Abstract
This paper aims at presenting a model based compensation command law developed in order to enhance the transparency of haptic interfaces for low mass objects manipulations in virtual environments. After presenting the context and related work of the study, the model based compensation command law is developed and implemented on a 6-dofs haptic interface. Uncertainties of the model (friction coefficients) are then tuned thanks to an experimental protocol enabling a subjective comparison between real and virtual manipulations of a low mass object. Results of this experimentation are presented and discussed. The compensation of friction on the first and second axes of the haptic interface showed significant improvement of both realism and perceived load. A short conclusion opens perspectives to this work at the end of the paper. Such a work has the potential to enhance the fidelity of interaction for applications.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Nguyen, H., Pontonnier, C., Hilt, S., Duval, T., Dumont, G.: VR-based operating modes and metaphors for collaborative ergonomic design of industrial workstations. J. Multimodal User Interfaces 11(1), 97–111 (2017)
Mavrikios, D., Karabatsou, V., Pappas, M., Chryssolouris, G.: An efficient approach to human motion modeling for the verification of human-centric product design and manufacturing in virtual environments. Robot. Comput.-Integr. Manuf. 23(5), 533–543 (2007)
Pappas, M., Karabatsou, V., Mavrikios, D., Chryssolouris, G.: Ergonomic evaluation of virtual assembly tasks. In: Cunha, P.F., Maropoulos, P.G. (eds.) Digital Enterprise Technology, pp. 511–518. Springer, Heidelberg (2007). https://doi.org/10.1007/978-0-387-49864-5_60
Pontonnier, C., Samani, A., Badawi, M., Madeleine, P., Dumont, G.: Assessing the ability of a VR-based assembly task simulation to evaluate physicalrisk factors. IEEE Trans. Vis. Comput. Graph. 20(5), 664–674 (2014)
Samani, A., Pontonnier, C., Dumont, G., Madeleine, P.: Kinematic synergy in a real and a virtual simulated assembly task. In: 19th Triennal Congress of the International Ergonomics Association (IEA 2015) (2015)
Samani, A., Pontonnier, C., Dumont, G., Madeleine, P.: Shoulder kinematics and spatial pattern of trapezius electromyographic activity in real and virtual environments. PLoS ONE 10(3), e0116211 (2015)
Pontonnier, C., Dumont, G., Samani, A., Madeleine, P., Badawi, M.: Designing and evaluating a workstation in real and virtual environment: toward virtual reality based ergonomic design sessions. J. Multimodal User Interfaces 8(2), 199–208 (2014)
Sagardia, M., Hulin, T.: Multimodal evaluation of the differences between real and virtual assemblies. IEEE Trans. Haptics PP(99), 1 (2017)
Baser, O., Gurocak, H., Konukseven, E.I.: Hybrid control algorithm to improve both stable impedance range and transparency in haptic devices. Mechatronics 23(1), 121–134 (2013)
Bernstein, N.L., Lawrence, D.A., Pao, L.Y.: Friction modeling and compensation for haptic interfaces. In: First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. World Haptics Conference, pp. 290–295, March 2005
Lyapunov, A.M.: The general problem of the stability of motion. Int. J. Control 55(3), 531–534 (1992)
Dang, Q.V.: Conception et commande d’une interface haptique à retour d’effort pour la CAO. Ph.D. thesis, Université de Valenciennes et du Hainaut-Cambresis (2013)
Colgate, J.E., Schenkel, G.: Passivity of a class of sampled-data systems: application to haptic interfaces. In: American Control Conference, vol. 3, pp. 3236–3240, June 1994
Colgate, J.E., Brown, J.M.: Factors affecting the Z-width of a haptic display. In: Proceedings of the 1994 IEEE International Conference on Robotics and Automation, pp. 3205–3210. IEEE (1994)
Mehling, J.S., Colgate, J.E., Peshkin, M.A.: Increasing the impedance range of a haptic display by adding electrical damping. In: First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, World Haptics 2005, pp. 257–262. IEEE (2005)
Weir, D.W., Colgate, J.E., Peshkin, M.A.: Measuring and increasing Z-width with active electrical damping. In: Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, Haptics 2008, pp. 169–175. IEEE (2008)
Hannaford, B., Ryu, J.H.: Time-domain passivity control of haptic interfaces. IEEE Trans. Robot. Autom. 18(1), 1–10 (2002)
Ryu, J.H., Kim, Y.S., Hannaford, B.: Sampled-and continuous-time passivity and stability of virtual environments. IEEE Trans. Robot. 20(4), 772–776 (2004)
Ryu, J.H., Preusche, C., Hannaford, B., Hirzinger, G.: Time domain passivity control with reference energy following. IEEE Trans. Control Syst. Technol. 13(5), 737–742 (2005)
Lim, Y.A., Ahn, H.S., Ryu, J.: Analogue input shaper for haptic interfaces. IET Control Theory Appl. 3(12), 1553–1564 (2009)
Lee, K., Lee, D.Y.: Adjusting output-limiter for stable haptic rendering in virtual environments. IEEE Trans. Control Syst. Technol. 17(4), 768–779 (2009)
Franken, M., Stramigioli, S., Reilink, R., Secchi, C., Macchelli, A.: Bridging the gap between passivity and transparency. Robotics Science and Systems (2009)
Franken, M., Stramigioli, S., Misra, S., Secchi, C., Macchelli, A.: Bilateral telemanipulation with time delays: a two-layer approach combining passivity and transparency. IEEE Trans. Robot. 27(4), 741–756 (2011)
McJunkin, S.T.: Transparency improvement for haptic interfaces. Ph.D. thesis, Rice University (2007)
Lee, H.K., Shin, M.H., Chung, M.J.: Adaptive controller of master-slave systems for transparent teleoperation. In: Proceedings of the 8th International Conference on Advanced Robotics, ICAR 1997, pp. 1021–1026. IEEE (1997)
Carignan, C.R., Cleary, K.R.: Closed-loop force control for haptic simulation of virtual environments. The Electronic Journal of Haptics Research (2000)
Frisoli, A., Sotgiu, E., Avizzano, C., Checcacci, D., Bergamasco, M.: Force-based impedance control of a haptic master system for teleoperation. Sens. Rev. 24(1), 42–50 (2004)
Baser, O., Konukseven, E.I.: Utilization of motor current based torque feedback to improve the transparency of haptic interfaces. Mech. Mach. Theory 52, 78–93 (2012)
Baser, O., Konukseven, E.I., Gurocak, H.: Transparency improvement in haptic devices with a torque compensator using motor current. In: Isokoski, P., Springare, J. (eds.) EuroHaptics 2012. LNCS, vol. 7282, pp. 37–46. Springer, Heidelberg (2012). https://doi.org/10.1007/978-3-642-31401-8_4
Kee, D., Lee, I.: Relationships between subjective and objective measures in assessing postural stresses. Appl. Ergon. 43(2), 277–282 (2012). Special Section on Product Comfort
Hu, B., Ma, L., Zhang, W., Salvendy, G., Chablat, D., Bennis, F.: Predicting real-world ergonomic measurements by simulation in a virtual environment. Int. J. Ind. Ergon. 41(1), 64–71 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Hilt, S., Pontonnier, C., Dumont, G. (2017). Model Based Compensation for Low Mass Objects Haptic Manipulation in Virtual Environments. In: Barbic, J., D'Cruz, M., Latoschik, M., Slater, M., Bourdot, P. (eds) Virtual Reality and Augmented Reality. EuroVR 2017. Lecture Notes in Computer Science(), vol 10700. Springer, Cham. https://doi.org/10.1007/978-3-319-72323-5_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-72323-5_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72322-8
Online ISBN: 978-3-319-72323-5
eBook Packages: Computer ScienceComputer Science (R0)