryznowski M, Świderska A, Gołofit T, Żołek-Tryznowska Z (2017) Wood adhesive application of poly (hydroxyurethane) s synthesized with a dimethyl succinate-based amide backbone. RSC Adv 7:30385–30391

    Article  CAS  Google Scholar 

  214. Wang Z, Zhang X, Zhang L, Tan T, Fong H (2016) Nonisocyanate biobased poly (ester urethanes) with tunable properties synthesized via an environment-friendly route. ACS Sustain Chem Eng 4:2762–2770. https://doi.org/10.1021/acssuschemeng.6b00275

    Article  CAS  Google Scholar 

  215. Mallonee JE (1961) Stable polyurethane latex and process of making same

  216. Baldan A (2012) Adhesion phenomena in bonded joints. Int J Adhes Adhes 38:95–116. https://doi.org/10.1016/j.ijadhadh.2012.04.007

    Article  CAS  Google Scholar 

  217. Asahara J, Sano A, Hori N, Takemura A, Ono H (2003) Crosslinked acrylic pressure-sensitive adhesives.II. Effect of humidity on the crosslinking reaction. J Appl Polym Sci 89:3039–3045

    Article  CAS  Google Scholar 

  218. Clerc G, Brülisauer M, Affolter S, Volkmer T, Pichelin F, Niemz P (2017) Characterization of the ageing process of one-component polyurethane moisture curing wood adhesive. Int J Adhes Adhes 72:130–138. https://doi.org/10.1016/j.ijadhadh.2016.09.008

    Article  CAS  Google Scholar 

  219. Boutar Y, Naïmi S, Mezlini S, Ali MBS (2016) Effect of surface treatment on the shear strength of aluminium adhesive single-lap joints for automotive applications. Int J Adhes Adhes 67:38–43

    Article  CAS  Google Scholar 

  220. Kong X, Liu G, Curtis JM (2011) Characterization of canola oil based polyurethane wood adhesives. Int J Adhes Adhes 31:559–564. https://doi.org/10.1016/j.ijadhadh.2011.05.004

    Article  CAS  Google Scholar 

  221. Pizzi A (2006) Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues. J Adhes Sci Technol 20:829–846. https://doi.org/10.1163/156856106777638635

    Article  CAS  Google Scholar 

  222. Hicks CR, Carlson BE, Mallick P (2015) Rheological study of automotive adhesives: influence of storage time, temperature and shear rate on viscosity at dispensing. Int J Adhes Adhes 63:108–116

    Article  CAS  Google Scholar 

  223. Aung MM, Yaakob Z, Kamarudin S, Abdullah LC (2014) Synthesis and characterization of Jatropha (Jatropha curcas L.) oil-based polyurethane wood adhesive. Ind Crop Prod 60:177–185

    Article  CAS  Google Scholar 

  224. Malucelli G, Priola A, Ferrero F, Quaglia A, Frigione M, Carfagna C (2005) Polyurethane resin-based adhesives: curing reaction and properties of cured systems. Int J Adhes Adhes 25:87–91

    Article  CAS  Google Scholar 

  225. Daniel da Silva AL, Martín-Martínez JM, Bordado JCM (2006) Influence of the free isocyanate content in the adhesive properties of reactive trifunctional polyether urethane quasi-prepolymers. Int J Adhes Adhes 26:355–362. https://doi.org/10.1016/j.ijadhadh.2005.06.001

    Article  CAS  Google Scholar 

  226. Daniel-da-Silva AL, Bordado JCM, Martín-Martínez JM (2008) Moisture curing kinetics of isocyanate ended urethane quasi-prepolymers monitored by IR spectroscopy and DSC. J Appl Polym Sci 107:700–709

    Article  CAS  Google Scholar 

  227. Ferreira P, Coelho J, Pereira R, Silva AF, Gil M (2007) Synthesis and characterization of a poly (ethylene glycol) prepolymer to be applied as a bioadhesive. J Appl Polym Sci 105:593–601

    Article  CAS  Google Scholar 

  228. Yuan Y, Zhang Y, Fu X, Kong W, Liu Z, Hu K, Jiang L, Lei J (2017) Molecular design for silane-terminated polyurethane applied to moisture-curable pressure-sensitive adhesive. J Appl Polym Sci 134(37):45292

    Article  CAS  Google Scholar 

  229. Yuan L, Qiang P, Gao J, Shi Y (2017) Synthesis of oxazolidines as latent curing agents for single-component polyurethane adhesive and its properties study. J Appl Polym Sci 135(4):45722

    Article  CAS  Google Scholar 

  230. Sahoo S, Kalita H, Mohanty S, Nayak SK (2017) Synthesis and characterization of vegetable oil based polyurethane derived from low viscous bio aliphatic isocyanate: adhesion strength to wood-wood substrate bonding. Macromol Res 25:1–7. https://doi.org/10.1007/s13233-017-5080-2

    Article  CAS  Google Scholar 

  231. Desai SD, Patel JV, Sinha VK (2003) Polyurethane adhesive system from biomaterial-based polyol for bonding wood. Int J Adhes Adhes 23:393–399

    Article  CAS  Google Scholar 

  232. Silva BB, Santana RM, Forte MM (2010) A solventless castor oil-based PU adhesive for wood and foam substrates. Int J Adhes Adhes 30:559–565. https://doi.org/10.1016/j.ijadhadh.2010.07.001

    Article  CAS  Google Scholar 

  233. Norazwani MZ, Ahmad SH, Ali ES (2013) Green polyurethane adhesive bonding of aluminum: effect of surface treatments. Appl Mech Mater 55:43–55

    Google Scholar 

  234. Bastani A, Adamopoulos S, Militz H (2017) Effect of open assembly time and equilibrium moisture content on the penetration of polyurethane adhesive into thermally modified wood. J Adhes 93:575–583

    Article  CAS  Google Scholar 

  235. Lavalette A, Cointe A, Pommier R, Danis M, Delisée C, Legrand G (2016) Experimental design to determine the manufacturing parameters of a green-glued plywood panel. Eur J Wood Wood Prod 74(4):543–551

    Article  CAS  Google Scholar 

  236. Chattopadhyay D, Prasad P, Sreedhar B, Raju K (2005) The phase mixing of moisture cured polyurethane-urea during cure. Prog Org Coat 54:296–304

    Article  CAS  Google Scholar 

  237. Huacuja-Sánchez J, Müller K, Possart W (2016) Water diffusion in a crosslinked polyether-based polyurethane adhesive. Int J Adhes Adhes 66:167–175. https://doi.org/10.1016/j.ijadhadh.2016.01.005

    Article  CAS  Google Scholar 

  238. Arán-Aís F, Torró-Palau AM, Orgilés-Barceló AC, Martín-Martínez JM (2002) Characterization of thermoplastic polyurethane adhesives with different hard/soft segment ratios containing rosin as an internal tackifier. J Adhes Sci Technol 16:1431–1448. https://doi.org/10.1163/156856102320252886

    Article  Google Scholar 

  239. Deka H, Karak N (2011) Bio-based hyperbranched polyurethane/clay nanocomposites: adhesive, mechanical, and thermal properties. Polym Adv Technol 22:973–980

    Article  CAS  Google Scholar 

  240. Tenorio-Alfonso A, Sánchez MC, Franco JM (2017) Preparation, characterization and mechanical properties of bio-based polyurethane adhesives from isocyanate-functionalized cellulose acetate and castor oil for bonding wood. Polymers 9:132–145. https://doi.org/10.3390/polym9040132

    Article  CAS  PubMed Central  Google Scholar 

  241. Tenorio-Alfonso A, Sánchez MC, Franco JM (2019) Synthesis and mechanical properties of bio-sourced polyurethane adhesives obtained from castor oil and MDI-modified cellulose acetate: influence of cellulose acetate modification. Int J Adhes Adhes 95:102404

    Article  CAS  Google Scholar 

  242. Tenorio-Alfonso A, Pizarro M, Sánchez M, Franco J (2018) Assessing the rheological properties and adhesion performance on different substrates of a novel green polyurethane based on castor oil and cellulose acetate: a comparison with commercial adhesives. Int J Adhes Adhes 82:21–26. https://doi.org/10.1016/j.ijadhadh.2017.12.012

    Article  CAS  Google Scholar 

  243. Raghunanan LC, Martínez I, Valencia C, Sánchez MC, Franco JM (2018) Unexpected selectivity in the functionalization of neat castor oil under benign catalyst-free conditions. ACS Sustain Chem Eng 6:7212–7215. https://doi.org/10.1021/acssuschemeng.8b00979

    Article  CAS  Google Scholar 

  244. Ruan M, Luan H, Wang G, Shen M (2019) Bio-polyols synthesized from bio-based 1, 3-propanediol and applications on polyurethane reactive hot melt adhesives. Ind Crops Prod 128:436–444

    Article  CAS  Google Scholar 

  245. Xi X, Wu Z, Pizzi A, Gerardin C, Lei H, Zhang B, Du G (2019) Non-isocyanate polyurethane adhesive from sucrose used for particleboard. Wood Sci Technol 53(2):393–403

    Article  CAS  Google Scholar 

  246. Liu H, Li C, Sun XS (2017) Soy-oil-based waterborne polyurethane improved wet strength of soy protein adhesives on wood. Int J Adhes Adhes 73:66–74. https://doi.org/10.1016/j.ijadhadh.2016.09.006

    Article  CAS  Google Scholar 

  247. Tao C, Bao J, Cheng Q, Huang Y, Xu G (2018) Preparation of waterborne polyurethane adhesives based on macromolecular-diols containing different diisocyanate. J Adhes 95(9):814–833

    Article  CAS  Google Scholar 

  248. Sheikh N, Katbab A, Mirzadeh H (2000) Isocyanate-terminated urethane prepolymer as bioadhesive base material: synthesis and characterization. Int J Adhes Adhes 20:299–304

    Article  CAS  Google Scholar 

Download references

Funding

This work is part of two research projects (CTQ2014–56038-C3-1R and TEP-1499) sponsored by MINECO-FEDER and Junta de Andalucía programmes, respectively. One of the authors (Adrián Tenorio-Alfonso) has also received a Ph.D. Research Grant from “Ministerio de Educación” (FPU13/01114). The authors gratefully acknowledge the financial support.

Author information

Authors and Affiliations

  1. Pro2TecS-Chemical Product and Process Technology Research Centre, University of Huelva, 21071, Huelva, Spain

    Adrián Tenorio-Alfonso, Mª Carmen Sánchez & José Mª Franco

Authors
  1. Adrián Tenorio-Alfonso
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mª Carmen Sánchez
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. José Mª Franco
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Adrián Tenorio-Alfonso.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tenorio-Alfonso, A., Sánchez, M.C. & Franco, J.M. A Review of the Sustainable Approaches in the Production of Bio-based Polyurethanes and Their Applications in the Adhesive Field. J Polym Environ 28, 749–774 (2020). https://doi.org/10.1007/s10924-020-01659-1

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10924-020-01659-1

Keywords

Search

Navigation