Skip to main content
Log in

Vibrations of plates with superelastic shape memory alloy wires

  • Published:
Journal of Engineering Mathematics Aims and scope Submit manuscript

Abstract

The article illustrates an approach to the passive vibration control of thin plates utilizing prestressed superelastic shape memory alloy (SMA) wires. The SMA wires can freely slide within protective sleeves that are either embedded within the structure or bonded to its surface. The vibration control mechanism combines an effective continuous elastic foundation representing the support provided by SMA wires to the structure with the energy dissipation as a result of the hysteresis occurring in the wires. The other approach to the vibration control employs superelastic wires attached to the structure at discrete points. The mathematical formulation of the problem presented in the article can be adopted for a rigorous computational analysis. In particular, a closed form expression is obtained for the loss factor in large aspect ratio plates supported at the midspan by a system of parallel SMA wires. As follows from numerical examples presented for such plates, the proposed method offers a significant damping, far exceeding that observed in conventional engineering structures.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Birman V (1997) Review of mechanics of shape memory alloys structures. Appl Mech Rev 50: 629–645

    Article  ADS  Google Scholar 

  2. Pavia A, Savi MA (2006) An overview of constitutive equations for shape memory alloys. Math Probl Eng 2006: 1–30

    Article  Google Scholar 

  3. Lagoudas, DC (ed) (2008) Shape memory alloys, modeling and engineering applications. Springer, New York

    MATH  Google Scholar 

  4. Birman V, Saravanos DA, Hopkins DA (1996) Micromechanics of composites with SMA fibers in uniform thermal fields. AIAA J 34: 1905–1912

    Article  ADS  MATH  Google Scholar 

  5. Baz A, Poh S, Ro J, Mutua M, Gilheany J (eds) (1992) Active control of Nitinol-reinforced composite beam. In: Tzou H-S, Anderson GLIntelligent structural systems. Kluwer, Dordrecht pp 169–212

  6. Baz A, Poh S, Ro J, Gilheany J (1995) Control of natural frequencies of Nitinol-reinforced composite beams. J Sound Vibr 185: 171–185

    Article  ADS  MATH  Google Scholar 

  7. Birman V (2010) Properties and response of composite material with spheroidal superelastic shape memory alloy inclusions subject to three-dimensional stress state. J Phys D 43: 225402–225406

    Article  ADS  Google Scholar 

  8. Toi Y, Lee J-B, Taya M (2004) Finite element analysis of superelastic, large deformation behavior of shape memory alloy helical springs. Comput Struct 82: 1685–1693

    Article  Google Scholar 

  9. Sakuma T, Suzuki A (2007) Superelastic behavior under cyclic loading for coil spring of Ti-Ni shape memory alloy. Mater Trans 48: 422–427

    Article  Google Scholar 

  10. Pan Q, Cho C (2007) The investigation of a shape memory alloy micro-damper for MEMS applications. Sensors 7: 1887–1900

    Article  Google Scholar 

  11. Epps J, Chandra R (1997) Shape memory alloy actuation for active tuning of composite beams. Smart Mater Struct 6: 251–264

    Article  ADS  Google Scholar 

  12. Birman V (2008) Shape memory elastic foundation and supports for passive vibration control of composite plates. Int J Solids Struct 45: 320–335

    Article  MATH  Google Scholar 

  13. Birman V (2007) Enhancement of stability of composite plates using shape memory continuous and point supports. AIAA J 45: 2584–2588

    Article  ADS  Google Scholar 

  14. Seelecke S, Heintze O, Masuda A (2002) Simulation of earthquake-induced structural vibrations in systems with SMA damping elements. Proc SPIE Smart Struct Mater Conf 4697: 238–245

    ADS  Google Scholar 

  15. Zak AJ, Cartmell MP, Ostachowicz WM, Wiercigroch M (2003) One-dimensional shape memory alloy models for use with reinforced composite structures. Smart Mater Struct 12: 338–346

    Article  ADS  Google Scholar 

  16. Gandhi F, Wolons D (1999) Characterization of the pseudoelastic damping behavior of shape memory alloy wires using complex modulus. Smart Mater Struct 8: 49–56

    Article  ADS  Google Scholar 

  17. Nashif AD, Jones DIG, Henderson JP (1985) Vibration damping. Wiley, New York

    Google Scholar 

  18. Birman V, Bert CW (1990) Dynamic stability of reinforced composite cylindrical shells in thermal fields. J Sound Vibr 142: 183–190

    Article  ADS  Google Scholar 

  19. Soedel W (1993) Vibrations of shells and plates. Marcel Dekker, New York

    MATH  Google Scholar 

  20. Ungar EE, Kerwin EM Jr (1962) Loss factors of viscoelastic systems in terms of strain energy. J Acoust Soc Am 34: 954–958

    Article  MathSciNet  ADS  Google Scholar 

  21. Mathematica, 2009. Online Integrator. http://integrals.wolfram.com

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Victor Birman.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Birman, V., Rusnak, I. Vibrations of plates with superelastic shape memory alloy wires. J Eng Math 78, 223–237 (2013). https://doi.org/10.1007/s10665-011-9483-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10665-011-9483-3

Keywords

Navigation