Cited References
A. Hellawell and W. Hume-Rothery,Phil. Trans. R. Soc., A249, p 417–459 (1957).
E. Schürmann and J. Brauckmann,Arch. Eisenhüttenwes., 48(1), p 3–7 (1977).
F. Adcock,J. Iron Steel Inst., 124 (11), p 99–149 (1931).
F. Müller and O. Kubaschewski,High Temp.-High Pressures, 1, p 543–551 (1969).
P. Poyet, P. Guiraldenq and J. Hochmann,Mém. Sci. Rev. Métall., 69(11), p 775–783 (1972).
Additional References
F. H. Hayes and R. Kubitz, Modelling of Sigma Phases in Multicomponent Alloy Systems, Project Meeting Calphad VII, Stuttgart/Schloss Weitenburg, p 190–201 (1978). (Used thermodynamic values for Cr−Fe and three other binary systems in order to derive lattice stability estimates for the σ phase)
Comment by F. H. Hayes, in Summary of Proceedings of the Seventh Calphad Meeting, P. J. Spencer and T. G. Chart, Reporters,Calphad, 2 (3), p 197–205 (1978). (A discussion of [6]. Magnetic influences on the ordering of the σ-phase were stressed by P. A. Miodownik and M. Hillert)
P.J. Spencer, Calculation of Phase Diagrams for Alloy Systems Showing Sigma-Phase Formation,Calculation of Phase Diagrams and Thermochemistry of Alloy Phases, TMS/AIME, 420 Commonwealth Dr., Warrendale, PA 15086, p 14–25 (1979). (Review of the calculations of [4] for the stable and metastable phase boundaries)
Ya. I. Dutchak and V. G. Chekh, The Temperature and Concentration Dependence of Lattice Spacings in Iron— Chromium Solid Solutions,Fiz. Khim. Mekh. Mater., No. 2, p 116–118 (1980) in Russian. (X-ray lattice spacings for 10 to 90% Fe in the 20 to 900°C temperature range)
Author information
Authors and Affiliations
Additional information
extracted from [Rivlin/Raynor], bibliography through 1979.
Rights and permissions
About this article
Cite this article
Raynor, G.V., Rivlin, V.G. The Cr−Fe (Chromium-Iron) system. Bulletin of Alloy Phase Diagrams 2, 99–100 (1981). https://doi.org/10.1007/BF02873713
Issue Date:
DOI: https://doi.org/10.1007/BF02873713