Collection
Perspective to Green Manufacturing and Applications
- Submission status
- Closed
In this issue, the topics of green manufacturing such as design and manufacturing of sustainable products, energy saving and pollution/waste reduction in manufacturing processes, energy/environmentally-friendly materials, and new/renewable energy systems were discussed. As a perspective on green manufacturing and applications, several issues are drawn for energy and material savings as well as exploration to new technologies.
Editors
-
Sung-Hoon Ahn
Seoul National University, Korea
-
Doo-Man Chun
University of Ulsan, Korea
-
Won-Shik Chu
Seoul National University, Korea
Articles (38 in this collection)
-
-
Spot welding of aluminum and cast iron by friction bit joining
Authors (first, second and last of 4)
- Michael Miles
- Sung-Tae Hong
- Yong-Ha Jeong
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1003 - 1006
-
Characterization and recognition of particles for improving cleanability in automotive production
Authors
- Phan Quoc Bao
- Sung Lim Ko
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 977 - 984
-
Study on recycling process for EOL liquid crystal display panel
Authors (first, second and last of 4)
- Kai Zhao
- Zhifeng Liu
- Hao Jiang
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1043 - 1047
-
Study on high temperature processing of biocompatible Ti-10Ta-10Nb alloys
Authors (first, second and last of 11)
- Jaesam Ban
- Kwangmin Lee
- Kwidug Yun
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1099 - 1102
-
A numerical approach to energy savings in heat drying process of drilled and water-cleaned PCB
Authors (first, second and last of 5)
- Gyu-Bong Lee
- Tae-Jun Ku
- Seong-Wook Cho
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 891 - 895
-
Design and fabrication of a light emitting diode-based diffuser sheet-less light guide plate for lighting applications
Authors (first, second and last of 4)
- Yoon Ki Park
- Jae-Young Joo
- Sun-Kyu Lee
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1017 - 1022
-
Failure mechanisms of graded ceramic tool in ultra high speed dry milling of Inconel 718
Authors (first, second and last of 5)
- Guangming Zheng
- Jun Zhao
- Yonghui Zhou
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 943 - 949
-
Ultrasound-assisted synthesis of hybrid nanostructures using RAFT polymerization from the surface of quantum dots
Authors (first, second and last of 5)
- Long Giang Bach
- Md. Rafiqul Islam
- Kwon Taek Lim
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 937 - 942
-
The development of a cylindrical proton exchange membrane fuel cell with an integrated metal-hydride container
Authors (first, second and last of 4)
- Kang In Lee
- Do Kwan Chung
- Chong Nam Chu
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1065 - 1070
-
Numerical investigation of active control for an S809 wind turbine airfoil
Authors
- Tae-Jin Kang
- Warn-Gyu Park
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1037 - 1041
-
Energy saving in line patterning using pulse laser by reducing overlapping rate with rectangular beam shape
Authors (first, second and last of 5)
- Jae-Hoon Lee
- Won-Jin Lee
- Doo-Man Chun
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 985 - 988
-
Material saving and product quality improvement with the visualization of hot runner design in injection molding
Authors (first, second and last of 7)
- Tzu-Chau Chen
- Chao-Tsai Huang
- Lung-Wen Kao
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1109 - 1112
-
Suppressing method of the cross section deformation for extruded square tubes in press bending
Authors
- Kunito Nakajima
- Noah Utsumi
- Masashi Yoshida
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 965 - 970
-
Soundproofing ability and mechanical properties of polypropylene/exfoliated graphite nanoplatelet/carbon nanotube (PP/xGnP/CNT) composite
Authors (first, second and last of 6)
- Myung-Sub Kim
- Jun Yan
- Sung-Hoon Ahn
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1087 - 1092
-
Perspective to green manufacturing and applications
Authors
- Sung-Hoon Ahn
- Doo-Man Chun
- Won-Shik Chu
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 873 - 874
-
Green manufacturing process for helical pinion gear using cold extrusion process
Authors (first, second and last of 7)
- Myeong-Sik Jeong
- Sang-Kon Lee
- Tae-Hoon Choi
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1007 - 1011
-
A nonlinear control of an QZS isolator with flexures based on a lyapunov function
Authors
- Pham Van Trung
- Kyoung-Rock Kim
- Hyeong-Joon Ahn
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 919 - 924
-
Prediction of compressive strength of CFRP composite structures using notch strength
Authors (first, second and last of 4)
- Sang Soo Ahn
- Suk Woo Hong
- Chang Sung Seok
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1103 - 1108
-
Development of electric rust preventive machining method system — safe water using for machining fluid: complete removal of bacteria (Enterobacter aerogenes)-
Authors (first, second and last of 11)
- Naohiro Nishikawa
- Katsuhiko Omoe
- Shinya Tsukamoto
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 897 - 902
-
Interface thermal resistance modeling of the silicon-argon interface
Authors
- BoHung Kim
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1023 - 1028
-
Ultrasonic cleaning of used plastic parts for remanufacturing of multifunctional digital copier
Authors
- Yoonsang Chang
- Jae Heum Bae
- Hwa-Cho Yi
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 951 - 956
-
Experimental study of the dry facing of magnesium pieces based on the surface roughness
Authors (first, second and last of 4)
- Eva Maria Rubio
- Jose Luis Valencia
- Diego Carou
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 995 - 1001
-
On-machine volumetric-error measurement and compensation methods for micro machine tools
Authors
- Shih-Ming Wang
- Ji-Jun Lin
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 989 - 994
-
Optimization of hybrid LED package system for energy saving based on micro machining technology and taguchi method
Authors (first, second and last of 8)
- Eun-chae Jeon
- Tae-Jin Je
- Sang-Kyu Choi
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1113 - 1116
-
Surface hardening of titanium using gas nitriding
Authors
- Masashi Yoshida
- Ryuta Ichiki
- Noah Utsumi
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 971 - 976
-
Advanced T-ray nondestructive evaluation of defects in FRP solid composites
Authors (first, second and last of 6)
- Kwang-Hee Im
- Kil-Sung Lee
- David Kuei Hsu
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1093 - 1098
-
Minimum lubrication technique using silicone oil for friction reduction of stainless steel
Authors
- Shin-Sung Yoo
- Dae-Eun Kim
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 875 - 880
-
Alternative manufacturing process of die carring hook for reducing material loss
Authors (first, second and last of 5)
- Sang-Kon Lee
- Myeong-Sik Jeong
- Yong-Jae Cho
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1013 - 1016
-
Reduction of heat losses for the in-line induction heating system by optimization of thermal insulation
Authors
- Hong-Seok Park
- Xuan-Phuong Dang
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 903 - 909
-
Exhaust air energy recovery system for electrical power generation in future green cities
Authors (first, second and last of 6)
- Wen Tong Chong
- Sin Chew Poh
- Wooi Ping Hew
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1029 - 1035
-
Optimal design of a QZS isolator using flexures for a wide range of payload
Authors
- Kyoung-Rock Kim
- Yo-han You
- Hyeong-Joon Ahn
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 911 - 917
-
Modification and characteristics of biodegradable polymer suitable for selective laser sintering
Authors (first, second and last of 7)
- Pil-Ho Lee
- Eunyoung Chang
- Haseung Chung
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1079 - 1086
-
Prognosis-informed wind farm operation and maintenance for concurrent economic and environmental benefits
Authors (first, second and last of 4)
- Pingfeng Wang
- Prasanna Tamilselvan
- Byeng Dong Youn
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1049 - 1056
-
Heuristic optimization method for cellular structure design of light weight components
Authors
- Jason Nguyen
- Sang-in Park
- David Rosen
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1071 - 1078
-
Electrochemical deposition of metal ions as a low energy alternative to conventional methods
Authors
- Abhimanyu Bhat
- David Bourell
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 881 - 889
-
Power consumption and tool wear assessment when machining titanium alloys
Authors
- Salman Pervaiz
- Ibrahim Deiab
- Basil Darras
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 925 - 936
-
Risk management of hazardous substances in selection of green suppliers
Authors
- Tsai Chi Kuo
- Chih-Hsing Chu
- Content type: OriginalPaper
- Published: 19 June 2013
- Pages: 1057 - 1063