Zusammenfassung
Seitdem Fähr- und Ro-Ro-Schiffe gebaut werden, stellt sich die Frage nach dem Tragverhalten der Decks unter Radlasten, da der Be- und Entladevorgang überwiegend mit Gabelstaplern oder/und Trailern stattfindet.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
American Bureau of Shipping: Rules for Building and Classing Steel Vessels 199o, Section 16.6 Decks
Det norske Veritas: Rules for the Construction and Classification of Steel Ships 1993, Part 5, Chapter 2, Section 4
Germanischer Lloyd: Vorschriften für Klassifikation und Bau von stählernen Seeschiffen Ausgabe 1992, Band 1 Abschnitt 7: Decks
Lloyds Register of Shipping: Rules and Regulations for the Classification of Ships 1993 Chapter 9, Section 3
Smith,W.: Investigations into the Use of Fork Lift Tracks on Board Ship Report N2 27, Lloyd’s Register of Shipping, London, 1961
Panel HS-4 of the Hull Structure Committee: Design of Deck Plating and Hatch Cover Plating for Fork Lift Truck Loading The Society of Naval Architects and Marine Engineers, New York, Technical and Research Bulletin N2 2–14
Böckenhauer, M., Schultz, H. G.: Zur Dimensionierung von Plattenfeldern bei Beanspruchung durch Einzellasten (Gabelstapler) Schiff und Hafen, Heft 11/1965, 17. Jahrgang, S. 860–864
Timoshenko, S., Woinowsky-Krieger, S.: Theory of Plates and Shells McGraw-Hill book company, 1959
Haslum, K.: Design of Deck Plates Subject to Large Wheel Loads European Shipbuilding N° 1, Vol. XIX, 1970, S. 2–8
Pelikan, W., Eßlinger, M.: Die Stahlfahrbahn, Berechnung und Konstruktion MAN Forschungsbericht Nr. 7/1957
Bunting, S., Briscoe, P. H., Subbiah, J., Glenton: Flat Plates Subject to Localized Loads Trans. R.I.N.A. Vol. 114, 1972, S. 499–506
Johansen, K.W.: Yield Line Theory Cement and Concrete Association, London 1962, Translated from Brudlinieteorier Copenhagen 1943
Hopkins, H. G., Prager, W.: The Load Carrying Capacities of Circular Plates J. Mech. Phys. Solids 2, 1953 S. 1–13
Onat, E. T., Haythornthwaite, R. M., Providence, R. I.: The Load-Carrying Capacitiy of Circular Plates at Large Deflection J. of App. Mech., Mar. 1956 S. 49–55
Foulkes, J., Onat, E. T.: Report of Static Tests of Circular Mild Steel Plates Brown University Technical Report OOR 3172/3, 1955
Prager,W: An Introduction to Plasticity Reading Mass., Addison-Wesley, 1959.
Wood, R. H.: Plastic and Elastic Design of Slabs and Plates Ronald Press 1961
Sawczuk,A., Jäger, T.: Grenztragfähigkeits-Theorie der Platten Springer Verlag 1963
Rzhanitsyn,A. R.: The design of Plates and Shells by the kinematical Method of Limit EquilibriumSème Congr. Mécanique Appliqué, (Bruxelles 1956), Université de Bruxelles, 6, 1957, S. 331-343
Clarkson, J.: A New Approach to the Design of Plates to Withstand Lateral Pressure Trans. INA, Vol. 98, 1956, S. 443–463
Clarkson, J.: Uniform Pressure Tests on Plates with Edges Free to Slide Inwards Trans. INA, Vol. 104, 1962, S. 67–8o
Sawczuk,A.: Large Deflections of Rigid-Plastic Plates Proc. nth Int. Congr. Appl. Mech., 1964, S. 617
Sawczuk,A.: On Initiation of the Membrance Action in Rigid-Plastic Plates Proc. Journal de Mécanique, Vol. 3, N2 1, 1964
Jones, N., Uran, T. O., Tekin, S. A: The Dynamic Plastic Behaviour of Fully Clamped Rectangular Plates Int. J. Solids Structures, 1970, Vol. 6, 5. 1499–1512
Jones, N.: The Theoretical Study of the Dynamic Behaviour of Beams and Plates with Finite-Deflections Int. J. Solids Structures, 1971, Vol. 7, 5. 1007–1029
Jones, N., Walters, R. M.: Large Deflections of Rectangular Plates Journal of Ship Research June 1971, S. 164–171
Hooke, R., Rawlings, B.: An experimental Investigation of the Behaviour of Clamped, Rectangular, Mild Steel Plates Subjected to Uniform Transverse Pressure Proceedings Institution of Civil Engineers, Vol. 42, January 1969, S. 75–103
Jones,N.: Damage Estimates for Plating of Ships and Marine Vehicles PRADS—International Symposium on Practical Design in Shippbilding, Tokyo, Oct. 1977 S. 121–128
Kling, M.: Large Deflections of Rectangular Plates Subject to Concentrated Loads Master’s Thesis of Ocean Engineering, M.I.T., Cambridge, Mass., June 1980
von Karman, T.: Festigkeitsprobleme im Maschinenbau Enzyklopädie der Mathematischen Wissenschaften 15/4,1910
Weiß, S.: Gleichmäßig innerhalb eines Rechtecks symmetrisch belastete, elastisch eingespannte Platten bei großen Durchbiegungen FDS Bericht Nr. 6/1969
Sandvik, P. C.: Deck Plates subject to Large Wheel Loads Norwegian Inst. of Technology, Division of Ship Structures, Report SK/M 28, Univ. of Trondheim, January, 1974
Det norske Veritas: Rules for the Construction and Classification of Steel Ships 1974
Soreide, T., Amdahl, J., Kavlie, D.: Nonlinear Analysis and Design of Stiffend Plates Subject to Lateral Loads PRADS—International Symposium on Practical Design in Shippbilding, Tokyo, Oct. 1977 S. 95–102
Jackson, R. I., Frieze, P.A.: Design of Deck Structures under Wheel Loads Trans. R.I.N.A. Vol. 123, 1980, 5.119-144
Hughes, O. E: Design of Laterally Loaded Plating Under Concentrated Loads J. Ship. Res., 27(4), 1983, S. 31-34
Hughes, O. E: Design of Laterally Loaded Plating Under Uniform Loads J. Ship. Res., 25 (2), 1981, S. 77–89
Jones N.: Influence of In-Plane Displacements at the Boundaries of Rigid-Plastic Beams and Plates Int. J. Mech. Sci., Vol. 15, 1973 S. 547
Hooke, R.: Post-Elastic Deflection Prediction of Plates Proceedings ASCE, Vol. 96, N° ST4, 1970, S. 757–771
Leger, R.: Vergleich von zwei alternativen Ro-Ro- Zwischendeckskonstruktionen mit Hilfe einer FE-Rechnung Diplomarbeit Uni. Hannover, 1985
Lehmann, E.: Cold Formed Ship Structures 6th WEMT Symposium STG, Travemünde, 1987
Wagner, P.: Kreuzungsbauwerk Mitte in Fulda: Erste Eisenbahnbrücke mit Trapez-Längssteifen, Stahlbau 1/1985, S. 1–8
Weitz, E R.: Neuzeitliche Gesichtspunkte im schweißenden Brückenbau Der Stahlbau 3/1974, S. 72–81
Stahlbauhandbuch: Stahlbau-Verlags-GmbH. Köln, 1982
McCormik, C.W.: The NASTRAN Programm for Structure Analysis Advances in Computational Methods in Structural Mechanics and Design edited by J.T. Oden, R.W. Clough and Y.Yamamoto UAH Press, 1972, S. 551–571
User’s Manual: MSC/NASTRAN Version 65A The MacNeal-Schwendler Corporation, Nov 1985
Mathies, H., Strang, G.: The Solution of Finite Element Equations Massachusetts Institute of Technology Report Report for NSF (MCS76–22289), 1979
Germanischer Lloyd: Vorschriften für Klassifikation und Bau von stählernen Seeschiffen Ausgabe 1992, Band i Abschnitt 2, B.2
Reckling, K. R.: Plastizitätstheorie und ihre Anwendung auf Festigkeitsprobleme Springer-Verlag, Berlin, 1967
Ramm, E., Weimar, K.: Traglasten unversteifter Trägerstegbleche unter konzentrierten Lasten Stahlbau 4/1986, S. 113–118
Granholm, C.A.: Proving av balkar med extremt tunt liv. Rapport 202, Institutionen för Byggnadteknik, Chalmers Tekniska Högskola, Göteborg, 1960–1961
Bergfelt,A.: Studies and Tests on Slender Plate Girders without Stiffeners (Shear Strength and Local Web Crippling) IABSE Coll., Proc. S. 7o (Rep. WC, Vol. n), London,1971
Roberts, T. M.: Patch Loading on Plate Girders Published in: Plated Structures, Stability and Strength. Edited by Narayanan, R. Applied Science Publishers, London and New York, 1983
Herzog, M.: Die Krüppellast von Blechträger-und Walzprofilstegen Stahlbau 3/86, S. 87–88
Verbund für Schiffbau und Meerstechnik (VSM): Festigkeitsstandard des Deutschen Schiffbaus (FS) 1990
Det norske Veritas: Hull Surveys Local Structures 1993.
The Society of Naval Architects of Japan: Japanese Shippbuilding Quality Standard 1979.
Alberts, E.: Validierung von Traglastberechnungen nach der Methode der Finiten Elemente Institut für Schiffbau der Universität Hamburg, Bericht Nr. 556, Sept. 1995
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Lehmann, E., Zhang, L. (1998). Platten. In: Nichtlineares Verhalten von ausgesteiften Tragwerken. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-58264-6_3
Download citation
DOI: https://doi.org/10.1007/978-3-642-58264-6_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63520-5
Online ISBN: 978-3-642-58264-6
eBook Packages: Springer Book Archive