Abstract
The finite strip method (FSM) is an effective procedure for the numerical analysis of single rectangular plates and of complicated prismatic plate structures. Figure 4.1 shows examples of such plates and plate structures, each modelled by a number of finite strips which run the whole length of the structure. The finite strips are rigidly joined at longitudinal reference lines at which the requisite compatibility conditions should be satisfied. With regard to Figure 4.1 it should be noted, though, that finite strips may well have reference lines (i.e. lines with which degrees of freedom are associated) in their interior, in addition to at their exterior longitudinal edges, and that in some types of analysis the length of the strips which is considered for analysis purposes is less than the full length of the structure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Wittrick, W. H. (1968) A unified approach to the initial buckling of stiffened panels in compression. Aeronautical Quarterly, 12, 265–83.
Wittrick, W. H. (1968) General sinusoidal stiffness matrices for buckling and vibration analysis of thin flat-walled structures. International Journal of Mechanical Sciences, 10, 946–66.
Wittrick, W. H. and Williams, F. W. (1974) Buckling and vibration of anisotropic or isotropic plate assemblies under combined loadings. International Journal of Mechanical Sciences, 16, 209–39.
Smith, C. S. (1968) Bending, buckling and vibration of orthotropic plate-beam structures. Journal of Ship Research, 12, 249–68.
Viswanathan, A. V., Soong, T. C. and Miller, R. E. (1973) Comprehensive buckling analysis and design of stiffened flat plates with multi-layered composite reinforcement. Computers and Structures, 3, 281–97.
Viswanathan, A. V., Tamekuni, M. and Baker, C. C. (1974) Elastic stability of laminated flat and curved, long rectangular plates subjected to combined in-plane loads. NASA CR-2330.
Cheung, Y. K. (1976) Finite Strip Method in Structural Analysis, Pergamon, Oxford.
Loo, Y. C. and Cusens, A. C. (1978) The Finite Strip Method in Bridge Engineering. Viewpoint Publications, Cement and Concrete Association, Slough.
Cheung, Y. K. and Cheung, M. S. (1971) Flexural vibrations of rectangular and other polygonal plates. Proc. ASCE, Journal of the Engineering Mechanics Division, 97, 391–411.
Babu, P. V. T. and Reddy, D. V. (1974) Frequency analysis of skew orthotropic plates by the finite strip method. Journal of Sound and Vibration, 18,465–74.
Cheung, M. S. and Cheung, Y. K. (1971) Natural vibrations of thin flat-walled structures with different boundary conditions. Journal of Sound and Vibration, 18, 325–37.
Turvey, G. J. and Wittrick, W. H. (1973) The influence of orthotropy on the stability of some multi-plate structures in compression. Aeronautical Quarterly, 24, 1–8.
Przemieniecki, J. S. (1973) Finite element structural analysis of local instability. AIAA Journal, 11, 33–9.
Plank, R. J. and Wittrick, W. H. (1974) Buckling under combined loading of thin, flat-walled structures by a complex finite strip method. International Journal for Numerical Methods in Engineering, 8, 323–39.
Dawe, D. J. (1977) Finite strip buckling analysis of curved plate assemblies under biaxial loading. International Journal of Solids and Structures, 13, 1141–55.
Graves-Smith, T. R. and Sridharan, S. (1978) A finite strip method for the buckling of plate structures under arbitrary loading. International Journal of Mechanical Sciences, 20, 685–93.
Morris, I. R. and Dawe, D. J. (1980) Free vibration of curved-plate assemblies with diaphragm ends. Journal of Sound and Vibration, 73, 1–17.
Mohd, S. and Dawe D. J. (1993) Buckling and vibration of thin laminated composite, prismatic shell structures. Composite Structures, 25, 353–62.
Benson, P. R. and Hinton, E. (1976) A thick finite strip solution for static, free vibration and stability problems. International Journal for Numerical Methods in Engineering, 10, 665–78.
Hinton, E. (1978) Buckling of initially stressed Mindlin plates using a finite strip method. Computers and Structures, 8, 99–105.
Dawe, D. J. (1978) Finite strip models for vibration of Mindlin plates. Journal of Sound and Vibration, 59, 441–52.
Roufaeil, O. L. and Dawe, D. J. (1980) Vibration analysis of rectangular Mindlin plates by the finite strip method. Computers and Structures, 12, 833–42.
Dawe, D. J. and Roufaeil, O. L. (1982) Buckling of rectangular Mindlin plates. Computers and Structures, 15, 461–71.
Craig, T. J. and Dawe, D. J. (1983) A study of the buckling of some rectangular CFRP plates, in Composite Structures-2., (ed. I. H. Marshall), Elsevier, London, pp. 414-27.
Dawe, D. J. and Craig, T. J. (1985) The influence of shear deformation on the natural frequencies of laminated rectangular plates, in Composite Structures-3, (ed. I. H. Marshall), Elsevier, London, pp. 660–76.
Dawe, D. J. (1985) Buckling and vibration of plate structures including shear deformation and related effects, in Aspects of the Analysis of Plate Structures, (eds D. J. Dawe, R. W. Horsington, A. G. Kamtekar and G. H. Little) Clarendon Press, Oxford, pp. 73–99.
Dawe, D. J. and Craig, T. J. (1986) The vibration and stability of symmetrically-laminated composite rectangular plates subjected to in-plane stress. Composite Structures, 5, 281–307.
Craig, T.J. and Dawe, D.J. (1986) Flexural vibration of symmetrically laminated, composite, rectangular plates including transverse shear effects. International Journal of Solids and Structures, 22,155–69.
Dawe, D. J. (1986) The analysis of shear-deformable plates using finite strip elements, in Finite Element Methods for Plate and Shell Structures, vol 2: Formulations and Algorithms, (eds T. J. R. Hughes and E. Hinton) Pineridge Press, Swansea, pp. 102–26.
Craig, T. J. and Dawe, D. J. (1987) Vibration of shear deformable laminated plate structures by the finite strip method. Computers and Structures, 27, 61–72.
Dawe, D. J. and Craig, T. J. (1988) Buckling and vibration of shear deformable prismatic plate structures by a complex finite strip method. International Journal of Mechanical Sciences, 30, 77–99.
Dawe, D.J. and Peshkam, V. (1990) Buckling and vibration of long plate structures by complex finite strip methods. International Journal of Mechanical Sciences, 32, 743–66.
Dawe, D. J. and Peshkam, V. (1989) Buckling and vibration of finite-length composite prismatic plate structures with diaphragm ends, part I: finite strip formulation. Computer Methods in Applied Mechanics and Engineering, 77,1–30.
Peshkam, V. and Dawe, D. J. (1989) Buckling and vibration of finite-length composite prismatic plate structures with diaphragm ends, part II: computer programs and buckling applications. Computer Methods in Applied Mechanics and Engineering, 77, 227–52.
Dawe, D. J. (1988) Buckling and vibration of composite prismatic plate assemblies with shear deformation effects included. Final report to Royal Aerospace Establishment, Farnborough, under Agreement Number 2027/0155.
Peshkam, V. and Dawe, D. J. (1989) Buckling and vibration analysis of composite prismatic plate structures, in Composite Structures-5, (ed. I. H. Marshall) Elsevier, London, pp. 467–85.
Dawe, D. J. and Peshkam, V. (1990) A buckling analysis capability for use in the design of composite prismatic plate structures, in Optimum Design of Composite Structures, (eds I. H. Marshall and E. Demuts) Elsevier, London, pp. 33–63. (Also reprinted in Composite Structures, 16, (1990) 33–63).
Mohd, S. (1990) Vibration and buckling analysis of laminated plate and shell structures by thin and shear deformable curved finite strips, PhD Thesis, The University of Birmingham.
Mohd, S. and Dawe, D. J. (1993) Finite strip vibration analysis of composite prismatic shell structures with diaphragm ends. Computers and Structures, 49, 753–65.
Cheung, Y. K. and Fan S. C. (1983) Static analysis of right box girder bridges by spline finite strip method. Proceedings of the Institute of Civil Engineers, 75, 311–23.
Fan, S. C. and Cheung, Y. K. (1984) Flexural free vibration of rectangular plates with complex support conditions. Journal of Sound and Vibration, 93, 81–94.
Lau, S. C. and Hancock, G. J. (1986) Buckling of thin flat-walled structures by a spline finite strip method. Thin-walled Structures, 4, 265–94.
Wang, S. and Dawe, D. J. (1987) The use of spline functions in calculating the natural frequencies of anisotropic rectangular laminates, in Composite Structures-4, (ed. I. H. Marshall) Elsevier, London, pp. 1.447–1.460.
Wang, S. (1990) The use of spline functions in the analysis of composite laminated plates, PhD Thesis, The University of Birmingham.
Dawe, D. J. and Wang, S. (1992) Buckling and vibration of composite prismatic plate structures using a spline finite strip approach. Report to Defence Research Agency, December.
Dawe, D. J. and Wang, S. (1992) Vibration of shear-deformable beams using a spline-function approach. International Journal for Numerical Methods in Engineering, 33, 819–44.
Wang, S. and Dawe, D. J. (1993) Vibration of shear-deformable rectangular plates using a spline-function Rayleigh-Ritz approach. International Journal for Numerical Methods in Engineering, 36, 695–711.
Dawe, D. J. and Wang, S. (1993) Free vibration of generally-laminated shear-deformable, composite rectangular plates using a spline Rayleigh-Ritz method. Composite Structures, 25, 77–87.
Reissner, E. (1945) The effect of transverse shear deformation on the bending of elastic plates. Journal of Applied Mechanics, 12, 69–77.
Mindlin, R. D. (1951) Influence of rotary inertia and shear on flexural motion of isotropic elastic plates. Journal of Applied Mechanics, 18, 31–8.
Yang, P. C., Norris, C. H. and Stavsky, Y. (1966) Elastic wave propagation in heterogeneous plates. International Journal of Solids and Structures, 2, 665–84.
Whitney, J. M. and Pagano, N. J. (1970) Shear deformation in heterogeneous anisotropic plates. Journal of Applied Mechanics, 37,1031–6.
Wittrick, W. H. and Williams, F. W. (1971) A general algorithm for computing natural frequencies of elastic structures. Quarterly Journal of Mechanics and Applied Mathematics, 24, 263–84.
Prenter, P. M. (1975) Splines and Variational Methods, Wiley, New York.
de Boor, P. C. (1978) A Practical Guide to Splines, Springer-Verlag, New York.
Whitney, J. M. (1973) Shear correction factors for orthotropic laminates under static load. Journal of Applied Mechanics, 40, 302–4.
Timoshenko, S. P. and Gere, J. (1961) Theory of Elastic Stability 2nd edn, McGraw-Hill, New York.
Jones, R. M. (1973) Buckling and vibration of unsymmetrically laminated cross-ply rectangular plates. AIAA Journal, 11,1626–32.
Whitney, J. M. (1987) Structural Analysis of Laminated Anisotropic Plates, Technomic, Lancaster, PA.
Graves-Smith, T. R. and Sridharan, S. (1978) A finite strip method for the post-locally-buckled analysis of plate structures. International Journal of Mechanical Sciences, 20, 833–42.
Sridharan, S. and Graves-Smith, T. R. (1981) Post-buckling analyses with finite strips. Journal of the Engineering Mechanics Division of ASCE, 107, 869–88.
Hancock, G. J. (1981) Nonlinear analysis of thin sections in compression. Journal of the Structural Engineering Division of ASCE, 107, 455–71.
Azizian, Z. G. and Dawe, D. J. (1985) Geometrically nonlinear analysis of rectangular Mindlin plates using the finite strip method. Computers and Structures, 21,423–36.
Dawe, D. J. and Azizian, Z. G. (1986) The performance of Mindlin plate finite strips in geometrically nonlinear analysis. Computers and Structures, 23,1–14.
Azizian, Z. G. and Dawe, D. J. (1985) Analysis of the large deflection behaviour of laminated composite plates using the finite strip method, in Composite Structures-3, (ed. I. H. Marshall) Elsevier, London, pp. 677–91.
Dawe, D. J. and Azizian, Z. G. (1987) Post-buckled stiffness of rectangular orthotropic composite laminates, in Composite Structures-4 (ed. I. H. Marshall) Elsevier, London, pp. 1.138–1.151.
Dawe, D. J., Lam, S. S. E. and Azizian, Z. G. (1992) Nonlinear finite strip analysis of rectangular laminates under end shortening, using classical plate theory. International Journal for Numerical Methods in Engineering, 35,1087–110.
Lam, S. S. E., Dawe, D. J. and Azizian, Z. G. (1993) Nonlinear analysis of rectangular laminates under end shortening, using shear deformation plate theory. International Journal for Numerical Methods in Engineering, 36,1045–64.
Dawe, D. J. and Lam, S. S. E. (1992) Analysis of the post-buckling behaviour of rectangular laminates. Proc. 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 1, 219–29.
Dawe, D. J. (1992) The prediction of the nonlinear behaviour of rectangular plates and prismatic plate assemblies. Final Report for Procurement Executive Ministry of Defence/Department of Trade and Industry under Agreement No. 2027/184.
Dawe, D. J., Lam, S. S. E. and Azizian, Z. G. (1993) Finite strip post-local-buckling analysis of composite prismatic plate structures. Computers and Structures, 48,1011–23.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Dawe, D.J. (1995). Finite strip buckling and postbuckling analysis. In: Turvey, G.J., Marshall, I.H. (eds) Buckling and Postbuckling of Composite Plates. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1228-4_4
Download citation
DOI: https://doi.org/10.1007/978-94-011-1228-4_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-4537-7
Online ISBN: 978-94-011-1228-4
eBook Packages: Springer Book Archive