Abstract
The complex nature of heat flow behaviour due to interruption of metal deposition in pulse current gas metal arc weld which is affecting its thermal behaviour has been discussed to realise the basis of selection of pulse parameters to produce a sound weld. The thermal characteristics of P-GMA weld are critically understood through model analysis considering the influence of arc heating and super heating of filler metal under the pulse current parameters of simultaneously interactive nature. The behaviour of metal transfer under pulse current that is governing the cavity formation in weld pool and temperature distribution in weld has been described to express the mechanism of establishing the isotherm and thermal cycle of weld pool and heat affected zone of weld joint. The thermal nature of P-GMAW process has been correlated to the factor ϕ as the summarized influence of pulse parameters for better understanding of more precise control of the welding process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Allum, C.J., Quintino, L.: Control of fusion characteristics in pulsed current MIG welding, Part-II, Simple model of fusion characteristics. Metal Constr 17(5), 314R–317R (1985)
Maruo, H., Hirata, Y.B.: Study of pulsed MIG welding. IIW Doc. SG 212-585-84, Welding Department, Osaka University, Japan, July 1984
Waszink, J.H., Piena, M.J.: Experimental investigation of drop detachment and drop velocity in GMAW. Weld. J. 65(11), 289s–298s (1986)
Amin, M.: Pulse current parameters for arc stability and controlled metal transfer in arc welding. Metal Constr 15(5), 272–287 (1983)
Jilong, Ma., Apps, R.L.: MIG transfer discovery of importance to industry. Weld. Metal Fab. 14(9), 307–316 (1982)
Christensen, N., de Davies, V.L., Gjermundsen, K.: Distribution of temperatures in arc welding. Br. Weld. J. 12(2), 54–75 (1965)
Kim, Y.S., Eagar, T.W.: Metal transfer in pulsed current gas metal arc welding. Weld. J. 72(7), 279s–287s (1993)
Choi, S.K., Yoo, C.D., Kim, Y.S.: Dynamic simulation of metal transfer, Part I: Globular and spray transfer modes. Weld. J. 77(1), 38s–44s (1998)
Ueguri, S., Hara, K., Komura, H.: Study of metal transfer in pulsed GMA welding. Weld. J. 64(8), 242–250s (1985)
Jones, L.A.: Dynamic electrode forces in gas metal arc welding. Ph.D. dissertation, Massachusetts Institute of Technology, Cambridge, Mass (1996)
Matsuda, F., Ushio, M., Itonaga, K., Yokoo, T.: Pulsed CO2 welding, Tech. Report, IIW Doc. 212-586-84 (1984)
Jacobsen, N.: Monopulse investigation of drop detachment in pulsed gas metal arc welding. Phys. D, Appl. Phys. 25, 783–797 (1992)
Rosenthal, D.: The theory of moving sources of heat and its application to metal treatments. ASME Trans. 68, 849–866 (1946)
Nguyen, N.T., Ohta, A., Matsuoka, K., Suzuki, N., Maeda, Y.: Analytical solutions for transient temperature of semi infinite body subjected to 3 – D moving heat sources. Weld. J. 78, 265s–274s (1999)
Smati, Z.: Automatic pulsed MIG welding. Weld. J. 65(1), 38s–44s (1986)
Needham, J.C.: Pulse controlled consumable electrode welding arcs. Br. Weld. J. 12(4), 191–197 (1965)
Randhawa, H.S.: Investigation into positional welding of structural steel using pulse current GMAW process. Ph.D. Dissertation, UOR, Roorkee (1999)
Kumar, S., Bhaduri, S.C.: Three dimensional finite element modeling of gas metal arc welding. Met. Mater. Trans. B 25B, 435–441 (1994)
Lancaster, J.F.: The physics of welding, 1st edn, pp. 134–230. IIW, Pergamon Press, New York (1984)
Goldak, J., Chakravarti, A., Bibby, M.: A new finite element model for welding heat sources. Met. Mater. Trans. 15B, 299–305 (1984)
Quintino, L., Allum, C.J.: Pulsed GMAW: interactions between process parameters, Part I. Weld. Met. Fab. 16(4), 126–129 (1984)
Ghosh, P.K., Gupta, S.R., Randhawa, H.S.: Analytical studies on characteristics of vertical up bead on plate weld deposition using pulsed current GMAW. Int. J. Joining Mater. 12(3), 76–85 (2000)
Alum, C.J.: Metal transfer in arc welding as a varicose instability: II. Development of model for arc welding. J. Phys. D Appl. Phys. 18, 1447–1468 (1985)
Ghosh, P.K., Dorn, L., Hübner, M., Goyal, V.K.: Arc characteristics and behaviour of metal transfer in pulsed current GMA welding of aluminium alloy. J. Mater. Process. Tech. 194(4), 163–175 (2007)
Goyal, V.K., Ghosh, P.K., Saini, J.S.: Analytical studies on thermal behaviour and geometry of weld pool in pulsed current gas metal arc welding. J. Mater. Process. Tech. 209, 1318–1336 (2009)
Essers, W.G., Walter, R.: Heat transfer and penetration mechanisms with GMA and plasma-GMA welding. Weld. J. 60(2), 37–42s (1981)
Randhawa, H.S., Ghosh, P.K., Gupta, S.R.: Geometric characteristics of pulsed current positional GMA weld. ISIJ Int. 38(4), 276–284 (1998)
Metals Handbook: Properties and Selection: Nonferrous Alloys and Pure Metals, 10th edn, vol. 2, p. 1099. ASM International, Metal Park, Ohio (1979)
Jeong, S.K., Cho, H.S.: An analytical solution to predict the transient temperature distribution in fillet arc welds. Weld. J. 76, 223s–232s (1997)
Von Horn, K.R.: Aluminium, vol. 1, Physical Metallurgy and Phase Diagrams, vol. 4. ASM, Metal Park, Ohio (1968)
Mondolfo, L.F.: Aluminium Alloys: Structure and Properties. Butterworths, London (1979)
Smith, C.S., Palmer, E.W.: Thermal and electric conductivities of copper alloys. Trans. AIME 117, 225–243 (1935)
Welding Alcoa Aluminum, Aluminum Company of America, Pittsburgh, Pennsylvania: Weld. J. 67, 18s–27s (1988). (1988)
Saha, S.C., Ghosh, A.K., Malhotra, S.L.: Heat transfer in welding—a numerical approach. Indian Weld. J. 26(4), 8–12 (1993)
Komanduri, R., Hou, Z.B.: Thermal analysis of the arc welding process: Part I. General solutions. Met. Mater. Trans. 31B, 1353–1370 (2000)
Gupta, P.C., Ghosh, P.K., Visa, S.: Influence of pulse frequency on the properties of HAZ in pulsed MIG welded Al-Zn-Mg alloy. In: Proceedings of the International Conference on Welding Technology in Developing Countries Present Status and Future Needs, 1-71-77, 26–28 Sept 1988
Kim, Y.S., Mceligot, D.M., Eagar, T.W.: Analysis of electrode heat transfer in gas metal arc welding. Weld. J. 70(1), 20s–31s (1991)
Jilong, Ma., Apps, R.L.: Analysing metal transfer during MIG welding. Weld. Met. Fab. 15(4), 119–128 (1983)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Ghosh, P.K. (2017). Thermal Behaviour of Pulse Current Gas Metal Arc Weld. In: Pulse Current Gas Metal Arc Welding. Materials Forming, Machining and Tribology. Springer, Singapore. https://doi.org/10.1007/978-981-10-3557-9_4
Download citation
DOI: https://doi.org/10.1007/978-981-10-3557-9_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-3556-2
Online ISBN: 978-981-10-3557-9
eBook Packages: EngineeringEngineering (R0)