Abstract
Although millions of tonnes of metals are recycled around the world every year, even more can be done if the proper economic incentives are present. Increasing the rate of recycle will slow the growth of primary production and reduce the potential for environmental overload. But to progress beyond the present state of affairs, public opinion, regulations and economics must combine to encourage the responsible reprocessing of metal wastes.
Similar content being viewed by others
References
C.J. Schmitz, World Non-ferrous Metal Production and Prices, 1700–1976 (Frank Cass & Co., Ltd., 1979).
Metal Statistics, various annual eds., (Frankfurt-an-Main, FRG: Metallgesellschaft Aktiengesellschaft).
U.S. Bureau of Mines Minerals Yearbook, U.S. Dept. of Interior (1986, 1988).
Scrap Processingand Recycling, (Washington, D.C.: Institute of Scrap Recycling Industries, vol. 45, 1988; vol. 46, 1989).
Recycling Today (Cleveland, OH: GIE Inc., vol. 26, 1988; vol. 27, 1989).
R.S. Kaplan and H. Ness, “Recycling of Metals,” Conservation and Recycling, vol. 10 (1987), pp. 1–13; also in Encyclopedia of Materials Science and Engineering, Pergamon Press (1986).
Recycled Metals in the 1980s (New York: National Association of Recycling Industries, 1982).
R.J. Fruehan, “Scrap in Iron and Steelmaking,” Recycling and Secondary Recovery of Metals (Warrendale, PA: TMS, 1985), pp. 13–34.
Aluminum Recycling Casebook (Washington, D.C.: Aluminum Association, 1981).
Recycling Aluminum (New York: National Association of Recycling Industries, 1981).
J.H.L. VanLinden, “Aluminum Recycling—Everybody’s Business, Technological Challenges and Opportunities,” Light Metals 1990 (Warrendale, PA: TMS, 1990), pp. 675–682.
T. Rottwinkel and N. Sanhen, “Aluminum Recycling—A European Perspective,” Light Metals 1990 (Warrendale, PA: TMS, 1990), pp. 683–689.
Recycling Copper and Brass (New York: National Association of Recycling Industries, 1980).
Recycling of Nickel Alloys and Stainless Steel Scrap (New York: National Association of Recycling Industries, 1977).
Recycling Precious Metals (New York: National Association of Recycling Industries, 1977).
Recycling of Zinc (New York: National Association of Recycling Industries, 1978).
B.C. Braun, W.L. Dalmijn and W.P.C. Duyvesteyn, “Recovery of Non-ferrous Metals from Waste Using an Eddy-Current Separator with Rotating Permanent Samarian-Cobalt Magnets,” Recycling and Secondary Recovery of Metals (Warrendale, PA: TMS, 1985), pp. 641–654.
K.A. Bowman, “Alcoa’s Used Beverage Can (U.B.C.) Alloy Separation Process,” Recycling and Secondary Recovery of Metals (Warrendale, PA: TMS, 1985), pp. 429–443.
N.F. Fitzpatrick, J.G. McCubbin and J.F. Evans, “Fundamentals of Decoating Organically Coated Aluminum Scrap,” Light Metals 1986 (Warrendale, PA: TMS, 1986), pp. 793–796.
J.C. McCubbin, J. Ayres and S. McRae, “Decoating of Used Beverage Containers in a Thin Down-Flow Bed,” Light Metals 1986 (Warrendale, PA: TMS, 1986), pp. 917–924.
A. Wirtz, “Aluminum Beverage Can Recycling,” Aluminum Industry, 8, 9 (Sanderstead, Surrey, UK: Mech Eng Publications Ltd., 1989), pp. 37–39.
R.D. Prengaman, “Reverberatory Furnace—Blast Furnace Smelting of Battery Scrap at R.S.R.,” Lead-Zinc-Tin ’80 (Warrendale, PA: TMS, 1980), pp. 985–1001.
G. Schenker, “Lead Recycling from Battery Scrap and Other Raw Materials in Metaleurop’s Lead Smelting Plant in Oker,” Lead-Zinc ’90 (Warrendale, PA: TMS, 1990) pp. 979–999.
R.M. Reynolds, P.E. Hudson, E.K. Hudson and M. Olper, “Advances in Lead-Acid Battery Recycling; Engitec’s Automated CX Breaker System,” Lead-Zinc ’90 (Warrendale, PA: TMS, 1990) pp. 1001–1022.
R.D. Prengaman and H. McDonald, “R.S.R.’s Full Scale Plant to Electrowin Lead from Battery Scrap,” Lead-Zinc ’90 (Warrendale, PA: TMS, 1990) pp. 1045–1056.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Spoel, H. The current status of scrap metal recycling. JOM 42, 38–41 (1990). https://doi.org/10.1007/BF03220922
Issue Date:
DOI: https://doi.org/10.1007/BF03220922