Abstract
Oscillating arc narrow gap all-position gas metal arc (GMA) welding is primarily applied for the construction of large metal structure with the advantages of high efficiency and quality. According to the characteristic of weld shape, oscillating arc narrow gap all-position welding process can be divided into two parts, namely 0–180° and 180–360°, and in this paper the welding process of part 180–360° was researched. The statistical models for weld geometry were developed to predict and optimize weld bead geometry by using response surface methodology (RSM) based on central composite design (CCD), and the developed models were checked for their adequacy and significance by ANOVA. Then, the effects of wire feed rate, travel speed, dwell time, oscillating amplitude, and welding position on weld bead dimension were studied. Finally, the optimal welding parameters at welding positions from 180° to 360° were obtained by numerical optimization using RSM.
Similar content being viewed by others
References
Ostrovskii O, Kulik V, Kazakov V (1995) Narrow-gap welding large thicknesses with a deformed electrode. Weld Int 9(9):731–734
Iwata S, Murayama M, Kojima Y (2009) Application of narrow gap welding process with high speed rotating arc to box column joints of heavy thick plates. JFE Technical Report
Biswas P, Mandal N, Vasu P, Padasalag SB (2010) Analysis of welding distortion due to narrow-gap welding of upper port plug. Fusion Eng Des 85(5):780–788
Wang JY, Ren YS, Yang F, Guo HB (2007) Novel rotation arc system for narrow gap MAG welding. Sci Technol Weld Joi 12(6):505–507. doi:10.1179/174329307x213756
Probst R, Hartung F (1988) Narrow gap metal active-gas welding up to a plate thickness of 300 mm. Weld Int 2(8):749–754
Min D, Xin-hua T, Feng-gui L, Shun Y (2010) Welding of quenched and tempered steels with high-spin arc narrow gap MAG system. Int J Adv Manuf Technol 55(5–8):527–533. doi:10.1007/s00170-010-3052-1
Guo N, Lin S, Gao C, Fan C, Yang C (2009) Study on elimination of interlayer defects in horizontal joints made by rotating arc narrow gap welding. Sci Technol Weld Joi 14(6):584
Wang J, Zhu J, Fu P, Su R, Han W, Yang F (2012) A swing arc system for narrow gap GMA welding. Isij Int 52(1):110–114
Lassaline E, Zajaczkowski B, HNorth T (1989) Narrow groove twin-wire GMAW of high-strength steel. Weld J 68(9):53–58
Narang HK, Mahapatra MM, Jha PK, Mukherjee I (2012) Modelling and predicting the effects of submerged arc weldment process parameters on weldment characteristics and shape profiles. Proc Inst Mech Eng B J Eng Manuf 226(7):1230–1240
Jha M, Pratihar D, Dey V, Saha T, Bapat A (2011) Study on electron beam butt welding of austenitic stainless steel 304 plates and its input–output modelling using neural networks. Proc Inst Mech Eng B J Eng 225(11):2051–2070
Kim D, Rhee S (2004) Optimization of a gas metal arc welding process using the desirability function and the genetic algorithm. Proc Inst Mech Eng B J Eng 218(1):35–41
Murugan N, Parmar R (1994) Effects of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel. J Mater Process Technol 41(4):381–398
Kim I, Son J, Kim I, Kim J, Kim O (2003) A study on relationship between process variables and bead penetration for robotic CO < sub >2</sub > arc welding. J Mater Process Technol 136(1):139–145
Kim I, Basu A, Siores E (1996) Mathematical models for control of weld bead penetration in the GMAW process. Int J Adv Manuf Technol 12(6):393–401
Starling C, Marques PV, Modenesi PJ (1995) Statistical modelling of narrow-gap GTA welding with magnetic arc oscillation. J Mater Process Technol 51(1):37–49
Modenesi PJ (1990) Statistical modelling of the narrow gap gas metal arc welding process. PhD Thesis, Cranfield university, Cranfield
Xu W, Lin S, Fan C, Zhuo X, Yang C (2014) Statistical modelling of weld bead geometry in oscillating arc narrow gap all-position GMA welding. Int J Adv Manuf Technol 72(9–12):1705–1716
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, W.H., Lin, S.B., Fan, C.L. et al. Prediction and optimization of weld bead geometry in oscillating arc narrow gap all-position GMA welding. Int J Adv Manuf Technol 79, 183–196 (2015). https://doi.org/10.1007/s00170-015-6818-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-6818-7