Abstract
The primary objective of the work is to effectively conduct the stress analysis of a laminated composite beam having rectangular sections. An analytical expression is used to calculate stress at each ply considering both narrow- and wide-beam assumption. The material for composite rectangular beam is AS4/3501–6 carbon/epoxy. Three types of lay-ups, chosen for the synthesis, are described collectively for both narrow- and wide-beam criterion. Beam taken here is simply a supported type along with uniformly distributed load, which is kept same for all cases.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Agrawal BD, Broutman LJ (2006) Analysis and performance of fiber composites, 2nd edn. Wiley, New Jersey
Soden PD (1998) Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates. Compos Sci Technol 58:1011–1022
Swanson SR (1997) Introduction to design and analysis with advanced composite materials. Prentice Hall, New Jersey
Swanson SR (2001) Anticlastic effects and the transition from narrow to wide behavior in orthotropic beams. Compos Struct 53:449–455
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer India
About this paper
Cite this paper
Srivastava, A.K., Kumar, A. (2014). Comparative Study of Laminated Composite Beam Using Narrow- and Wide-Beam Criterion. In: Khangura, S., Singh, P., Singh, H., Brar, G. (eds) Proceedings of the International Conference on Research and Innovations in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-1859-3_1
Download citation
DOI: https://doi.org/10.1007/978-81-322-1859-3_1
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-1858-6
Online ISBN: 978-81-322-1859-3
eBook Packages: EngineeringEngineering (R0)