Abstract
This paper focuses on the compressive stress reduction in a SiO2 optical window. The design and fabrication of the optical window for an optical modulator toward image sensing applications are reported. The optical window consists of micrometer-order SiO2 capillaries (porous solids) that can modulate the transmission light intensity by moving a liquid in and out of the porous solid. A high optical transmittance can be achieved due to refractive index matching when the liquid is penetrated into the porous solid. Otherwise, its light transmittance is low because of light reflection and scattering by air holes and capillary walls. Silicon capillaries fabricated by deep reactive ion etching process are completely oxidized to form the SiO2 capillaries. A large compressive stress of the oxide causes bending of the capillary structure, which is reduced by using thin supporting beams. A 7.2 mm × 9.6 mm optical window area toward a fully integrated with the image sensor is successfully fabricated, and a light modulation effect dependent on liquid penetration is clearly demonstrated in visible region (wavelength range from 450 to 650 nm).
Similar content being viewed by others
References
Andriukaitis D, Anilionis R (2007) Oxidation process and different crystallographic plane orientation dependence simulation in micro and nano structure. In: Proceedings of conference on information technology and interfaces, pp 573–578
Antoio GD, Jose LP, Manuel N, Antonio P, Santiago R, Luis O (2014) Locating moving object in car-driving sequences. J Image Video Process 24:1–23
Barrett HH, Swindell W (1996) Radiological imaging: the theory of image formation, detection and processing. Academic press, New York
Beni G, Hackwood S (1981) Electro-wetting displays. J Appl Phys Lett 38:207
Berge B, Peseux J (2000) Variable focal lens controlled by an external voltage: an application of electrowetting. Eur Phys J E 3:159–163
Chang C, Abe T, Esashi M (2004) Trench filling characteristics of low stress TEOS/ozone oxide deposited by PECVD and SACVD. J Microsyst Technol 10:97–102
Chou SY, Krauss PR, Renstrom PJ (1996) Imprint lithography with 25-nanometer resolution. Science 272:85–87
Con C, Zhang J, Cui B (2014) Nanofabrication of high aspect ratio structures using an evaporated resist containing metal. J Nanotechnol 25:17531
Han J, Wang D, Shao L, Qian X, Cheng G, Han J (2014) Image visual attention computation and application via the learning of object atributes. J Mach Vis Appl 25:1671–1683
Heikenfeld J, Zhou K, Kreit E, Raji B, Yang S, Sun B, Milarcik A, Clapp L, Schwartz R (2009) Electrofluidic displays using Young-Laplace transposition of brilliant pigment dispersions. J Nat Photon 3:292–296
Karaoguz H, Erkent O, Bozma HI (2014) RGB-D based place representation in topological maps. J Mach Vis Appl 25:1913–1927
Lee J, Moon H, Fowler J, Schoellhammer T, Kim CJ (2002) Electrowetting and electrowetting on dielectric for micrscale liquid handling. J Sens Actuator A 95:259–268
Levin A, Fergus R, Durand F, Freeman WT (2007) Image and depth from a conventional camera with a coded aperture. ACM Trans Graph 26:701–709
Levin A, Fergus R, Durand F, Freeman B (2009) Image and depth from a conventional camera with a coded aperture. In: Proceedings of SIGGRAPH
Liang F, Tang S, Zhang Y, Xu Z, Li J (2014) Pedestrian detection based on sparse coding and transfer learning. J Mach Vis Appl 25:1697–1709
Morimoto NI, Swart JW (1996) Development of a cluster tool and analysis of deposition of silicon oxide by TEOS O2 PECVD. In: MRS proceedings, p 263
Ng R, Marc L, Mathieu B, Gene D, Mark H, Pat H, Duval D (2005) Light field photography with a hand held plenoptic camera. Stanford Tech Report CTSR 2005-2
Nussbaum Ph, Volkel R, Eisner M, Haselbeck S (1997) Design, fabrication and testing of microlens arrays for sensors and microsystems. Pure Appl Opt J Eur Opt Soc Part A 6:617–636
Ohtake H, Ishihara H, Fuse T, Koshiishi A, Samukawa S (2003) Highly selective and high rate SiO2 etching using argon-added C2F4/CF3I plasma. J Vac Sci Technol B 21:2142
Suzuki Y, Totsu K, Moriyama M, Esashi M, Tanaka S (2014) Free-standing subwavelength grid infrared rejection filter of 90 mm diameter for EUV light source. In: Proceedings of the 27th IEEE international conference on micro electro mechanical systems, pp 482–485
Szekeres A, Danesh P (1996) Mechanical stress in SiO2/Si structures formed by thermal oxidation of amorphous and crystalline silicon. J Semicond Sci Technol 11:1225–1230
Toan NV, Miyashita H, Toda M, Kawai Y, Ono T (2013) Fabrication of an hermetically packaged silicon resonator on LTCC substrate. J Microsyst Technol 19:1165–1175
Toan NV, Kubota T, Sekhar H, Samukawa S, Ono T (2014a) Mechanical quality factor enhancement in a silicon micromechanical resonator by low-damage process using neutral beam etching technology. J Micromech Microeng 24:085005
Toan NV, Toda M, Kawai Y, Ono T (2014b) A capacitive silicon resonator with a movable electrode structure for gap width reduction. J Micromech Microeng 24:025006
Acknowledgments
Part of this work was performed in the Micro/Nanomachining Research Education Center (MNC) of Tohoku University. This work was supported by Special Coordination Funds for Promoting Science and Technology, Formation of Innovation Center for Fusion of Advanced Technologies.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Van Toan, N., Sangu, S., Saito, T. et al. Fabrication of a SiO2 optical window for controlling light transmission. Microsyst Technol 23, 919–927 (2017). https://doi.org/10.1007/s00542-016-2826-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-016-2826-2