Skip to main content

Influence of Mass Flow Rate and Concentration of Al2O3 Nanofluid on Thermal Performance of a Double Pipe Heat Exchanger

  • Conference paper
  • First Online:
Advances in Mechanical Processing and Design

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

  • 704 Accesses

Abstract

Heat transfer is a very important process for industrial purposes. While there has been a constant change in the design of heat exchangers over the years which has made it more compact and efficient than ever, the area of modifications in the heat transfer fluid itself has not seen many breakthroughs. Apart from changing the design of the heat exchanger, another method is to use heat carrier fluids which have higher thermal conductivity and heat capacity. Some nanofluids (colloidal solutions of nano-sized particles suspended in a suitable base fluid) of metal oxides show superior thermal properties as compared to water. In this paper, numerical and experimental analyses have been performed to find the improvement in the overall heat transfer coefficient of a double pipe heat exchanger when Al2O3 nanofluid of 0.25% concentration is used of variable mass flow rate. Here Al2O3 nanofluid’s result has been compared with normal water are used to calculate. The overall heat transfer coefficient has been calculated by the measured value of hot and cold fluids inlet–outlet temperatures. First simulation of temperature variation has been observed in ANSYS, and then simulated result has been compared with experimental results. The experimental result shows that the overall heat transfer coefficient increases with the increase of flow rate. At 120 LPH, 240 LPH, and 320 LPH, an improvement of 44.58, 26.37, and 2.78% in the heat transfer coefficient has been observed.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Abbreviations

U :

Overall heat transfer coefficient (W/m2°C)

Q :

Average heat transfer rate (W)

A :

Heat transfer surface area (m2)

ΔTlm:

Logarithmic mean temperature difference (°C)

T Hi :

Hot water inlet temperature

T Ho :

Hot water outlet temperature

T Ci :

Cold water inlet temperature

T Co :

Cold water outlet temperature

m :

Mass flow rate (Kg/s)

C p :

Specific heat (KJ/KgK)

ΔT:

Temperature difference

w :

Weight fraction of nanoparticles

References

  1. Choi SUS, Eastman JA (1995) Eastman enhancing thermal conductivity of fluids with nanoparticles. In: ASME international mechanical engineering congress & exposition, 12–17 Nov, San Francisco, CA

    Google Scholar 

  2. Thakre PB, Pachghare PR (2017) Performance analysis on compact heat exchanger. Mater Today Proc 4(8):8447–8453

    Article  Google Scholar 

  3. Bhosle BB, Hatkar DN (2018) Experimental investigation of heat transfer co-efficient in nanofluids. Int Res J Eng Technol (IRJET) 05(03). e-ISSN: 2395–0056

    Google Scholar 

  4. Anil Kumar Naik B, Venu Vinod A (2018) Heat transfer enhancement using non-Newtonian nanofluids in a shell and helical coil heat exchanger. Exp Thermal Fluid Sci 90:132–142

    Google Scholar 

  5. Tiwari AK, Ghosh P, Sarkar J (2013) Performance comparison of the plate heat exchanger using different nanofluids. Exp Thermal Fluid Sci 49:141–151

    Article  Google Scholar 

  6. Bahiraei M, Rahmani R, Yaghoobi A, Khodabandeh E, Mashayekhi R, Amani M (2018) Recent research contributions concerning use of nanofluids in heat exchangers: a critical review. Appl Therm Eng 133:137–159

    Article  Google Scholar 

  7. Han D, He WF, Asif FZ (2017) Experimental study of heat transfer enhancement using nanofluid in double tube heat exchanger. Energy Procedia 142:2547–2553

    Article  Google Scholar 

  8. Zhu HT, Zhang CY, Tang YM, Wang JX (2007) Novel synthesis and thermal conductivity of CuO nanofluid. J Phys Chem C 111(4):1646–1650

    Article  Google Scholar 

  9. Kwak K, Kim C (2005) Viscosity and thermal conductivity of copper oxide nanofluid dispersed in ethylene glycol. Korea-Australia Rheol J 17(2):35–40

    Google Scholar 

  10. Liu M-S, Lin MC-C, Huang I-T, Wang C-C (2006) Enhancement of thermal conductivity with CuO for nanofluids. Chem Eng Technol 29(1):72–77

    Article  Google Scholar 

  11. Agarwal R, Verma K, Agrawal NK, Duchaniya RK, Singh R (2016) Synthesis, characterization, thermal conductivity and sensitivity of CuO nanofluids. Appl Therm Eng 102:1024–1036

    Article  Google Scholar 

  12. Vajjha RS, Das DK, Namburu PK (2010) Numerical study of fluid dynamic and heat transfer performance of Al2O3 and CuO nanofluids in the flat tubes of a radiator. Int J Heat Fluid Flow 31(4):613–621

    Article  Google Scholar 

  13. Fotukian SM, Nasr Esfahany M (2010) Experimental study of turbulent convective heat transfer and pressure drop of dilute CuO/water nanofluid inside a circular tube. Int Commun Heat Mass Transfer 37(2):214–219

    Article  Google Scholar 

  14. Usri NA, Azmi WH, Mamat R, Abdul Hamid K, Najafi G (2015) Thermal conductivity enhancement of Al2O3 nanofluid in ethylene glycol and water mixture. Energy Procedia 79:397–402

    Google Scholar 

  15. Yu W, Xie H, Li Y, Chen L, Wang Q (2012) Experimental investigation on the heat transfer properties of Al2O3 nanofluids using the mixture of ethylene glycol and water as base fluid. Powder Technol 230:14–19

    Article  Google Scholar 

  16. Syam Sundar L, Venkata Ramana E, Singh MK, Sousa ACM (2014) Thermal conductivity and viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids for heat transfer applications: An experimental study. Int Commun Heat Mass Transfer 56:86–95

    Article  Google Scholar 

  17. Naseema, Nawazish Mehdia S, Manzoor Hussain M, Khader Basha S, Abdul Samad M (2018) Heat enhancement of heat exchanger using aluminium oxide (Al2O3), copper oxide (Cuo) nano-fluids with different concentrations. Mater Today Proc 5(2):6481–6488

    Google Scholar 

  18. Hashemabadi SH, Hoseini SM, Seifi Jamnani M (2015) Experimental study of heat transfer enhancement using water/ethylene glycol based nanofluids as a new coolant for car radiators. Int J Autom Mech Eng 12:2857–2865

    Article  Google Scholar 

  19. Kumar N, Sonawane SS, Sonawane SH (2018) Experimental study of thermal conductivity, heat transfer and friction factor of Al2O3 nanofluid. Int Commun Heat Mass Transfer 90:1–10

    Article  Google Scholar 

  20. Venkata Raman E, Singh M, Sousa ACM, Sundar S (2014) Thermal Conductivity and viscosity of stabilized ethylene glycol and water mixture Al2O3 nanofluids for heat transfer applications: an experimental study. Int Commun Heat Mass Transfer 56:86–95

    Article  Google Scholar 

  21. Narendar G, Gupta AVSKS, Krishnaiah A, Satyanarayana MGV (2017) Experimental investigation on the preparation and applications of Nano fluids. Mater Today Proc 4(2):3926–3931

    Article  Google Scholar 

  22. Somasekhar K, Malleswara Rao KND, Sankararao V, Mohammed R, Veerendra M, Venkateswararao T (2018) A CFD investigation of heat transfer enhancement of shell and tube heat exchanger using Al2O3—water nanofluid. Mater Today Proc 5(1):1057–1062

    Article  Google Scholar 

  23. Naraki M, Pegyhambarzadeh SM, Hasembadi SH, Vermahmoudi Y (2013) Parametric study of overall heat transfer coefficient of CuO/water nanofluid in a car radiator. Int J Thermal Sci 66:82–90

    Google Scholar 

  24. Tijani AS, bin Sudirman AS (2018) Thermos-physical properties and heat transfer characteristics of water/anti-freezing and Al2O3/CuO based nanofluid as a coolant for car radiator. Int J Heat Mass Transfer 118:48–57

    Google Scholar 

  25. Agarwal R, Verma K, Agrawal NK, Singh R (2017) sensitivity of thermal conductivity for Al2O3 nanofluids. Exp Thermal Fluid Sci 80:19–26

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Anirban Sur .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2021 Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Gulia, V., Sur, A. (2021). Influence of Mass Flow Rate and Concentration of Al2O3 Nanofluid on Thermal Performance of a Double Pipe Heat Exchanger. In: Pant, P., Mishra, S.K., Mishra, P.C. (eds) Advances in Mechanical Processing and Design. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-7779-6_3

Download citation

  • DOI: https://doi.org/10.1007/978-981-15-7779-6_3

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-15-7778-9

  • Online ISBN: 978-981-15-7779-6

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics