Skip to main content
SpringerLink
Log in

Zuverlässigkeitsanalysen in der Entwicklungsphase

  • Chapter
Qualität und Zuverlässigkeit technischer Systeme

  • 113 Accesses

Zusammenfassung

Zuverlässigkeitsanalysen in der Entwicklungsphase dienen in erster Linie der rechtzeitigen Erkennung und Beseitigung von Schwachstellen und der Durchführung von Vergleichsstudien. Sie umfassen die Berechnung der vorausgesagten Zuverlässigkeit (Ausfallraten-analyse), die systematische Untersuchung der Art und Auswirkung von Fehlern und Ausfällen (Ausfallartenanalyse) und die Überprüfung der Erfüllung von Entwicklungs- und Konstruktionsrichtlinien bezüglich Zuverlässigkeit. In diesem Kapitel werden die Möglichkeiten und Grenzen der Berechnung der vorausgesagten Zuverlässigkeit sowie der Analyse der Art und Auswirkung von Ausfällen für elektronische (und elektromechanische) Geräte und Anlagen eingehend behandelt. Auf Entwicklungs- und Konstruktionsrichtlinien bezüglich Zuverlässigkeit wird im Abschnitt 3.4 eingegangen. Für mechanische Betrachtungseinheiten werden die wichtigsten Untersuchungsmethoden vorgestellt. Die mathematischen Grundlagen zu diesen Ausführungen sind im Anhang A6 gegeben.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 54.99
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literatur

Zuverlässigkeitstechnik

  1. Berhard J.: Maßnahmen und Ergebnisse in elektronischen Geräten für die Textilindustrie. SAQ-Fachtagung, Zürich 6.9.1984. Bern: SAQ, 1984, S. 17–33.

    Google Scholar 

  2. Billinton R., Allan R.N.: Reliability Evaluation of Engineering Systems. Boston a.o.: Pitman, 1983.

    Book  Google Scholar 

  3. Birolini A.: Zuverlässigkeit von Schaltungen und Systemen. Autographie zur Vorlesung an der ETH Zürich, 1982, 4.Aufl.; Zuverlässigkeitstechnik. Fortbildungskurs an der Universität Neuchâtel, 1979; Zuverlässigkeitssicherung bei der Entwicklung von Geräten und Systemen. Nachrichtentechnisches Kolloquium 1983/84 der Universität Bern, Bern: H. Lang Verlag, 1984, S. 11–31, 43–59, 75–85, 99–108, 131–143; Methoden der Zuverlässigkeitssicherung technischer Geräte und Systeme. QZ 29 (1984) 3, S. 83–88.

    Google Scholar 

  4. Bobbio A. a.o.: A Markov approach to wear-out modelling. Microel. and Rel. 23 (1983), pp. 113–119.

    Article  Google Scholar 

  5. Carrada E.: L’ affidabilità per l’ elettronica. Roma: La Goliardica, 1975.

    Google Scholar 

  6. Dhillon B.S.: Human Reliability. New York a.o.: Pergamon, 1986.

    Google Scholar 

  7. Endrenyi J.: Reliability Modeling in Electric Power Systems. New York a.o.: Wiley, 1978.

    Google Scholar 

  8. Federici F., Turconi G.: Component failure rates - field experience versus laboratory tests and existing models. Rel. Technology — Theory and Appl., ed. by Moltoft J. and Jensen F., Elsevier Sc. Publ. ( North-Holland ), 1986, pp. 39–44.

    Google Scholar 

  9. Fischer K.: Zuverlässigkeits- und Instandhaltungstheorie. Berlin: Transpress VEB-Verlag, 1984.

    Google Scholar 

  10. Hallberg Ö.: Failure-rate as a function of time due to log-normal life distribution(s) of weak parts. Microel. and Rel. 16 (1977), pp. 155–158.

    Google Scholar 

  11. Harris A.P.: Reliability in the dormant condition. Microel. and Rel. 20 (1980), pp. 33–44.

    Article  Google Scholar 

  12. Herr E.A. a.o.: Reliability evaluation and prediction for discrete semiconductors. IEEE Trans. Rel. 29 (1980) 3, pp. 208–216.

    Article  Google Scholar 

  13. Kececioglu D.: Reliability Engineering. Tucson (AZ): University of Arizona, 1982.

    Google Scholar 

  14. Klaassen K.B.: Active redundancy in analogue electronic systems. Proc. Ann. Rel. and Maint. Symp., 1975, pp. 573–578.

    Google Scholar 

  15. Kochs H.-D.: Zuverlässigkeit elektrotechnischer Anlagen. Berlin u.a.: Springer Verlag, 1984.

    Book  Google Scholar 

  16. Kozlov B.A., Uschakov I.A.: Reliability Handbook. New York a.o.: Holt, Rinehart & Winston, 1970. (Berlin: Akademie-Verlag, 1972, 2nd. Ed. In German)

    Google Scholar 

  17. Lelièvre A.: Analyse stat. de la fiabilité des composants utilisés dans les télécommunications. L’ Eco des Recherches, 128 (1987) 2, pp. 53–62.

    Google Scholar 

  18. Livesay B.R. a.o.: Reliability factors for electronic components in a storage environment, 1977, NTIS (AD/AO51151).

    Google Scholar 

  19. Lunsdorf J.D., Berk J.H., Niscon D.E.: Warranting conventional Munitions. Proc. Ann. Rel. and Maint. Symp., 1986, pp. 443–448.

    Google Scholar 

  20. Malcolm J.C.: R and M 2000 action–plan for tactical missiles. Proc. Ann. Rel. and Maint. Symp., 1988, pp. 86–92.

    Google Scholar 

  21. Mayer J.: Die Zuverlässigkeit von Systemen. Zürich: Siemens-Albis, 1975.

    Google Scholar 

  22. Merren G.T.: Dormant storage reliability assessments–Data based. IEEE Trans. Comp. Hybrids and Man. Techn., 4 (1981) 4, pp. 446–454.

    Article  Google Scholar 

  23. Messerschmitt-Bölkow-Blohm (Hgb.): Technische Zuverlässigkeit. Berlin u.a.: Springer-Verlag, 1986, 3. Aufl.

    Google Scholar 

  24. MIL-HDBK-338: Electronic reliability design handbook. 1984.

    Google Scholar 

  25. Moltoft J.: Behind the “Bathtub”-curve. A new model and its consequences. Microel. and Rel. 23 (1983) 3, pp. 489–500.

    Google Scholar 

  26. Morrison G.N a.o.: RADC Thermal guide for reliability engineering. RADC-TR-82–172, 1982, NTIS (AD/Al 18839).

    Google Scholar 

  27. NASA CR -1126/1129: Practical reliability, Vol. 1: Parameter variation analysis. 1968; Vol. 4: Prediction. 1968.

    Google Scholar 

  28. O’Connor D.T.: Practical Reliability Engineering. New York a.o.: Wiley, 1981.

    Google Scholar 

  29. Preuss H.: Zuverlässigkeit elektronischer Einrichtungen. Berlin: VEB-Verlag Technik, 1976.

    Google Scholar 

  30. Schaefer E.: Zuverlässigkeit, Verfügbarkeit und Sicherheit in der Elektronik. Würzburg: Vogel, 1979.

    Google Scholar 

  31. Schaffner A. u.a.: Probleme der Entstörung und Störsicherheit elektronischer Baugruppen und Systeme. Karlsruhe: H. Schaffner, 1981.

    Google Scholar 

  32. Schwob M., Peyrache G.: Traité de fiabilité. Paris: Masson, 1969.

    Google Scholar 

  33. Shooman M.L.: Probabilistic Reliability - an Engineering Approach. New York a.o.: McGraw-Hill, 1968.

    Google Scholar 

  34. Siewiorek D.P., Swarz R.S.: The Theory and Practice of Reliable System Design. Bedford MA: Digital Press, 1982.

    Google Scholar 

Ausfallrate elektronischer Bauteile

  1. VDI 4005 Bl. 1: Einflüsse von Umweltbedingungen auf die Zuverlässigkeit technischer Erzeugnisse - Grundlagen, 1981; Bl. 2: Mechanische Einflüsse, 1983; Bl. 3: Thermisch-klimatische Einflüsse, 1983; Bl. 4: Chemisch-biologische Einflüsse, 1983; Bl. 5: Elektromagnetische Einflüsse, 1983.

    Google Scholar 

  2. AFCIQ: Données de fiabilité en stockage des composants électroniques. 1983.

    Google Scholar 

  3. Bell Comm. Research: Reliability prediction procedure for electronic equipment. TR-TSY000 332. Morristown NJ: Bell, 1985.

    Google Scholar 

  4. British Telecom: Handbook of reliability data. HRD4. Birmingham GB: British Telecom, 1987.

    Google Scholar 

  5. CNET: Recueil de données de fiabilité du CNET. Lannion, F: CNET, 1983.

    Google Scholar 

  6. ESA PSS-01–302: Failure rates. In print.

    Google Scholar 

  7. FARADA: Tri-service and NASA failure rate data program. Corona CA GIDEP.

    Google Scholar 

  8. Harris A.P.: Reliability and Maintainability Data for Computer, Telephone and Electronic Parts and Equipment. Ottawa: Harris-Associates, 1986.

    Google Scholar 

  9. IEE: Electronic Reliability Data — A Guide to Selected Components. London: Inst. of Electrical Engineers, 1981.

    Google Scholar 

  10. IEEE-STD 500: Reliability Data for Nuklear-Power Gen. Stat. New York a.o.: Wiley, 1984.

    Google Scholar 

  11. MIL-HDBK-217: Reliability prediction of electronic equipment. Ed. E, 1986.

    Google Scholar 

  12. RADC DSR- 3: Transistor, diode data. 1980; MDR-14: Hybrid circuit data. 1980; MDR-I5: Digit. eval. and generic failure analysis data. Vol. 1 and 2, 1980; MDR 18: Memory, LSI Data. 1982; MDR-19: Digital failure rate data. 1984; MDR 20: Linear interface data. 1984.

    Google Scholar 

  13. Siemens: SN 29 500 Failure rates of components. Zürich: Siemens AG, 1986.

    Google Scholar 

Zuverlässigkeit komplexer Strukturen, Computerprogramme

  1. Allan R.N.: An efficient algorithm for deducing the minimal cuts and reliability indices of a general network configuration. IEEE Trans. Rel. 25, (1976) 4, pp. 226–232.

    Article  Google Scholar 

  2. Arunkumar a.o.: Enumeration of all minimal cut-sets for a node pair in a graph. IEEE Trans. Rel. 28, (1979) 1, pp. 51–55.

    Article  Google Scholar 

  3. Barisal V.K.: Minimal pathsets and minimal cutsets using search techniques. Microel. and Rel. 22, (1982) 6, pp. 1067–1075.

    Google Scholar 

  4. Barlow R.E., Proschan F.: Mathematical Theory of Reliability. New York a.o.: Wiley, 1965; Statistical Theory of Reliability and Life Testing. New York a.o.: Holt, Rinehart and Winston, 1975.

    Google Scholar 

  5. Bavuso S.J., Martensen A.L.: A fourth generation reliability predictor. Proc. Ann. Rel. and Maint. Symp., 1988, pp. 11–16.

    Google Scholar 

  6. Bernet R.: Rechnergestützte Berechnung der vorausgesagten Zuverlässigkeit. Diplomarbeit am Institut für Elektronik der ETH Zürich, 1987; CARP - a program system to calculate the predicted reliability. 6th Int. Conf. on Rel. and Maint., Strasbourg, Oct. 3–7, 1988 to appear.

    Google Scholar 

  7. pp. 53–56; Bollinger R.C.: Strict consecutive-k-out-of-n: F systems. IEEE Trans. Rel., 34 (1985) 1, pp. 50–52.

    Google Scholar 

  8. Butler D.A.: Bounding the reliability of multistate systems. Op. Research, 30 (1982), pp. 530–544.

    Article  Google Scholar 

  9. Chiang D.T. a.o.: Reliability of consecutive-k-out-of-n: F System. IEEE Trans. Rel., 30 (1981) 1, pp. 87–89.

    Article  Google Scholar 

  10. Dhillon B.S., Rayapati S.N.: Common-cause failures in repairable systems. Proc. Ann. Rel. and Maint. Symp., 1988, pp. 283–289.

    Google Scholar 

  11. El-Neweihi E. a.o.: Multistate reliability models - A survey. 1978, NTIS (AD/A055111).

    Google Scholar 

  12. Feo T.: PAFT F77, Program for the analysis of fault trees. IEEE Trans. Rel., 35 (1986) 1, pp. 48–50.

    Article  Google Scholar 

  13. Fleming J.L.: RELCOMP–A computer program for calculating system reliability and MTBF. IEEE Trans. Rel., 20 (1971) 3, pp. 102–107.

    Article  Google Scholar 

  14. Frey H. Computerorientierte Methodik der Systemzuverlässikeits-und Sicherheitsanalyse. Dissertation Nr. 5244 an der ETH Zürich, 1973.

    Google Scholar 

  15. Furrer F.J.: Fehlerkorrigierende Block-Codierung für die Datenübertragung. Basel u.a.: Birkhäuser, 1981.

    Google Scholar 

  16. Garibba S. a.o.: Efficient construction of minimal cut sets from fault trees. IEEE Trans. Rel. 26 (1977) 2, pp. 88–94.

    Article  Google Scholar 

  17. Heidtmann K.D.: Inverting paths and cuts of 2-state systems. IEEE Trans. Rel., 32 (1983) 5, pp. 469–471 and 474.

    Google Scholar 

  18. Höfle-Isophording U.: Zuverlässigkeitsrechnung - Einführung in ihren Methoden. Berlin u.a.: Springer-Verlag, 1978.

    Google Scholar 

  19. Hudson J.C. a.o.: Reliability theory for multistate systems with multistate components. Microel. and Rel., 22 (1982) 1, pp. 1–7.

    Article  Google Scholar 

  20. Hura G.S.: A Petri net approach to enumerate all system success paths for reliability evaluation of a complex system; Petri net approach to the analysis of a structured program; Petri net as a modeling tool. Microel. & Rel., 22 (1982) 3, pp. 427–439; Enumeration of all simple paths in a directed graph using Petri net–a systematic approach. Microel. and Rel., 23 (1983) 1, pp. 157–159; Simplification of Boolean functions through Petri nets On the determination of all tie sets and minimal cut sets between any two nodes of a graph through Petri nets. Microel. and Rel., 23 (1983) 3, pp. 467–475; Enumeration of all 2-trees in a graph through Petri nets. Microel. & Rel., 23 (1983) 5, pp. 851–853.

    Google Scholar 

  21. IEEE: Special issue on Network reliability. IEEE Trans. Rel., 35 (1986) 3, pp. 227–278.

    Google Scholar 

  22. Johnson L.E.: Eigenvalue-Eigenvector solutions for two general Markov models in reliability. Microel. and Rel., 26 (1986) 5, pp. 917–933.

    Article  Google Scholar 

  23. Johnson S.C., Butler R.W.: Automated generation of reliability models. Proc. Ann. Rel. and Maint. Symp., 1988, pp. 17–22.

    Google Scholar 

  24. Kanderhag L.: Eigenvalue approach for computing the reliability of Markov systems. IEEE Trans. Rel., 27 (1978) 5, pp. 337–340.

    Article  Google Scholar 

  25. Kenett R., Pollak M.: A semi-parametric approach to testing for reliability growth, with application to software systems. IEEE Trans. Rel., 35 (1986) 3, pp. 304–311.

    Article  Google Scholar 

  26. Kitchin J.F.: Practical Markov modeling for reliability analysis. Proc. Ann. Rel. and Maint. Symp., 1988, pp. 290–296.

    Google Scholar 

  27. Klion J. a.o. RADC oracle. Proc. Ann. Rel. and Maint. Symp., 1981, pp. 81–84.

    Google Scholar 

  28. Kohlas J.: Zuverlässigkeit und Verfügbarkeit. Stuttgart: Teubner, 1987.

    Google Scholar 

  29. Laviron A. a.o.: ESCAP–a new and cheap system for complex reliability analysis and computation. IEEE Trans. Rel., 31 (1982) 4, pp. 339–349.

    Article  Google Scholar 

  30. Lin P.M. a.o.: A new algorithm for symbolic system reliability analysis. IEEE Trans. Rel., 25 (1976) 1, pp. 2–15.

    Article  Google Scholar 

  31. Locks M.O.: Recent developments in computing of system-reliability. IEEE Trans. Rel., 34 (1985) 5, pp. 425–436.

    Article  Google Scholar 

  32. Magee D. a.o.: RESIN, a desktop-computer program for finding cut-sets. IEEE Trans. Rel., 30 (1981) 5, pp. 407–410.

    Article  Google Scholar 

  33. Misra R.B.: An algorithm for enumerating all simple paths in a communication network. Micro-el. and Rel., 19 (1979), pp. 363–366.

    Article  Google Scholar 

  34. Nahman J.M.: Approximate expressions for steady state reliability indexes of Markov systems. IEEE Trans. Rel., 35 (1986) 3, pp. 338–343.

    Article  Google Scholar 

  35. Nakashima K. a.o.: An efficient bottom-up algorithm for enumerating minimal cut sets of fault trees. IEEE Trans. Rel., 28 (1979) 5, pp. 353–357.

    Article  Google Scholar 

  36. NASA CR-1127: Practical reliability. Vol. 2: Computation. 1968, NTIS.

    Google Scholar 

  37. Pasquier J.: IRAP3–An interactive program for reliability analysis. OR Spektrum, (1982) 4, pp. 161–170.

    Google Scholar 

  38. Polyak D.G.: Increasing the accuracy of simulation of queueing systems. Eng. Cybernetics, (1970) 4, pp. 687–695.

    Google Scholar 

  39. Preuss W., Kossow A., Kirchner H., Dietl W.: Bestimmung der Zuverlässigkeit von konsekutiven k-aus-n: F Netzwerken. Wissenschaftliche Beiträge, (1985) 3, S. 14–16.

    Google Scholar 

  40. pp. 82–100; A new algorithm for the reliability analysis of multi-terminal-networks. IEEE Trans. Rel., 30 (1981) 4, pp. 325–334.

    Google Scholar 

  41. Schneeweiss W.: Zuverlässigkeits-Sy.temtheorie. Köln: Datakontext, 1980.

    Google Scholar 

  42. Schneeweiss W.: The failure frequency of systems with dependent components. IEEE Trans. Rel., 35 (1986) 5, pp. 512–517.

    Article  Google Scholar 

  43. Störmer H.: Mathematische Theorie der Zuverlässigkeit. München: Oldenbourg, 1970.

    Google Scholar 

Zuverlässigkeit mechanischer Betrachtungseinheiten

  1. AFCIQ: Guide d’ évaluation de fiabilité en mécanique. Paris - la Défense: AFNOR, 1981.

    Google Scholar 

  2. Allianz: Handbuch der Schadenverhütung. Berlin u.a.: VDI-Verlag, 1984, 3. Aufl.

    Google Scholar 

  3. ARINC: Development of test and analysis plan for mechanical component reliability. Naval Weapons Eng. Support Activity, Washington, 1974, NTIS (AD918726).

    Google Scholar 

  4. Barer R.D.: Why Metals Fail. New York a.o.: Gordon and Breach, 1974, 3rd ed.

    Google Scholar 

  5. Bertsche B., Lechner G.: Verbesserte Berechnung der Systemlebensdauer von Produkten des Maschinenbaus. Konstruktion, 38 (1986) 8, S. 315–321.

    Google Scholar 

  6. Birolini A., Hubka V. (Hgb.): Zuverlässigkeit technischer Systeme. Int. Workshop. 14.-15. 3. 1988, Wislikofen. Zürich: Heurista, 1988.

    Google Scholar 

  7. Bocchi W.J.: Predicting mechanical reliability. Proc. Ann. Rel. and Maint. Symp., 1981, pp. 33–37.

    Google Scholar 

  8. Bogdanoff J.L., Kozin F.: Probabilistic Models for Cumulative Damage. New York a.o.: Wiley, 1985.

    Google Scholar 

  9. Canterbury J. a.o.: Comparative analysis of mechanical reliability determination techniques. Naval Weapons Eng. Support Activity, Washington, 1976, NTIS (AD/AO35347).

    Google Scholar 

  10. Carter A.D.S.: Mechanical Reliability. London a.o.: Macmillan, 1986, 2nd ed.

    Google Scholar 

  11. Collins J.A.: Failure of Materials in Mechanical Design. New York a.o.: Wiley, 1981.

    Google Scholar 

  12. Hangen E.B.: Probabilistic Mechanical Design. New York a.o.: Wiley, 1980.

    Google Scholar 

  13. Hertzberg R.W: Deformation and Fracture Mechanics of Engineering Materials. New York a.o.: Wiley, 1983, 2nd ed.

    Google Scholar 

  14. Hutchings F.R., Unterweiser P.M.: Failure Analysis. Metals Park, Ohio: Amer. Soc., for Metals, 1981.

    Google Scholar 

  15. Kagur K.C., Lamberson L.: Reliability in Engineering Design. New York a.o.: Wiley, 1977.

    Google Scholar 

  16. Kececioglu D.: Mechanical reliability, probabilistic design for reliability, design for reliability. Tucson (AZ): University of Arizona, 1982.

    Google Scholar 

  17. Kutz M. (Ed.): Mechanical Engineers’ Handbook. New York a.o.: Wiley, 1986.

    Google Scholar 

  18. Rabon L.M.: Mechanical systems reliability testing. Proc. Ann. Rel. and Maint. Symp., 1981, pp. 278–282.

    Google Scholar 

  19. Ratnaparkhi M.V., Park W.J.: Lognormal distribution–model for fatigue life and residual strength of composite materials. IEEE Trans. Rel., 35 (1986) 3, pp. 312–315.

    Article  Google Scholar 

  20. Raze J.D. a.o.: Reliability models for mechanical equipment. Proc. Ann. Rel. and Maint. Symp., 1986, pp. 322–326; 1988, pp. 127–131.

    Google Scholar 

  21. Rossi M.J.: Nonelectronic parts reliability data. NPRD-3, RADC, 1985.

    Google Scholar 

  22. Smith C.O.: Manufacturing/design defects. Amer. Soc. Mech. Eng. 86-WADE-14, 1986, pp. 1–6.

    Google Scholar 

  23. Thaft-Christensen P., Baker: Structural Reliability Theory and its Applications. Berlin a.o.: Springer-Verlag, 1982.

    Book  Google Scholar 

  24. Thompson B.R., Thompson D.O.: Ultrasonic in nondestructive evaluation. Proc. IEEE, Nov. 1985, pp. 1716–1755.

    Google Scholar 

Ausfallartenanalysen

  1. Collins J.A. a.o.: Helicopter failure modes and corrective actions. Proc. Ann. Rel. and Maint. Symp., 1975, pp. 504–508.

    Google Scholar 

  2. DIN 25419: Störfallablaufanalyse, Teil 1, 1977; Teil 2, 1979. 25424: Fehlerbaumanalyse, Methode und Bildzeichen, 1981. 25448: Ausfalleffektanalyse, 1980.

    Google Scholar 

  3. ESA PSS-01–303: Failure modes, effects and criticality analysis. In preparation.

    Google Scholar 

  4. Hall F.M. a.o.: Hardware/Software FMECA. Proc. Ann. Rel. and Maint. Symp., 1983, pp. 320–327.

    Google Scholar 

  5. IEEE Trans. Rel.: Special issue on nuclear system reliability and safety, 25 (1976), pp. 130–202.

    Google Scholar 

  6. Jackson T.: Integration of sneak circuit analysis with FMEA. Proc. Ann. Rel. and Maint. Symp., 1986, pp. 408–414.

    Google Scholar 

  7. Jordan W.E.: Failure modes, effects and criticality analyses. Nat. Symposium. 1972. pp. 30–37.

    Google Scholar 

  8. MIL-STD-1629: Procedures for performing a failure mode, effects and criticality analysis. Ed. A, 1980.

    Google Scholar 

  9. Sevcik F.: Current and future concepts in FMEA. Proc. Ann. Rel. and Maint. Symp., 1981, pp. 414–421.

    Google Scholar 

  10. Stamenkovic B., Holovac S.: Failure modes, effects and criticality analysis: the basic concepts and applications. Int. Summer Seminar Dubrovnik, Sept. 21–25, 1987, 22 p.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Eidgenössische Technische Hochschule (ETH), Zürich, Schweiz

    Dr. sc. techn. Dipl. El.-Ing. Alessandro Birolini (Professor für Zuverlässigkeitstechnik)

Authors
  1. Dr. sc. techn. Dipl. El.-Ing. Alessandro Birolini
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 1988 Springer-Verlag Berlin Heidelberg

About this chapter

Cite this chapter

Birolini, A. (1988). Zuverlässigkeitsanalysen in der Entwicklungsphase. In: Qualität und Zuverlässigkeit technischer Systeme. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-09608-6_2

Download citation

  • DOI: https://doi.org/10.1007/978-3-662-09608-6_2

  • Publisher Name: Springer, Berlin, Heidelberg

  • Print ISBN: 978-3-662-09609-3

  • Online ISBN: 978-3-662-09608-6

  • eBook Packages: Springer Book Archive

Publish with us

Policies and ethics

Search

Navigation