Abstract
In the present times, demand of fiber-reinforced polymer (FRP) composites materials is very high because of their enhanced mechanical, dynamic and thermal properties over the conventional material. The wide spread applications and growth of FRP composite demand need of protective coatings and barrier layers developed. The performance of composite in long term is heavily dependent upon the degree of protection provided to resist the corrosive and deteriorating environment to which these composites will be exposed. The use of nanofiller coating on FRP composite is expected to give significant protection against corrosion, blister or delaminate. A review of recent development in nanofiller coating of FRP composite along with overview of nanocomposite coating properties and characterization methods is presented in this paper.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pinnavaia, T.J., Beall, G.W. (eds.) Polymer-Clay Nanocomposites. Wiley (2000)
Anandhan, S., Bandyopadhyay, S.: Nanocomposites and Polymers with Analytical Methods, pp. 3–29. Rijeka, Croatia, Intech (2011)
McCrum, N.G., Buckley, C.P., Bucknall, C.B., Bucknall, C.B.: Principles of Polymer Engineering. Oxford University Press, USA (1997)
Giese, R.F., Van Oss, C.J.: Colloid and Surface Properties of Clays and Related Minerals, vol. 105. CRC Press (2002)
Kumar, S., Sundara Raju, Mohana, N., Sampath, P.S., Jayakumari, L.S.: Effects of nanomaterials on polymer composites—an expatiate view. Rev Adv Mater Sci 38(1) (2014)
Van Den Einde, L., Zhao, L., Seible, F.: Use of FRP composites in civil structural applications. Constr. Build Mater. 17(6–7), 389–403 (2003)
Robert, M., Benmokrane, B.: Effect of aging on bond of GFRP bars embedded in concrete. Cement Concr. Compos. 32(6), 461–467 (2010)
Davalos, J.F., Chen, Yi., Ray, I.: Effect of FRP bar degradation on interface bond with high strength concrete. Cement Concr. Compos. 30(8), 722–730 (2008)
Sunter, D.A., Morrow III, W.R., Cresko, J.W., Liddell, H.P.H.: The manufacturing energy intensity of carbon fiber reinforced polymer composites and its effect on life cycle energy use for vehicle door lightweighting. In: Proceedings of the 20th International Conference on Composite Materials (ICCM), Copenhagen, Denmark (2015)
Dorigato, A., Morandi, S., Pegoretti, A.: Effect of nanoclay addition on the fiber/matrix adhesion in epoxy/glass composites. J. Compos. Mater. 46(12), 1439–1451 (2012)
Luo, J.J., Daniel, I.M.: Characterization and modeling of mechanical behavior of polymer/clay nanocomposites. Compos. Sci. Technol. 63(11), 1607–1616 (2003)
Moon, R.J., Martini, A., Nairn, J., Simonsen, J., Youngblood, J.: Cellulose nanomaterials review: structure, properties and nanocomposites. Chem. Soc. Rev. 40(7), 3941–3994 (2011)
Roman, M.: Toxicity of cellulose nanocrystals: a review. Indus. Biotechnol. 11(1), 25–33 (2015)
Hansen, F., Brun, V., Keller, E., Wegner, T., Meador, M., Friedersdorf, L.: Cellulose nanomaterials—a path towards commercialization workshop report (2014): 1–44
Hashin, Z.: Thermoelastic properties of fiber composites with imperfect interface. Mech. Mater. 8(4), 333–348 (1990)
Nairn, J.A.: Generalized shear-lag analysis including imperfect interfaces. Adv. Composit. Lett. 13(6), (2004): 096369350401300601.
Gao, S.L., Mäder, E.: Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites. Compos. A Appl. Sci. Manuf. 33(4), 559 (2002)
Madhukar, M.S., Drzal, L.T.: Fiber-matrix adhesion and its effect on composite mechanical properties: II. longitudinal (0) and transverse (90) tensile and flexure behavior of graphite/epoxy composites. J. Compos. Mater. 25(8), 958–991 (1991)
Kinsella, M., Murray, D., Crane, D., Mancinelli, J., Kranjc, M.: Mechanical properties of polymeric composites reinforced with high strength glass fibers. Int. SAMPE Tech. Conf. 33, 1644–1657 (2001)
Tang, L., Weder, C.: Cellulose whisker/epoxy resin nanocomposites. ACS Appl. Mater. Interf. 2(4), 1073–1080 (2010)
Girouard, N., Schueneman, G.T., Shofner, M.L., Carson Meredith, J.: Exploiting colloidal interfaces to increase dispersion, performance, and pot-life in cellulose nanocrystal/waterborne epoxy composites. Polymer 68, 111–121 (2015)
Ansari, F., Galland, S., Johansson, M., Plummer, C.J.G., Berglund, L.A.: Cellulose nanofiber network for moisture stable, strong and ductile biocomposites and increased epoxy curing rate. Compos. Part A: Appl. Sci. Manuf. 63, 35–44 (2014)
Ahmad, F.S., Foret, G., Le Roy, R.: Bond between carbon fibre-reinforced polymer (CFRP) bars and ultra high performance fibre reinforced concrete (UHPFRC): Experimental study. Constr. Build. Mater. 25(2), 479–485 (2011)
Achillides, Z. Bond Behaviour of FRP Bars in Concrete. PhD diss., University of Sheffield (1998)
Tighiouart, B., Benmokrane, B., Gao, D.: Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars. Constr. Build. Mater. 12(8), 453–462 (1998)
Cosenza, E., Manfredi, G., Realfonzo, R.: Behavior and modeling of bond of FRP rebars to concrete. J. Compos. Constr. 1(2), 40–51 (1997)
Achillides, Z., Pilakoutas, K.: Bond behavior of fiber reinforced polymer bars under direct pullout conditions. J. Compos. Constr. 8(2), 173–181 (2004)
Chang, J.J., Yeih, W., Tsai, C.L.: Enhancement of bond strength for epoxy-coated rebar using river sand. Constr. Build. Mater. 16(8), 465–472 (2002)
Tasong, W.A., Cripps, J.C., Lynsdale, C.J.: Aggregate-cement chemical interactions. Cem. Concr. Res. 28(7), 1037–1048 (1998)
Acknowledgements
Authors are grateful to have been supported by the Royal Academy of Engineering under the auspices of “UK-India Industry-Academia Partnership Programme” between Crankfield University, UK, and KIET, India (Grant No. IAPP18-19295).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Parihar, V.S., Baranwal, A., Gautam, V., Bajpai, S., Gupta, A., Khan, K.L.A. (2021). A Review of Nanofiller Coating on FRP Composites. In: Muzammil, M., Chandra, A., Kankar, P.K., Kumar, H. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-8704-7_52
Download citation
DOI: https://doi.org/10.1007/978-981-15-8704-7_52
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8703-0
Online ISBN: 978-981-15-8704-7
eBook Packages: EngineeringEngineering (R0)