Abstract
Porthole die extrusion is a forming process used to manufacture hollow components with different shapes. This forming process is optimized to improve the welding line quality. Process optimization can be achieved by determining the influences that each process parameter has on the pressure along the welding plane. The construction complexity of the die results in research difficulty from an experimental point of view. Even the finite element method (FEM) presents relevant drawbacks primarily because of numerical codes are not capable of simulating the welding phase. Hence, the natural element method (NEM), which allows the joining phase of free surfaces, presents significant advantages. In this work, experimental results obtained using a flexible porthole die are discussed. A suitable 2D geometry was extracted from the die, and both FEM and NEM were conducted. A good agreement among the numerical results was recorded.
Similar content being viewed by others
References
H. Valberg, Extrusion welding in aluminium extrusion, International Journal of Materials and Product Technology, 17 (2002) 497–556.
K. J. Kim, C. H. Lee and D. Y. Yang, Investigation into the improvement of welding strength in three-dimensional extrusion of tubes using porthole dies, Journal of Materials Processing Technology, 130–131 (2002) 426–431.
L. Jung Min, K. Byung Min and K. Chung Gil, Effects of chamber shapes of porthole die on elastic deformation and extrusion process in condenser tube extrusion, Materials and Design, 26 (2005) 327–336.
L. Donati and L. Tomesani, The effect of die design on the production and seam weld quality of extruded aluminum profiles, Journal of Materials Processing Technology, 164–165 (2005) 1025–1031.
P. F. Bariani, S. Bruschi and A. Ghiotti, Physical simulation of longitudinal welding in porthole-die extrusion, CIRP Annals - Manufacturing Technology, 55(1) (2006) 287–290.
E. Ceretti, L. Fratini, F. Gagliardi and C. Giardini, A new approach to study material bonding in extrusion porthole dies, CIRP Annals - Manufacturing Technology, 58 (2009) 259–262.
I. Fitta and T. Sheppard, Material flow and prediction of extrusion pressure when extruding through bridge dies using FEM, Proc. of VII Int. Aluminum Extrusion Tech. Seminar, Chicago, USA (2000) 141–147.
L. Li, H. Zhang, J. Zhou, J. Duszczyk, G.Y. Li and Z. H. Zhong, Numerical and experimental study on the extrusion through a porthole die to produce a hollow magnesium profile with longitudinal weld, Materials and Design, 29(6) (2008) 1190–1198.
J. S. Ajiboye and M. B. Adeyemi, The effect of selected parameters on temperature distribution in axisymmetric extrusion process, Journal of Mechanical Science and Technology, 21 (2007) 1553–1559.
M. Tstomu, K. Takashi and M. Makoto, A new extrusion method joining tube and sheet with holed rib, Journal of Mechanical Science and Technology, 21 (2007) 1548–1552.
K. Hyun-Gyu and K. Hye-Young, An adaptive procedure based on combining finite elements with meshless methods, Journal of Mechanical Science and Technology, 23 (2009) 2224–2235.
I. Alfaro, F. Gagliardi, J. Olivera, E. Cueto, L. Filice and F. Chinesta, Simulation of the extrusion of hollow profiles by natural element methods, International Journal of Material Forming, 2(1) (2009) 597–600.
L. Filice, I. Alfaro, F. Gagliardi, E. Cueto, F. Micari and F. Chinesta, A preliminary comparison between finite element and meshless simulations of extrusion, Journal of Materials Processing Technology, 209 (2009) 3039–3049.
L. Donati and L. Tomesani, The prediction of seam welds quality in aluminum extrusion, Journal of Materials Processing Technology, 153–154 (2004) 366–373.
F. Gagliardi, G. Ambrogio and L. Filice, Optimization of aluminium extrusion by porthole die using a down scaled equipment, Key Engineering Materials, 491 (2012) 173–180.
L. Donati and L. Tomesani, Seam welds modeling and mechanical properties prediction in the extrusion of AA6082 alloy, Key Engineering Materials, 367 (2008) 125–136.
C. Bruni, A. Forcellese and F. Gabrielli, Flow modelling of AA6082 aluminium alloy, Proc. of VI International Conference on Advanced Manufacturing Systems and Technology, 20 (2002) 367–374.
J. Fluhrer, Pre-processor - deform Tm 3D version 5.03 user’s manual, Science Forming Technology Corp. Ed., Columbus, OH, USA (2006).
T. Chanda, J. Zhou and J. Duszczyk, 3D FEM simulation of thermal and mechanical events occurring during extrusion trough a channel-shaped die, Proc. of VII International Aluminum Extrusion Tech. Seminar, Chicagol USA (2000) 125–134.
B. Delaunay, Sur la Sphère Vide. A la memoire de Georges Voronoi, Izvestia Akademii Nauk SSSR Otdelenie Matematicheskii i Estestvennyka Nauk, 7 (1934) 793–800.
G. M. Voronoi, Nouvelles applications des paramètres continus à` la théorie des formes quadratiques, Deuxie`me Memoire: Recherches sur les parallélloèdres Primitifs, Journal für die reine und angewandte Mathematik, 134 (1908) 198–287.
R. Sibson, A vector identity for the Dirichlet tesselation, Mathematical Proceedings of the Cambridge Philosophical Society, 87 (1980) 151–155.
R. Sibson, A brief description of natural neighbour interpolation, Interpreting Multivariate Data, John Wiley Ed. V. Barnett (1981) 21–36.
I. Alfaro, F. Gagliardi, E. Cueto, L. Filice and F. Chinesta, Simulation of porthole die extrusion process comparing NEM and FEM modeling, Key Engineering Materials, 424 (2010) 97–104.
J. Sung-Pil, P. Tae-Won, J. J. Kab, Y. Ji-Won, L. Soo-Ho and C. Won-Sun, A study on the optimization method for a multi-body system using the response surface analysis, Journal of Mechanical Science and Technology, 23 (2009) 950–953.
D. Montgomery and R. Myers, Response surface methodology, Second Ed. John Wiley, New York (2002).
Author information
Authors and Affiliations
Corresponding author
Additional information
Recommended by Associate Editor Dae-Cheol Ko
Francesco Gagliardi graduated with a mechanical engineering degree at the University of Calabria (2003). He obtained his PhD at the same university (2007). He was a visiting scholar at Ohio State University, USA (2006), and a visiting researcher both at Aragón Institute of Engineering Research, Spain (2009) and at Institut für Umformtechnik und Leichtbau, Germany (2012). He is currently pursuing a postdoc at the University of Calabria. He has conducted research on different fields of plastic forming processes.
Giuseppina Ambrogio graduated with a management engineering degree at the University of Calabria (1999). She obtained her PhD at the same university (2006) with a dissertation entitled, “An extended analysis on flexible sheet metal forming processes.” During the PhD course, she became a visiting scholar at the Institute of Metal Forming (IBF) of RWTH University of Aachen (Germany), cooperating with the Cold Forming Group for the design of an innovative equipment for the flexible profile rolling of Tailor Rolled Blanks. In November 2005, she became an assistant professor in Manufacturing at the Department of Mechanical Engineering (University of Calabria).
Rights and permissions
About this article
Cite this article
Gagliardi, F., Alfaro, I., Ambrogio, G. et al. NEM-FEM comparison on porthole die extrusion of AA-6082. J Mech Sci Technol 27, 1089–1095 (2013). https://doi.org/10.1007/s12206-013-0229-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-013-0229-1