Abstract
The current computation models for gear contact analysis and wear prediction are mostly based on finite element analysis which consumes a lot of time and effort. In this paper, an alternate model to spur gear contact analysis is developed using linear complementarity. A linear complementarity solver computes the contact forces between meshing teeth along the path of contact. From the contact forces, sliding wear in gear tooth is predicted. Archard’s wear model is used for the wear prediction. The results of linear complementarity and finite element model are compared for both contact forces and sliding wear. For identical meshing gear pair, the linear complementarity model consumes much less computation time than the finite element model.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ambarisha V, Parker R (2017) Nonlinear dynamics of planetary gears using analytical and finite element models. J Sound Vib 302:577–595
Thirumurugan R, Muthuveerappan G (2010) Maximum fillet stress analysis based on load sharing in normal contact ratio spur gear drives. Mech Based Des Struct Machines 38:204–226
Cottle R, Pang J, Stone R (1992) The linear complementarity problem. Soc Ind Appl Math
Stewart D (2000) Rigid-body dynamics with friction and impact. Soc Ind Appl Math Rev 42:3–39
Flodin A, Andersson S (1997) Simulation of mild wear in spur gears. Wear 207:16–23
Lotstedt P (1984) Numerical simulation of time-dependent contact and friction problems in rigid body mechanics. SIAM J Sci Stat Comput 5:370–393
Baraff D (1994) Fast contact force computation for non-penetrating rigid bodies. In: computer graphics proceedings, annual conference series, pp 23–34
Stewart D, Trinkle J (1996) An implicit time-stepping scheme for rigid body dynamics with inelastic collisions and coulomb friction. Int J Numer Meth Eng 39:2673–2691
Anitescu M, Potra F (1997) Formulating dynamic multi-rigid-body contact problems with friction as solvable linear complementarity problems. Nonlinear Dyn 14:231–247
Ku P (1974) Tribology of gears and splines. Proceedings tribology workshop, pp 402–427
Ku P (1975) Gear failure modes—importance of lubrication and mechanics. ASLE Trans 19:239–249
Dudley D (1980) Gear wear. In: Peterson MB, Winer WO (eds), ASME wear control handbook, pp 755–830
Wu S, Cheng H (1993) Sliding wear calculation in spur gears. J Tribol 115:493–500
Wu S, Cheng H (1991) A sliding wear model for partial-ehl contacts. J Tribol 113:134–141
Brauer J, Andersson S (2003) Simulation of wear in gears with flank interferencea mixed fe and analytical approach. Wear 254:1216–1232
Bajpai P, Kahraman A, Anderson N (2004) A surface wear prediction methodology for parallel-axis gear pairs. J Tribol 126:597–605
Yuksel C, Kahraman A (2004) Dynamic tooth loads of planetary gear sets having tooth profile wear. Mech Mach Theory 39:695–715
Park D, Kahraman A (2009) A surface wear model for hypoid gear pairs. Wear 267:1595–1604
Hwang S, Lee J, Lee D, Han S, Lee K (2013) Contact stress analysis for a pair of mating gears. Math Comput Model 57:40–49
Buckingham E (1963) Analytical mechanics of gears. Dover Publication, New York
Lloyd J (2005) Fast implementation of lemkes algorithm for rigid body contact simulation. In: Proceedings of the 2005 IEEE international conference on robotics and automation, pp 4538–4543
Howard I, Jia S, Wang J (2001) The dynamic modelling of a spur gear in mesh including friction and a crack. Mech Syst Sig Process 15:831–853
Dirkse S, Ferris M (1995) The path solver: a non-monotone stabilization scheme for mixed complementarity problems. Optim Meth Softw 5:123–156
Maitra G (1994) Handbook of gear design. Tata McGraw-Hill Publication, New Delhi
Stolarski T, Nakasone Y, Yoshimoto S (2006) Engineering analysis with ANSYS software. Butterworth-Heinemann
Song P, Pang J, Kumar V (2004) A semi-implicit time-stepping model for frictional compliant contact problems. Int J Numer Meth Eng 60:2231–2261
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Pathak, M., Gautam, M., Rakshit, S. (2021). Contact Analysis of a Gear Pair Using Linear Complementarity. In: Sen, D., Mohan, S., Ananthasuresh, G. (eds) Mechanism and Machine Science. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4477-4_17
Download citation
DOI: https://doi.org/10.1007/978-981-15-4477-4_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-4476-7
Online ISBN: 978-981-15-4477-4
eBook Packages: EngineeringEngineering (R0)