Abstract
Computer Aided Design (CAD), an accepted technology to support design processes, offers efficient techniques to design the technical solution of a product. CAD-systems use computer internal models to store data of the technical solution. Based on computer internal models, product definition data are available for manufacture planning processes, especially for the generation of production schedules and NC-programs. CAD-systems support the generation of these manufacture documents by integrated sofware moduls or interfaces which allow to transfer product definition data to manufacture planning systems. This contribution presents CAD-Systems and their possibilities to support manufacture planning processes by integrated software modules and interface connections.
Preview
Unable to display preview. Download preview PDF.
Literatur
ANSI (American National Standards Institute) Digital Representation of Product Definition Data (Y 14.26M), September 1981
Anderl R., Tröndle K. Modellaustausch, Notwendigkeit für die Integration von CAD/CAM Anwendungen VDI-Z 125 (1983) Nr.4 Februar 1983
Anderl R., Rix J., Wetzel H. GKS im Anwendungsbereich CAO Informatik-Spektrum Nr. 6 Heft 2 April 1983
Bakey T. Economic Benefits and Economic Impact of Interactive Computer-Aided Design Calma, 1981
Borufka H.-G., Kahlmann H.-W., Schönhut J. Normungsarbeiten im Anschluß an GKS Informatik-Spektrum Nr. 6 Heft 2 April 1983
Bolc L. Natural Language Answering Systems Hanser Verlag, 1980
Braid I.C. Geometric Modelling — ten years on G.M.-Seminar, Berlin 1982
Bradford M. Smith, Wellington J. IGES, A Key Interface Specification for CAD/CAM Systems Integration National Bureau of Standards, Januar 1983
Chasen S. Formulation of Systems Cost-Effectivaness in CAD/CAM Handbook, CV, Bedford 1980
Eigner M. Semantische Datenmodelle als Hilfsmittel der Informationshandhabung in CAD-Systemen und deren programmtechnische Realisierung auf Kleinrechnern Dissertation UNI Karlsruhe 1980
Eigner M., Maier H. Einführung und Anwendung von CAD-Systemen Hanser Verlag 1982
Enderle G., Kansy K., Pfaff G., Prester F.-J. Die Funktionen des Graphischen Kernsystems Informatik-Spektrum Nr. 6, Heft 2, April 1983
Encarnacao J., Enderle G. Ein Überblick über die Entwicklung des Graphischen Kernsystems GKS Informatik-Spektrum Nr. 6, Heft 2, April 1983
Encarnacao J., Schlechtendahl E.G. Computer Aided Design Springer Verlag 1983
Esch H., Kohl H.J. CAP/CAM-Systeme — Übersicht und Merkmale, Systemauswahl Industrie-Anzeiger Nr. 88 (1980)
Eversheim W., Fuchs H. Automatische Arbeitsplanerstellung — Anwendung des Systems AUTAP für allgemeine Rotationsteile Industrie-Anzeiger Nr. 7 (1979)
Fuchs H. Automatische Arbeitsplanerstellung. Ein Baustein im Rahmen der integrierten Fertigungsunterlagener-stellung Diss. RWTH Aachen 1981
Fuchs H. Integrierte CAD/CAP/CAM-Systeme als Fernziel Industrie-Anzeiger Nr. 88 (1982)
Grabowski H., Anderl R., Seiler W. DICAD — Ein technisches Modellierungssystem G.M.-Seminar, Berlin 1982
Grayer A.R. Alternative Approaches in Geometric Modelling CAD Vol. 12 No 4, 1980
Grabowski H., Eigner M., Kaiser H. Anforderungen an eine benutzerfreundliche Kommunikationsschnittstelle VDI-Z Nr. 1/2, 1981
N.N. DIN-ISO 7942 Graphisches Kernsystem — Funktionelle Beschreibung 1982
Grabowski H., Maier H., Rausch W. CAD-Seminar Technische Akademie Wuppertal
Grabowski H., Anderl R. Zukünftige Arbeitsweisen in Konstruktion und Arbeitsvorbereitung bei Integration der Arbeitsplanung und NC-Programmierung im CAD-System TZ für Metallbearbeitung Heft 11 (1982)
Grabowsik H., Hettesheimer E. Organisatorische Aspekte bei der Einführung des rechnerunterstützten Konstruierens VDI-Z 1983 (will appear in autumn 1983)
Grabowski H., Anderl R. CAD-Turnkey-Systems Computer & Graphics 1983
Jones P.F. Four Principles of Man-Computer Dialogue Business Press, Bd. Nr. 3, 1978
Kief B. NC Handbuch '81 NC-Handbuch Verlage, Michelstadt-Stockheim
Krause F.L. CAD-Systeme zur Geometrieverarbeitung und Zeichnungserstellung ZWF 75, Bd. 5, 1980
Krause F.L. Leistungsvermögen von CAD-Software für Konstruktion und Arbeitsplanung Industrie-Anzeiger Nr. 77 (1978)
Krause F.L. CAD-Systeme zur Geometrieverarbeitung und Zeichnungserstellung ZWF 75, Bd. 5, 1980
Lewis J. M. Interchanging Spline Curves Using IGES IPC Business Pres Bd. 13 (November 1981) Nr. 6
Liewald M.H., Kennicott Ph.R. Intersystem Data Transfer via IGES IEEE CG A, May 1982
Liewald M.H. The Development and Testing IGES of Interfaces CAMP '83 — Tutorial, März1983
Maier H. Verwaltung von Methoden und ihre Kopplung an ein Werkstückmodellin einem integrierten CAD-System Dissertation UNI Karlsruhe 1982
Müller G., Schuster R. Aspekte der rechnergestützten Konstruktion in Zwf 76, 1981
National Bureau of Standards IGES-Newsletter Bd.2, (März 1982) Nr. 1
Pfaff G. Zertifizierung graphischer Systeme Informatik-Spektrum Nr. 6, Heft 2, April 1983
Rapp H. Durchlaufzeitverkürzung mit CAD/CAM im Werkzeugbau einer Maschinenfabrik Konstruktionsforum, München 1981
Rembold U., Blume Ch., Dillmann R., Mörtel G. Technische Anforderungen an zukünftige Montageroboter Teil 1, VDI-Z (1981) Nr. 4, Februar (II)
Roloff W., Wiessner K.-H. Integrierte Erstellung der Fertigungsunterlagen für Drehteile Industrie-Anzeiger Nr. 88 (1982)
Scott D.J. Computer Aided Graphics Determining System Size, Estimaling Costs and Savings in Proceedings Antofact Wesp., CAD/CAM VIII, Anaheim, 1980, Society of Manufacturing Engineers
Scowen R.S. IGES-A Critical Review and Some Suggestions Report IFIP Working Group on CAD-Systems — Framework Roros Juni 1982
Seiler W. Grundlagen des Rechnereinsatzes bei der Produktentwicklung VDI-Seminarunterlagen zum Seminar CAD/CAM rechnerunterstütztesKonstruieren und Fertigen 1983
VDI-directives 2222, 2210, 2211 VDI 1980
Weissflog U. Experience in Design and Implementation of an IGES Translator CAMP '83 — Vortragsskript 1983
Wessel H.J., Stendel M. Gegenüberstellung von Systemen zur automatischen Arbeitsplanerstellung VDI-Z 122 (1982) Nr. 8
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 1984 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Grabowski, H., Anderl, R. (1984). CAD-systems and their interface with CAM. In: Rembold, U., Dillmann, R. (eds) Methods and Tools for Computer Integrated Manufacturing. CIM 1983. Lecture Notes in Computer Science, vol 168. Springer, Berlin, Heidelberg. https://doi.org/10.1007/BFb0014771
Download citation
DOI: https://doi.org/10.1007/BFb0014771
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-12926-4
Online ISBN: 978-3-540-38845-6
eBook Packages: Springer Book Archive