Abstract
Several teeth of a big helical gear were found cracked following coarse-grinding teeth after the gear was carburized. Visual observation shows that cracks are present only on the flanks at one side having an acute angle to the gear end. The cracks propagated from the flanks toward the gear end. SEM observation on the fracture surfaces reveals that intergranular and quasi-cleavage brittle fracture is the cracking mechanism of the flanks. The cracked flanks at the “acute angle” side have a weak ability to support the grinding stress induced by grinding tooth operation, which is mainly responsible for cracking of the flanks. The thick case-harden depth and weak inter-crystalline strength nature of the carburized layer facilitate the initiation and propagation of crack. Unsuitable grinding operations probably aggravate cracking of the flanks.
Similar content being viewed by others
References
China National Standardization Committee: Determination of Carburized Depth and Metallurgic Examination of Carburizing Structure. GB9450. China Standard (1994) (in Chinese)
Krauss, G.: Steel: “Heat Treatment and Processing Principle”. ASM International, Materials Park, OH (2000)
Asi, O., Can, A.A., Pineault, J., Belassel, M.: The relationship between case depth of gascarburized SAM 8620 steel. Surf. Coat. Technol. 201, 5979–5987 (2007)
Krauss, G.: The microstructure and fracture of a carburized steel. Metall. Trans. 9A, 1527–1535 (1978)
Straffelini, G., Versari, L.: Brittle intergranular fracture of a thread: the role of a carburizing treatment. Eng. Fail. Anal. 16, 1448–1453 (2009)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, Xl., Yu, Zw. Brittle Cracking of Flanks of a Big Gear. J Fail. Anal. and Preven. 12, 689–696 (2012). https://doi.org/10.1007/s11668-012-9614-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-012-9614-9