Abstract
In many industrial applications, the material surface is, most of the time, the preponderant factor in the life time of the piece. In such cases, it is important to be able to improve the superficial properties of the material1,2,3,4. One of the numerous known solutions 5,6,7,8, is to deposed, where the constraints are supposed to occur, a hardfacing alloy which have the desired wear resistance properties: one calls that the cladding process.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
M. JEANDIN «Traitements par laser et faisceaux d’électrons». Technique de i’ingénieur, Matériaux et techniques, pp 15–22, Dec 89.
P. G. MOORE, L. S. WEINMAN, «Surface alloying using high-power continuous laser». SPIE, Laser Applications in Materials Processing, San Diego, pp 120–125, 1979.
CONFERENCES, «Surface engineering: practice and prospects» Surface Engineering, Vol 7, N°2, pp 109–115, 1991.
W. M. STEEN, «Laser Surface Finishing» Trans IMF, Vol 67, pp 124–126, 1989.
W. M. STEEN, “Adaptative control of laser material processing”. LAMP’92, NAGOAKA, pp 439–444, Jun 92.
W. M. STEEN, “Laser surface claddidng”. Laser surface treatment ofmetal,Nato ASI, pp 369–388, 1986.
T TAKEDA, K. ADACHI, H. HISADA, “Laser alloying of aluminium alloy substrate”.LAMP’92, NAGOAKA, pp 795–800, Jun 92.
F. LEMOINE, “Réalisation de revêtements en alliage réfractaires sur alliage métallique a l’aide de lasers Nd:YAG continu ou impulsionnel: modélisation statistique et analytique de la section des cordons obtenus”. Thèse de l’Ecole Centrale de Lyon, 1994.
C. HERSCHKORN, “traitement de surface par laser CO2 de puissance avec apport de poudre: Application aux alliages Aluminium/nickel”. These de l’Université de Paris Sud, 1994.
P. SALLAMAND, «Alliage de surface et revêtements élaborés sous faisceau laser par projection de poudre sur substrat base altuninium: caractérisation microstructurale, mécanique et tribologique». Thèse de l’INSA, 1994.
J-D. WAGNIERE, C. F. MARSDEN, A. FRENK, M. PICASSO, H. J. RUSTERHOLZ, “Cartes de procédé pour le recouvrement par laser CO2”. Proc of the 5th international conference on welding and melting by electron and laser beams, pp 451–458, Jun 93.
W. M. STEEN, V. M. WEERASINGHE, P. MONSON, “Some aspects of the formation of laser clad tracks”. SP IE, High power laser and their industrial application, Vol 650, pp 226–234, Apr 1986.
Z. XIAO Y. AN, T. ZENGYI, Z. BEIDI, C. KUN, “Parameters investigation of laser cladding coating auto-feeding apparatus”. LAMP’92, NAGOAKA, pp 831–836, Jun 92.
P.-A. VETTER, Th. ENGEL, J. FONTAINE, “Laser cladding: the relevant parameters for process contror.”, Vol 2207, pp 452–462, 1994.
A. Frenk, «Recouvrement par laser: microstructure et comportement en frottement d’un alliage à base Cobalt».These N° 1101, Ecole Polytechnique Fédérale de Lausanne, 1993.
Y. P. KATTHURIA, A. TSUBOI, «Laser cladding of Stellite: a detailed analysis». Europtio, SPIE, Besançon, May 96.
B. GRUNENWALD, St. NOWOTNY, W. HENNIG, F. DAUSIGER, H. HUGEL, “New technological developments in laser cladding”. ICALEO’93, pp 934–944, 1993.
L LI, W.M. STEEN, R.D. HIBBERD, D.J. BROOKFIELD, “In-process clad quality monitoring using optical method”. SPIE Proceedings series, Vol 1279, n° 10, pp 89–100, 1990.
L LI, W.M. STEEN, N QI, D.J. BROOKFIELD, “On-line Laser Weld Sensing For Quality Control”. ICALEO,pp 411–421, 1990.
L. LI, W. M. STEEN, “Sensing, modelling and closed loop control of powder feeder for laser surface modification”. ICALEO’93, pp 965–974, 1993.
J. Y. FENG, B. QUAYLE, P.J. MODERN, W. M. STEEN, “Computer control of laser multipowder feeder cladding system for optimal alloy scan of corrosion and wear resistance”. LAMP’92, NAGOAKA, pp 819–824, Jun 92.
F. MERIAUDEAU, E. RENIER, F. TRUCHETET «CCD technology applied to laser cladding applications». IS&T/SPIE Symposium on electronic imaging: science and technology, SAN JOSE, Feb 1996.
E. RENIER, F. MERIAUDEAU, F. TRUCHETET «CCD technology applied to industrial welding applications». MELECONJ6, BARI, Italy,pp 1335–1338, May 1996.
E. RENIER, F. MERIAUDEAU, F. TRUCHETET, H. ANDRZEJEWSKI, P. SUZEAU, “ Near infrared temperature imaging in industry with CCD camera” QCVA 95, Le Creusot, pp 273–279, May 95.
F. MERIAUDEAU, E RENIER, F. TRUCHETET, “Uncertainty commited on temperature measurements” Metrology, Nîmes, pp 189–194, October 1995.
F. MERIAUDEAU, E. RENTER, F. TRUCHETET, «Temperature imaging and image processing in steel industry» Submitted for publication to Optical Engineering.
A.S. ANDERSON “Accurate noncontact measurement of the aluminum surface”.Sensors: workshop, Atlanta, pp 91–106, May 1986.
P. GUISE “Développement d”une caméra à réseau linéaire de photodiodes pour la mesure de profils de température”. Actes de la rencontre SFTNancy, pp 389–399, 1989.
P. CIELO, G. VAUDREUIL “Infrared temperature sensors for control of the surface melting process on superconducting ceramics”. Proceedings of LAMP ‘92, Nagoaka, pp 421–426, 1992.
WEN HSIANG TSAI, «Moment Preserving thresholding: a new approach». Computer Vision, Graphics and Image Processing, N°29, pp 377–393, 1985.
C. FERNANDEZ, C. PLATERO, «Vision system for on-line surface inspection in aluminium casting process» IECON93, pp 1854–1859, Hawai, Nov 93.
F. MERIAUDEAU, O. LALIGANT, F. TRUCHETET, “ Etudes comparatives de différents détecteurs de contours et segmentation au sens contours par frames multiéchelles” Quinzième colloques GRETSI, pp 617–620, Sep 95.
C. Dumont, E. Fauvet, F. Truchetet, «Geometrical characterization of surface defect by artificial vision with a real time algorithm», IEEE Intenational Symposium on Industrial Electronics, Athènes, Greece, Vol 2, pp 529–534, 1995.
J-M. Jouvard, F. Lemoine, Th. Malot, D.F. Grevey, A.B. Vannes, «Laser Cladding Modeling: Influence of the Substrate and Sprayed Materials during processing at lower power». ICALEO’95, San_Diego, 1995.
C. Herschkorn, “traitement de surface par laser C02 de puissance avec apport de poudre: Application aux alliages Aluminium/nickel”. These de l’Université de Paris Sud, 1994.
Ph. Lagain, “Contribution expérimentale aux traitements de surface par laser avec apport de poudre”. Thèse de l’Université d ‘Aix Marseille II, 1989.
M. M. Galloway, «Texture analysis using grey level run lenght» Computer Graphics and Image Processing, Vol 4, pp 172–179, 1975.
J.P. Coquerez « Analyse d’images: filtrage et segmentation», Collection Traitement du Signal, Ed Masson, 1995.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media New York
About this chapter
Cite this chapter
Meriaudeau, F., Renier, E., Dumont, C., Truchetet, F. (1997). Vision Control System for the Laser Cladding Process. In: Lampropoulos, G.A., Lessard, R.A. (eds) Applications of Photonic Technology 2. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-9250-8_128
Download citation
DOI: https://doi.org/10.1007/978-1-4757-9250-8_128
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-9252-2
Online ISBN: 978-1-4757-9250-8
eBook Packages: Springer Book Archive