Abstract
High temperature plastic flow or grain boundary failure in oxide ceramics such as Al2O3 and tetragonal ZrO2 polycrystal (TZP) is sensitive to small levels of doping by various cations. For example, high temperature creep deformation in fine-grained, polycrystalline Al2O3 is highly suppressed by 0.1 mol% lanthanoid oxide or ZrO2-doping. An elongation to failure in superplastic TZP is improved by 0.2–3 mol% GeO2-doping. A high-resolution transmission electron microscopy (HRTEM) observation and an energy-dispersive X-ray spectroscopy (EDS) analysis revealed that the dopant cations tend to segregate along the grain boundaries in Al2O3 and TZP. The dopant effect is attributed to change in the grain boundary diffusivity due to the grain boundary segregation of the dopant cations. A molecular orbital calculation suggests that ionicity is one of the most important parameters to determine the high temperature flow stress, and probably, the grain boundary diffusivity in the oxide ceramics.
Similar content being viewed by others
References
A. H. CHOKSHI and T. G. LANGDON, Mater. Sci. Tech 7 (1991) 577.
J. WANG and R. RAJ, Acta Metal. Mater 39 (1991) 2909.
S. LARTIGUE, L. PRIESTER, F. DUPAU, P. GRUFFEL and C. CARRY, Mater. Sci. Eng A164 (1993) 22.
H. YOSHIDA, K. OKADA, Y. IKUHARA and T. SAKUMA, Phil. Mag. Lett 76 (1997) 9.
H. YOSHIDA, Y. IKUHARA and T. SAKUMA, J. Mater. Res 13 (1998) 2597.
J. CHO, C. M. WANG, H. M. CHAN, J. M. RICKMAN and M. P. HARMER, Acta Mater 47 (1999) 4197.
P. THAVORNITI, Y. IKUHARA and T. SAKUMA, J. Am. Ceram. Soc 81 (1998) 2927.
M. JIMENEZ-MELEND, A. DOMINGUEZ-RODORIGUEZ and A. BRAVO-LEON, ibid 81 (1998) 2761.
J. MIMURADA, M. NAKANO, K. SASAKI, Y. IKUHARA and T. SAKUMA, ibid 84 (2001) 1817.
K. NAKATANI, H. NAGAYAMA, H. YOSHIDA, T. YAMAMOTO and T. SAKUMA, Scripta Mater 49 (2003) 791.
Y. SAKKA, T. ISHII, T. S. SUZUKI, K. MORITA and K. HIRAGA, J. Euro. Ceram. Soc 24 (2004) 449.
D. B. WILLIAMS and C. B. CARTER, in “Transmission Electron Microscopy, IV: Spectroscopy” (Plenum Press, NY, 1996) p. 599.
H. ADACHI, M. TSUKADA and C. SATOKO, J. Phys. Soc. Jpn 45 (1978) 875.
A. H. HEUER, N. J. TIGHE and R. M. CANNON, J. Am. Ceram. Soc 63 (1980) 53.
H. YOSHIDA, T. YAMAMOTO and T. SAKUMA, J. Euro. Ceram. Soc 23 (2003) 1795.
P. WU and A. D. PELTON, J. Alloys Coump 179 (1992) 259.
H. YOSHIDA, Y. IKUHARA and T. SAKUMA, Phil. Mag. Lett 79 (1999) 249.
Idem, Acta Mater 50 (2002) 2955.
R. M. CANNON and R. L. COBLE, in “Deformation of Ceramic Materials, ” edited by R. C. Bradt and R. E. Tressler (Plenum Press, 1974) p. 61.
T. G. LANGDON and F. A. MOHAMED, J. Mater. Sci 13 (1978) 473.
R. M. CANNON, W. H. RHODES and A. H. HEUER, J. Am. Ceram. Soc 63 (1980) 46.
W. SWIATNICKI, S. LARTIGUE-KORINEK and J. Y. LAVAL, Acta Metal. Mater 43 (1995) 795.
K. NAKATANI, H. NAGAYAMA, H. YOSHIDA, T. YAMAMOTO and T. SAKUMA, Mater. Trans, 45 (2004) 2569.
W.-J. KIM, J. WOLFENSTINE and O. D. SHERBY, Acta Metal. Mater 39 (1991) 199.
Y. MA and T. G. LANGDON, Mater. Sci. Eng A168 (1993) 225.
K. MORITA and K. HIRAGA, Acta Mater 50 (2002) 1075.
H. YOSHIDA, Y. IKUHARA, T. SAKUMA, M. SAKURAI and E. MATSUBARA, Phil. Mag 84 (2004) 865.
C. M. WANG, G. S. CARGILL, H. M. CHAN and M. P. HARMER, Acta Mater 48 (2000) 2579.
Y. IKUHARA, P. THAVORNITI and T. SAKUMA, ibid 45 (1997) 5275.
W. D. KINGERY, H. K. BOWEN and D. R. UHLMAN, in “Introduction to Ceramics” (John Wiley and Sons, NY, 1976) p. 41.
K. SASAKI, M. NAKANO, J. MIMURADA, Y. IKUHARA and T. SAKUMA, Mater. Sci. Forum 357–359 (2001) 129.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yoshida, H., Kuwabara, A., Yamamoto, T. et al. High temperature plastic flow and grain boundary chemistry in oxide ceramics. J Mater Sci 40, 3129–3135 (2005). https://doi.org/10.1007/s10853-005-2674-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-2674-4