Abstract
The inspiration and the knowledge needed to develop the spinning techniques used for fibre manufacture were provided by the spider and the silkworm. These creatures showed that the following steps were required for extruding thin continuous filaments: (1) acquisition of spinnable liquid, (2) jet formation, and (3) jet hardening. Add to this bobbin winding, and we get manufactured fibres in the spun state. The manufactured fibres may need further drawing so that they have adequate properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Mateev, A.N. (1985) Molecular Physics, Mir Publishers, Moscow, p. 18.
Kauzmann, W. and Eyring, H. (1940) J. Am. Chem. Soc., 62, 3113.
Flory, P.J. (1940) J. Am. Chem. Soc., 62, 1057.
Rosen, M.R. (1979) Polym. Plast. Technol. Eng., 12(1), 1–42.
Bagley, E.B. (1957) J. Appl. Phys., 28, 626.
Williams, M.L., Landel, R.F. and Ferry, J.D. (1955) J. Am. Chem. Soc., 77, 3701.
Atkinson, E.B. (1965) Molten polymers and concentrated polymer solutions, in Physics of Plastics (ed. P.D. Ritchie), Plastics Institute (Illife Books Ltd, London and D. Van Nostrand Co., Princeton), pp. 248–284.
Doolittle, A.K. (1951) J. Appl. Phys., 22, 1471.
Treloar, L.R.G. (1970) Introduction to Polymer Science, Wykeham Publication Ltd, London, p. 173.
Elias, Hans-Georg (1984) Macromolecules-I: Structure and Properties, 2nd edn, Plenum Press, New York.
Howells, E.R. and Benbow, J.J. (1962) Trans. Plastics, 30, 240.
Brydson, J.A. (1970) Flow Properties of Polymer Melts, Plastics Institute, Iliffe Books, London, p. 59.
Westover, R.F. (1966) Polym Eng. Sci., 6, 83.
Billmeyer, Jr, Fred W. (1971) Textbook of Polymer Science, 2nd edn, John Wiley & Sons Inc., New York, p. 187.
Dealy, John M. (1982) Rheometers for Molten Plastics, Van Nostrand Reinhold Co., New York.
Petrie, C.J.S. (1979) Elongational Flows, Pitman, London.
Ziabicki, A. (1959) J. Appl. Polym. Sci., 2, 24–31.
Ziabicki, A. (1976) Fundamentals of Fibre Formation. The Science of Fibre Spinning and Drawing, Wiley-Interscience, London.
Trouton, F. (1906) Proc. Roy. Soc.,A77, 426.
Lodge, A. (1964) Elastic Liquids, Academic Press, New York.
Vinogradov, G.V., Fikhman, V.D., Radushkevich, B.V. and Ya Malkin, A. (1970) J. Polym. Sci., A28 657.
Münstedt, H. and Luan, H.M. (1978) Rheol. Acta,17, 415.
Vinogradov, G.V., Dreval, V.E., Borisenkova, E.K., Burbanaliev, M.K. and Shalganova, V.G. (1981) Rheol. Acta,20 433.
Ishizuka, O. and Koyama, K. (1985) In High Speed Fibre Spinning (eds A. Ziabicki and H. Kawai), John Wiley & Sons, New York.
Ziabicki, A. (1985) In High Speed Fibre Spinning (eds A. Ziabicki and H. Kawai), John Wiley & Sons, New York.
Meissner, J. (1969) Rheol. Acta,8, 78.
Meissner, J. (1971) Rheol. Acta,10. 230.
Glasstone, S., Laidler, K.J. and Eyring, H. (1941) Theory of Rate Processes, McGraw Hill, New York.
Rouse, Jr, P.E. (1953) J. Chem. Phys., 21 1272.
de Gennes, P.G. (1971) J. Chem. Phys., 55 572.
Doi, M. and Edwards, S.F. (1978) J. Chem. Soc. Faraday Trans II, 74, 1789, 1802, 1818.
Curtiss, C.F. and Bird, R.B. (1981) J. Chem. Phys., 74, 2016, 2026.
Meares, P. (1985) Polymers: Structure and Bulk Properties, D. Van Nostrand Co., London.
Bueche, F. (1954) J. Chem. Phys., 22, 603.
Yamamoto, M. (1956) J. Phys. Soc. Japan, 11, 413; Idem (1957) ibid. 12, 1148; Idem (1958) ibid. 13, 1200.
Nitschmann, H. and Schrade, J. (1948) Heiv. Chim. Acta, 31, 297.
Walczak, Z.K. (1977) Formation of Synthetic Fibres, Gordon and Breach, Science Publishers, London.
. Kast, W. (1963) Kolloid-Z, 187 89.
Ziabicki, A. (1967) In Man-made Fibers: Science and Technology, Vol. I (eds H.F. Mark, S.M. Atlas and E. Cernia), Interscience, New York.
Cao, Jinan (1991) J. Appl. Polym. Sci., 42 143.
Han, C.D., Lamonte, R.R. and Shah, Y.T. (1972) J. Appl. Polym. Sci., 16, 3307.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Gupta, V.B., Bhuvanesh, Y.C. (1997). Basic principles of fluid flow during fibre spinning. In: Gupta, V.B., Kothari, V.K. (eds) Manufactured Fibre Technology. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-5854-1_3
Download citation
DOI: https://doi.org/10.1007/978-94-011-5854-1_3
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-6473-6
Online ISBN: 978-94-011-5854-1
eBook Packages: Springer Book Archive