Abstract
The control structure of gasoline engines follows by considering the main components, the main control tasks and a resulting control-oriented block diagram of direct injection (DI) gasoline engines (or spark-ignition (SI) engines) as described in the introduction chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Alfieri E, Amstutz A, Guzzella L (2009) Gain-scheduled model-based feedback control of the air/fuel ratio in diesel engines. Control Engineering Practice – CEP 17:1417–1425
Alt B (2010) Modellbasierte Regelung ausgewählte Komponenten im Antreibsstrangeines Kraftfahrzeuges mit Ottomotor. Diss. Universität der BundeswehrMünchen. Fortschr.-Ber. VDI Reihe 8, 729. VDI Verlag, Düsseldorf
Alt M, Quarg J, Bargende M (2002) Gasoline direct injection - potentials of homogeneous and stratified operation (in German). In: 11th Aachener Kolloquium Fahrzeug- und Motorentechnik, Aachen, Germany
Alt M, Grebe U, Dulzo J, Chang MF (2008) Closed loop combustion control for HCCI. In: 8. Int. Stuttgarter Symposium, Stuttgart
Anastasia C, Pestana G (1987) A cylinder pressure sensor for closed-loop engine control. In: SAE Technical paper Series, Warrendale, PA, 870288
Ault B, Jones V, Powell J, Franklin G (1994) Adaptive air-fuel ratio control of a spark ignition engine. In: SAE Technical paper Series, Warrendale, PA, 940373
Babic G, Berner H, Bargende M (2010) Operating strategies on hcci combustion. In: 10. Internationales Stuttgarter Symposium, pp 543–561
Bargende M (1995a) Most optimal location of 50 percent mass fraction burned and automatic knock detection components for automatic optimization of SI engine calibrations. MTZ worldwide 56(10)
Bargende M (1995b) Schwerpunkt-Kriterium und automatische Klingelerkennung. Motortechnische Zeitschrift - MTZ 56(10):632–638
van Basshuysen R, Schäfer F (2004) Internal combustion engine handbook: basics, components, systems, and perspectives. SAE International, Warrendale
Baunach T, Schänzelin K, Diehl L (2006) Sauberes Abgas durch Keramiksensoren. Physik Journal 5(5):33–338
BEG (2009) Bosch Engineering GmbH. Training notes Momentenstruktur. ME(D)17. Robert Bosch Engineering GmbH, Abstatt, Germany
Bernard L, Ferrari A, Micelli D (2009) Electro-hydraulic valve control with MultiAirtechnology. ATZ autotechnology 9(6):32–37
Borger M, Haussner M, Houben H, Marto A, Pechhold F (2004) Pressure sensor glow-plug for diesel engines. MTZ worldwide 65
Brömmel A, Rombach M, Wickerath B, Weinecke T, Durand JM, Armenio G, Squarcini R, Gibat T (2010) Electrification powers pump innovations. MTZ extra pp 89–96
Brüstle C, Schwarzenthal D (1998) The two-in-one engine - Porsche’s variable valve system (VVS). In: SAE Technical paper Series, Warrendale, PA, 980766
Bücker C (2008) Betriebsstrategien zur kontrollierten Selbstzündung von Ottomotoren. Dissertation. RWTH Aachen, Aachen
Chiang CJ, Stefanopoulou A, Jankovic M (2007) Nonlinear observer-based control of load transitions in homogeneous charge compression ignition engines. IEEE Trans on Control Systems Technology 15(3):438–448
Cortona K (2003) Thermomanagement for fuel consumption reduction. Doctoral thesis. ETH Zürich, Zürich
Denger D, Mischker K (2004) The electro-hydraulic valvetrain system. MTZ worldwide 65(12):10–13
Dorey R, Stuart G (1994) Self-tuning control applied to the in-vehicle calibration of a spark ignition engine. In: Proc. of the 3rd Conf. on Control Applications, Glasgow, vol 1, pp 121–126
Flierl R, Kairies D (2006) Comparison of fully variable mechanical and electromechanical valve trains. In: AUTOREG 2006, VDI, Wiesloch, Germany, vol VDI Berichte 1931, pp 345–358
Gäfvert M, Årzén KE, Pedersen L (2000) Simple linear feedback and extremum seeking control of GDI engines. In: Proceedings of Seoul 2000 FISITA World Automotive Congress, Seoul, Korea
Genster A, Stephan W (2004) Always at the correct temperature – thermal management with electric coolant pump. MTZ worldwide 65(11):6–7
Gerhardt J, Benninger N, Hess W (1997) Torque-oriented functional structure of an electronic engine management as a new basis of drivetrain systems (in German). In: 6th Aachener Kolloquium Fahrzeug- und Motorentechnik, Aachen, Germany
Gerhardt J, Höninger H, Bischof H (1998) A new approach to functional and software structure for engine management systems - Bosch ME97. In: SAE 980801, Aachen, Germany
Glaser I, Powell JD (1981) Optimal closed-loop spark control of an automotive engine. Tech. rep
Günther M (2004) Untersuchungen der Eigenschaften und Kontrollmöglichkeiten der homogene kompressionsgezündeten Verbrennung von Ottokraftstoff. Diss. Universität Karlsruhe. Karlsruhe
Guzzella L, Onder C (2010) Introduction to modeling and control of internal combustion engine systems, 2nd edn. Springer, Berlin
Haas M, Rauch M (2010) Electro-hydraulic fully variable valve train system. MTZ worldwide 71
Hellemans A, Landreve L, Venzel S, Walker E (2011) In-cylinder pressure sensor. MTZ worldwide 72(10):42–47
Herden W, Küsell M (1994) A new combustion prressure sensor for advanced engine management. In: SAE Technical paper Series, Warrendale, PA, 940379
Hess W (2003) Drehmomentorientierte Struktur der Motorsteuerungen. In: Isermann R (ed) Modellgestützte Steuerung, Regelung und Diagnose von Verbrennungsmotoren, Springer, Berlin
Heywood JB (1988) Internal combustion engine fundamentals. McGraw-Hill, New York
Hockel K (1981) Einfluss der zeitlichen Energieumsetzung auf den Wirkungsgrad beim Ottomotor. Automobil-Industrie 3:315–320
Hofmann D, Heinkle M, Heinrich D, Husch F, Zein T, Brandt M (2011) Scavening, a challenge for engine control (in German). In: AUTOREG 2011, VDI, Wiesloch, Germany, vol VDI Berichte 2135, pp 75–85
Hohenberg G (1982) Der Verbrennungsverlauf. In: 4th Wiener Motorensymposium. Fortschr.-Ber. VDI Reihe 6, Nr. 103, VDI, Düsseldorf, pp 71–88
Hohenberg G, Dolt R (1993) Ein Konzept zur adaptiven Steuerung/Regelung von Verbrennungsmotoren unter Verwendung eines Online-Brennverlaufsrechners. In: Fachtagung Integrierte mechanisch-elektronische Systeme, VDI, Düsseldorf, Darmstadt, Germany, vol Fortschr.-Ber. VDI Reihe 12 Nr. 179, pp 58–69
Hrovat D, Sun J (1997) Models and control methodologies for IC engine idle speed control design. Control Engineering Practice – CEP 8(4):1093–1100
Inoue T, Matsushita S, Nakanishi K, Okano H (1993) Toyota lean combustion system - the third generation system. In: SAE Technical paper Series, Warrendale, PA, 930873
Isermann R (2015) Combustion-engine diagnosis. To be published. Springer, Berlin
Isermann R, Müller N (2001) Nonlinear identification and adaptive control of combustion engines. In: IFAC Workshop on adaptation and learning in control and signal processing, Como, Italy
Isermann R, Müller N (2003) Design of computer-controlled combustion engines. Mechatronics 13:1067–1089
Isermann R, Münchhof M (2011) Identification of dynamic systems. Springer, Berlin
Jost O (2000) Einsatz optischer Zylinderdrucksensoren zur Steuerung, Regelung und Ãœberwachung von Pkw-Dieselmotoren mit Direkteinspritzung. In: 20. Tagung. Elektronik im Kraftfahrzeug, Haus der Technik
Kawamura A, Haneyoshi T, Hoft R (1988) Deadbeat controlled PWM inverter with parameter estimation using only voltage sensor. IEEE Trans on Power Electronics 3(2):118–125
Keller P, Wenzel W, Becker M, Roby J (2010) Hybrid coolant pumps with electrical and mechanical drive. ATZ autotechnology 10(6):52–56
Kiencke U, Nielsen L (eds) (2000) Automotive control systems. For engine, driveline and vehicle. Springer, Berlin
Kimmich F, Schwarte A, Isermann R (2001) Model-based fault detection for diesel engines. In: Aachen Colloquium, Automobile and Engine Technology, Aachen, Germany
Klaus B, Drexler G, Eder T (2005) Further development of BMW’s fully-variable vavle control system Valvetronic. MTZ worldwide 66(9):10–13
Klimstra J (1985) The optimum combustion phasing angle-a convenient engine tuning criterion. In: SAE Technical paper Series, Warrendale, PA, 852090
Klüting M, Flierl R, Grudno A, Luttermann C (1999) Drosselfreie Laststeuerung mit vollvariablen Ventiltrieben. MTZ-Motortechnische Zeitschrift 60(7-8):476–485
Köhler E, Flierl R (2012) Verbrennungsmotoren, 6th edn. Vieweg, Wiesbaden
Kohlhase M (2011) Brennraumdruckbasiertes Motormanagement für Otto- und Dieselmotoren zur Verbrauchs- und Emissionsreduktion. Dissertation Technische Universität Darmstadt. Fortschr.-Ber. VDI Reihe 12, 743, VDI Verlag, Düsseldorf
Kohlhase M, Isermann R (2009) Self-tuning extremum value control based on cylincer pressure sensors for direct injection spark ignition engines (in German). at - Automatisierungstechnik 57(1):23–31
Konrad H, Krämer G (2002) The development of the control functions for the bmw valvetronic engines (in german). at - Automatisierungstechnik pp 360–367
Krebber-Hortmann K, Köster A, Tönnesmann A, Brunetti C (2013) Possibilities for fuel consumption through electrical camshaft actuation. MTZ – Motortechnische Zeitschrift 73(7-8):854–859
Kulzer A, Fischer W, Karrelmeyer R, Saver C, Wintrich T, Benninger K (2009) Homogeneous charge compression ignition on gasoline engines. MTZ worldwide 70(1):32–57
Lamparski C (2007) Bedarfsgerechte Ölversorgnung: Regelpumpen im Serieneinsatz. In: BergM(ed) Ölkreislauf von Verbrennungsmotoren II, expert verlag, Renningen, pp 83–108
Landenfeld T, Gerhardt J, Küsell M (2002) Gasoline direct injection - an attractive concept for emission reduction (in German). In: 11th Aachener Kolloquium Fahrzeug- und Motorentechnik, Aachen, Germany, pp 177–197
Liebl J, Klüting M, Poggel J, Missy S (2001a) Der neue BMW Vierzylinder- Ottomotor mit Valvetronic. Motortechnische Zeitschrift – MTZ 62(7-8):570–579
Liebl J, Munk F, Hohenner H, Ludwig B (2001b) Die Steuerung der neuen BMW VALVETRONIC Motoren. Motortechnische Zeitschrift – MTZ 62(7-8):516–527
Loh R, Lu M (2001) Crank-angle domain modeling and optimal tracking control for automotive engine idle speed. In: IFAC Conferenc on New Technologies for Computer Control, Hong Kong, pp 247–258
Martin G (2009) Variable Ventiltriebe für Verbrennungsmotoren. ATZ extra (11):204–218
Matekunas F (1986) Engine combustion control with ignition timing by pressure ratio management. Patent US 4,622,939
Meisberger D, Albert C, Bourdon K (1998) Die neue Motorsteuerung ME7.2 von Bosch für den BMW V8-Motor. Motortechnische Zeitschrift – MTZ 59(12):826– 834
Merker G, Schwarz C, Stiesch G, Otto F (2006) Simulating combustion. Springer, Berlin
Moriwaki J, Murai H, Kameshima A (2003) Glow plug with comubstion pressure sensor. In: SAE 2003 World Congress and Exhibition, Detroit, MI, 2003-01-0707
Müller N (2003) Adaptive engine control for gasoline engines using combustion pressure sensors (in German). Fortschr.-Ber. VDI Reihe 12, 545. VDI Verlag, Düsseldorf
Pestana G (1989) Engine control methods using combustion pressure feedback. In: SAE Technical paper Series, Warrendale, PA, 890758
Powell D (1993) Engine control using cylinder pressure: past, present, and future. Journal of Dynamic Systems, Measurement and Control 115:343–350
Powell J, Fekete N, Chang C (1998) Observer-based air-fuel ratio control. IEEE Control Systems Magazine 18:72–83
Rausen D, Stefanopoulou A, Kang JM, Eng J, Kuo TW (2005) A mean-value model for control of homogeneous charge compression ignition (HCCI) engines. J of Dyn Meas and Control 127:355–362
Ravi N, Roelle M, Chang C, Gerdes J (2009) Physical modeling and control of a multi-cylinder HCCI engine. In: Proceedings of the ASME 2009 Dynamic Systems and Control Conference, DSCC2009, Hollywood, California, USA
Ravi N, Liao HH, Jungkunz A, Widd A, Gerdes J (2012) Model predictive control of HCCI using variable valve actuation and fuel injection. Control Engineering Practice 20(4):421–430
Robert Bosch GmbH (2004) Ottomotor-Management. Vieweg, Wiesbaden
Robert Bosch GmbH (ed) (2007) Automotive electrics, automotive electronics. J. Wiley, Chichester, UK
Robert Bosch GmbH (ed) (2011) Automotive Handbook, 8th edn. Bentley publishers, Cambridge
Rohe-Brandenburger K (1986) Einfluss des Zündwinkels auf den Wirkungsgradeines Mehrzylinder-Ottomotors im instationären Betrieb. Fortschr.-Ber. VDI Reihe 12, 79, VDI Verlag, Düsseldorf
Rupp D, Onder C, Guzzella L (2008) Iterative adaptive air/fuel ratio control. In: Proceedings IFAC Symposium in Advances in Automotive Control, Seascape Resort Aptos, CA, USA, pp 609–615
Salber W, Kemper H, Staay F, Esch T (2000) The electro-mechanical valve train–a system module for future powertrain concepts. MTZ worldwide 61(12):826–826
Sauter W, Hensel S, Spicher U, Schubert A, Schiessl R (2008) Controlled autoignition-reduction of engine emissions in gasoline engines. MTZ worldwide 69(1):40–47
Schneider F, Lettmann M (2008) Variable valve timing for any engine concept. MTZ worldwide 69(5):27–28
Schramm H, Wurst B (1977) Vorrichtung zur Extremwert-Regelung bei Kraftmaschinen. Patent DE 2739568C2. Robert Bosch GmbH
Schulz T, Kulzer A (2006) Überblick und Bewertung variabler Ventiltriebe. In: AUTOREG 2006, VDI, Wiesloch, Germany, vol VDI-Berichte 1931, pp 339–344
Scotson P, Wellstead R (1990) Self-tuning optimization of spark ignition automotive engines. In: IEEE Control Magazine, vol 10, pp 94–101
Sellnau M, Matekunas F, Battiston P, Chang CF, Lancaster D (2000) Cylinder pressure- based engine control using pressure-ratio-management and low-cost nonintrusive cylinder pressure sensors. In: SAE Technical paper series, Warrendale, PA, 2000-01-0932
Shaver G, Gerdes J, Roelle M (2004) Physics-based closed-loop control of phasing, peak pressure and work output in HCCI engines utilizing variable valve actuation. In: American Control Conference, vol 1, pp 150–155
Spicher U (ed) (2007) Direkteinspritzung im Ottomotor III. expert Verlag, Renningen
Stiesch G (2003) Modeling Engine Spray and Combustion Processes. Springer, Berlin
Straky H (1996) Modellgestützter Funktionsentwurf für Kfz-Stellglieder; Regelung der elektromechanischen Ventiltriebaktorik und Fehlerdiagnose der Bremssystemhydraulik. Dissertation Technische Universität Darmstadt. Fortschr.-Ber. VDI Reihe 12, 546. VDI Verlag, Düsseldorf
Stuhler H, Kruse T (2003) Parametrierung der Motorsteuerungen. In: Isermann R (ed) Modellgestützte Steuerung, Regelung und Diagnose von Verbrennungsmotoren, Springer, Berlin, chap 3
Teetz C, Bergmann D, Schneemann A, Eichmeier J (2012) MTU HCCI engine with low raw emissions. MTZ worldwide 73(9):4–9
Truscott A, Noble A, Akoachere A, Müller R, Hart M, Krötz G, Richter C, Cavalloni C, Gnielka M (2001) In-cylinder pressure sensing and model-based control of a spark ignition engine. In: Proceedings. JSAE Annual Congress, 36-01, pp 5–8
Tschöke H, Schultalbers M, Gottschalk W, Huthöfer E, Jordan A (2011) Thermodynamic optimizatioon criteria for the ignition time of modern SI engines. MTZ worldwide 72(1):52–57
Unger H, Schwarz C, Schneider J, Koch F (2008) The valvetronic experience from seven years of mass production. MTZ worldwide 69(7-8):30–37
Vogt M, Müller N, Isermann R (2004) Online adaptation of grid-based look-up tables using a fast regressor technique. Transactions of the ASME 126(Dec):732–739
Voigt D (2003) Kraftstoffverbrauchsvorteile durch Regelölpumpen. Motortechnische Zeitschrift - MTZ 64(12)
Voigt D (2010) Motorschmierung bei PKW-Motoren. In: Eberan-Eberhorst C (ed) Schmierung von Verbrennungsmotoren, expert verlag, Renningen, pp 140–151
Wellstead R, Scotson P (1990) Self-tuning extremum control. In: IEE-Proceedings Control Theory and Applications, vol 137, pp 165–175
Willand J, Jelitto C, Jakobs J (2008) The GCI combustion process from Volkswagen. MTZ worldwide 69(4):56–61
Willand J, Schintzel K, Hoffmeyer H (2009) The potential of turbo-charged gasoline engines with spray guided direct injection. MTZ worldwide 70(2):12–18
Willimowski M (2003) Verbrennungsdiagnose von Ottomotoren mittels Abgasdruck und Ionenstrom. Dissertation Technische Universität Darmstadt. Shaker Verlag, Aachen
Wöckel N, Leimbröck M (2007) Optimierter Ölkreislauf der neuen Porsche V8- Motoren mit variabler Ölpumpe. In: Berg M (ed) Ölkreislauf von Verbrennungsmotoren II, expert verlag, Renningen, pp 2–22
Won M, Choi S, Hedrick J (1998) Air-to-fuel ratio control of si engines using gaussian network sliding control. IEEE Control System Technology 6(5):678–687
Yildiz Y, Annaswamy A, Yanakiev D, Kolmanovsky I (2010) Spark ignition engine fuel-to-air control: an adaptive control approach. Control Engineering Practice – CEP 18:1369–1378
Zarske R (1988) Dynamisches Steuerkonzept für Einspritzung und Zündung von Ottomotoren. Braunschweig
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Isermann, R. (2014). Control of Gasoline Engines. In: Engine Modeling and Control. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-39934-3_7
Download citation
DOI: https://doi.org/10.1007/978-3-642-39934-3_7
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-39933-6
Online ISBN: 978-3-642-39934-3
eBook Packages: EngineeringEngineering (R0)