Abstract
The FLP PCDU supplies an unregulated power bus with voltage levels between 19 V and 25 V as explained later in Chap. 8. The three data handling boards of the OBC, namely the Processor-Board, I/OBoard and CCSDS-Board, require a steady voltage of approx. 3.3 V. Thus, the main task for the power conversion of the OBC Power Supply Board—or OBC Power-Board for short—is to establish a steady onversion of the unregulated FLP main power bus to the required 3.3 V, and within the range as specified for every board by their manufacturers. Furthermore it provides the routing and conversion of certain OBC internal interfaces to the housing outside respectively in inverse direction.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
The 5Â V converter example is depicted here since the supplier does not provide an according diagram for the selected converter models of the MGDS series.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Witt, R., Hartling, M. (2013). The OBC Power-Boards. In: Eickhoff, J. (eds) A Combined Data and Power Management Infrastructure. Springer Aerospace Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-35557-8_5
Download citation
DOI: https://doi.org/10.1007/978-3-642-35557-8_5
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-35556-1
Online ISBN: 978-3-642-35557-8
eBook Packages: EngineeringEngineering (R0)