Abstract
This experimental cum research exploration is focused on the production of artificial aggregates with an adoption of pelletization technique. The influential factors for ascertaining the efficiency of the production process are nature of binding agent, required moisture content, process duration and dosage of alkali binder. Aggregates were produced in various combinations including the industrial by-products replaced partially by mine tailings with the addition of some percentages of lime. These produced aggregates were analysed for their engineering properties. It was observed that with the utilization of these mine tailings in this production of artificial aggregates have given an enhancement in the basic characteristic properties of the produced aggregates which are nearly comparable to that of natural aggregates.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pereira JJ, Abd Hamid Z, Ismail S (2006) Minerals security in construction–issues and challenges for sustainable development
Banerjee A et al (2016) Material consumption patterns in India: a baseline study of the automotive and construction sectors. GIZ, New Delhi
Schandl H et al (2018) Global material flows and resource productivity: forty years of evidence. J Indus Ecol 22(4):827–838
Cement Sustainability Initiative. Technology roadmap: Low-carbon technology for the Indian cement industry. World business council for sustainable development and international energy agency
Fondriest FF, Snyder MJ (1964) Synthetic aggregates for highway construction. NCHRP Report 8
Davies DR, Kitchener JN (1996) Massive use of pulverised fuel ash in concrete for the construction of a UK power station. Waste Manage 16(1–3):169–180
Shayan A, Diggins R, Ivanusec I (1996) Effectiveness of fly ash in preventing deleterious expansion due to alkali-aggregate reaction in normal and steam-cured concrete. Cem Concr Res 26(1):153–164
Ilyushechkin AY et al (2012) IGCC solids disposal and utilisation, final report for ANLEC project 5-0710-0065: 66–76
Priyadharshini P, Mohan Ganesh G, Santhi AS (2011) Experimental study on cold bonded fly ash aggregates. Int J Civil Struct Eng 2(2):507–515
Nagaraj DR (2000) Minerals recovery and processing. Kirk‐OthmerEncyclopedia of Chemical Technology
Harikrishnan KI, Ramamurthy K (2006) Influence of pelletization process on the properties of fly ash aggregates. Waste Manage 26(8):846–852
Bijen JMJM (1986) Manufacturing processes of artificial lightweight aggregates from fly ash. Int J Cem Compos Lightweight Concrete 8(3):191–199
Rangan BV et al (2005) Studies on fly ash-based geopolymer concrete. Proceedings of the world congress geopolymer, Saint Quentin, France. vol 28
Davidovits J (1999) Chemistry of geopolymeric systems, terminology. Geopolymer. 99(292), sn
Hardjito D et al (2004) On the development of fly ash-based geopolymer concrete. Mater J 101(6):467–472
Khale D, Chaudhary R (2007) Mechanism of geopolymerization and factors influencing its development: a review. J Mater Sci 42(3):729–746
Komljenović M, Baščarević Z, Bradić V (2010) Mechanical and microstructural properties of alkali-activated fly ash geopolymers. J Hazard Mater 181(1–3):35–42
Hardjito D, Cheak CC, Ing CHL (2008) Strength and setting times of low calcium fly ash-based geopolymer mortar. Mod Appl Sci 2(4):3–11
Rattanasak U, Chindaprasirt P (2009) Influence of NaOH solution on the synthesis of fly ash geopolymer. Miner Eng 22(12):1073–1078
Al Bakri AMM et al (2012) Effect of Na2SiO3/NaOH Ratios and NaOH molarities on compressive strength of fly-ash-based geopolymer. ACI Mater J 109.5
Görhan G, Kürklü G (2014) The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures. Compos part B: Eng 58:371–377
Patankar SV, Ghugal YM, Jamkar SS (2014) Effect of concentration of sodium hydroxide and degree of heat curing on fly ash-based geopolymer mortar. Indian J Mater Sci 2014
Phoo-ngernkham T et al (2015) Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer. Constr Build Mater 91:1–8
Fernández-Jiménez A, Palomo A (2005) Composition and microstructure of alkali activated fly ash binder: effect of the activator. Cem Conc Res 35(10):1984–1992
Rahim A et al (2014) Effect of solid to liquid ratio on the mechanical and physical properties of fly ash geopolymer without sodium silicate. Applied mechanics and materials. vol 625. Trans Tech Publications Ltd
Rahmiati T et al (2015) Effect of solid/liquid ratio during curing time fly ash based geopolymer on mechanical property. Materials science forum. vol 803. Trans Tech Publications Ltd
Kong DLY, Sanjayan JG, Sagoe-Crentsil K (2007) Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures. Cem Concr Res 37(12):1583–1589
Shinde BH, Kadam KN (2015) Properties of fly ash based geopolymer mortar. Int J Eng Res Technol 4.7
Gomathi P, Sivakumar A (2014) Cold bonded fly ash lightweight aggregate containing different binders. Res J Appl Sci Eng Technol 7(6):1101–1106
Le Anh-tuan B et al (2012) Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete. Constr Build Mater 35:1056–1062
IS 3812—Part 2 (2013) Specification for pulverized fuel ash: For use as admixture in cement mortar and concrete, Bureau of Indian Standards, New Delhi
IS 2386—Part 4 (1963) Methods of test for aggregates for concrete: mechanical properties, bureau of Indian standards, New Delhi
Gomathi P, Sivakumar A (2012) Characterization on the strength properties of pelletized fly ash aggregate. ARPN J Eng Appl Sci 7(11):1523–1532
Shivaprasad KN, Das BB (2017) Influence of alkali binder dosage on the efficiency of pelletization of aggregates from iron ore tailing and fly ash. Int J Eng Res Mechan Civil Eng 2(3):388–392
Acknowledgements
The authors convey their sincere thanks to Kudremukh Iron Ore Company Ltd., (KIOCL), Mangalore, and DST, India for extending all their laboratory facilities and providing the monetary support, respectively, for this research investigation.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sharath, B.P., Das, B.B. (2021). Production of Artificial Aggregates Using Industrial By-Products Admixed with Mine Tailings—A Sustainable Solution. In: Das, B.B., Nanukuttan, S.V., Patnaik, A.K., Panandikar, N.S. (eds) Recent Trends in Civil Engineering. Lecture Notes in Civil Engineering, vol 105. Springer, Singapore. https://doi.org/10.1007/978-981-15-8293-6_33
Download citation
DOI: https://doi.org/10.1007/978-981-15-8293-6_33
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8292-9
Online ISBN: 978-981-15-8293-6
eBook Packages: EngineeringEngineering (R0)