Skip to main content
Log in

Effects of Sintering Temperature on Structure and Properties of 0.997(KNN-LS-BF)-0.003V2O5 Lead-Free Piezoelectric Ceramics

  • Published:
Journal of Electronic Materials Aims and scope Submit manuscript

Abstract

0.997(KNN-LS-BF)-0.003V2O5 lead-free piezoelectric ceramics were prepared by a traditional sintering method. The effects of sintering temperature on the structure and properties of the 0.997(KNN-LS-BF)-0.003V2O5 ceramics were studied. The results show that the sintering temperature exerts a distinct influence on the phase structure and properties. With the increase in sintering temperature from 1040°C to 1060°C, the main crystallographic phase changes from the orthorhombic symmetry to the tetragonal phase, and the optimum dielectric and piezoelectric properties of samples can be obtained when sintering at 1060°C. However, the dielectric and piezoelectric properties of the samples deteriorate when the sintering temperature exceeds 1060°C.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. B. Noheda, D.E. Cox, G. Shirane, R. Guo, B. Jones, and L.E. Cross, Phys. Rev. B 63, 14103 (2000).

    Article  Google Scholar 

  2. M. Schreiter, R. Gabl, D. Pitzer, R. Primig, and W. Wersing, J. Eur. Ceram. Soc. 24, 1589 (2004).

    Article  CAS  Google Scholar 

  3. R.C. Chang, S.Y. Chu, Y.F. Lin, C.S. Hong, P.C. Kao, and C.H. Lu, Sens. Actuators A: Phys. 138, 355 (2007).

    Article  Google Scholar 

  4. H.B. Yang, Y. Lin, F. Wang, and H.L. Luo, Mater. Manuf. Process. 23, 489 (2008).

    Article  CAS  Google Scholar 

  5. R.Z. Zuo, C. Ye, and X.S. Fang, J. Phys. Chem. Solids 69, 230 (2008).

    Article  CAS  Google Scholar 

  6. M. Jiang, X. Liu, J. Cheng, X. Zhou, M. Deng, Mater. Manuf. Process. 25 (2010) 730.

    Google Scholar 

  7. H.C. Song, K.H. Cho, Y.H. Park, C.W. Ahn, S. Nahm, K. Uchino, S.H. Park, and H.G. Lee, J. Am. Ceram. Soc. 90, 1812 (2007).

    Article  CAS  Google Scholar 

  8. Y. Zhen and J.F. Li, J. Am. Ceram. Soc. 89, 3669 (2006).

    Article  CAS  Google Scholar 

  9. F. Rubio-Marcos, J.J. Romero, M.G. Navarro-Rojero, and J.F. Fernandez, J. Eur. Ceram. Soc. 29, 3045 (2009).

    Article  CAS  Google Scholar 

  10. H.E. Mgbemere, R.P. Herber, and G.A. Schneider, J. Eur. Ceram. Soc. 29, 1729 (2009).

    Article  CAS  Google Scholar 

  11. M. Matsubara, Y. Yamaguchi, W. Sakamoto, K. Kikuta, T. Yogo, and S. Hirano, J. Am. Ceram. Soc. 88, 1190 (2005).

    Article  CAS  Google Scholar 

  12. M.H. Jiang, X.Y. Liu, and G.H. Chen, Scripta Mater. 60, 909 (2009).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hua Wang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wang, H., Zhai, X., Xu, J. et al. Effects of Sintering Temperature on Structure and Properties of 0.997(KNN-LS-BF)-0.003V2O5 Lead-Free Piezoelectric Ceramics. J. Electron. Mater. 42, 458–462 (2013). https://doi.org/10.1007/s11664-012-2346-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11664-012-2346-5

Keywords

Navigation