Abstract
In the current industrial scenario, power modules are the most crucial electrical component used by any motor drive. Power modules are exposed to harsh environmental conditions. So, in order to design a reliable and high-quality product, lifetime estimation becomes a necessary task. In this paper, a simplified version of Coffin–Manson law along with rainflow algorithm has been used to develop analytical lifetime estimation method of IGBT modules. Load profile for an application of washing machine is taken into consideration. Direct torque control method of speed control has been used. Practical IGBT module has been electro-thermally modeled using PLECS toolbox. Finally, Palmgren-Miner law is used to sum up all the damages of fatigue cycles, and lifetime of the IGBT module FS150R12KT4 has been predicted.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yang S et al (2011) An industry-based survey of reliability in power electronic converters. IEEE Trans Ind Appl 47(3):1441–1451
Kovacevic IF, Drofenik U, Kolar JW (2010) New physical model for lifetime estimation of power modules. In: 2010 international power electronics conference (IPEC). IEEE
Ma K et al (2015) Complete loss and thermal model of power semiconductors including device rating information. IEEE Trans Power Electron 30(5):2556–2569
Busca C et al (2011) An overview of the reliability prediction related aspects of high power IGBTs in wind power applications. Microelectron Reliab 51(9):1903–1907
Cotton I, Evans K, Wang N (2009) The impact of thermal cycling in humid environments on power electronic modules
Rahimo M et al (2016) The impact on power semiconductor device operation due to local electric field alterations in the planar junction termination. Microelectron Reliab 58:51–57
Nagl B et al (2013) Experimental investigation of transient electrical, thermal and mechanical behavior of IGBT inverter modules during operation. In: 2013 25th international symposium on power semiconductor devices and ICs (ISPSD). IEEE
IGBT. http://www.powerguru.org/reliable-igbt-power-semiconductor-modules-for-hybrid-electrical-vehicles. Accessed 9 December 2017
Hauenstein H (2007) Low inductance bond-wireless co-package for high power density devices, especially for IGBTs and diodes. U.S. Patent No. 20070241393A1, 11 April 2007
Sze SM, Ng KK (2006) Physics of semiconductor devices. Wiley
Aapplication Note. https://www.infineon.com/cms/en/product/power/igbt/igbt-modules/igbt-modules-up-to-1200v/fs150r12kt4g/. Accessed 9 December 2017
Musallam M et al (2015) Mission profile-based reliability design and real-time life consumption estimation in power electronics. IEEE Trans Power Electron 30(5):2601–2613
ASTM Committee (2005) Standard practices for cycle counting in fatigue analysis. ASTM International, West Conshohocken
Wang Q, Chung Y (eds) (2013) Encyclopedia of tribology. Springer, New York
Due J, Munk-Nielsen S, Nielsen R (2011) Lifetime investigation of high power IGBT modules. In: Proceedings of the 2011—14th European conference on power electronics and applications (EPE 2011). IEEE
Niesłony A (2009) Determination of fragments of multiaxial service loading strongly influencing the fatigue of machine components. Mech Syst Sig Proc 23(8):2712–2721
Obulesu YP, Kumar MV (2007) Design and simulation of direct torque control of induction motor drive using Matlab/Simulink. Int J Power Energ Syst 27(2):145
Murthy K, Bedford R (1978) Transformation between Foster and Cauer equivalent networks. IEEE Trans Circ Syst 25(4):238–239
Thermal model. http://www.hitachi-power-semiconductor-device.co.jp/en/product/igbt/pdf/thermal_model.pdf. Accessed 9 December 2017
McInnes CH, Meehan PA (2008) Equivalence of four-point and three-point rainflow cycle counting algorithms. Int J Fatigue 30(3):547–559
Welte TM, Wang K (2014) Models for lifetime estimation: an overview with focus on applications to wind turbines. Adv Manuf 2(1):79–87
Cooke R (1991) Experts in uncertainty: opinion and subjective probability in science. Oxford University Press on Demand
Kerscher WJIII et al (2003) PREDICT: a case study, using fuzzy logic. In: Annual reliability and maintainability symposium, 2003. IEEE
Dragomir OE et al (2007) Framework for a distributed and hybrid prognostic system. IFAC Proc Vol 40(18):431–436
Acknowledgements
The authors would like to thank Danfoss Industries for the valuable data and support provided for successful completion of this paper.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Das, A., Pai, S., Shanmugam, P., Indragandhi, V. (2021). Lifetime Estimation of Insulated Gate Bipolar Transistor Modules Used for Industrial Application. In: Komanapalli, V.L.N., Sivakumaran, N., Hampannavar, S. (eds) Advances in Automation, Signal Processing, Instrumentation, and Control. i-CASIC 2020. Lecture Notes in Electrical Engineering, vol 700. Springer, Singapore. https://doi.org/10.1007/978-981-15-8221-9_6
Download citation
DOI: https://doi.org/10.1007/978-981-15-8221-9_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8220-2
Online ISBN: 978-981-15-8221-9
eBook Packages: EngineeringEngineering (R0)