Abstract
Reduced order modeling of geometrically nonlinear structures has gained significant attention over the recent years due to its ability to reduce detailed finite element models into computationally efficient yet accurate models. The reduced order models (ROMs) generated can be used to compute the nonlinear normal modes (NNMs) of a structure which serve as a metric to determine the accuracy of the reduced order models; if the NNMs are reproduced accurately then the response to various inputs can also be shown to be accurate. A majority of work has been focused on flat structures while relatively few works have focused on curved structures, those that have, suggested that these structures may introduce complexities to the system. This paper will provide a criteria for selecting basis vectors and load amplitudes for generating accurate ROMs for a curved beam, where softening nonlinearity and snap through are significant. Two methods will be considered: implicit condensation and expansion (ICE) and enforced displacements (ED). A framework for mode selection, load scaling factors and model sensitivity testing will be presented in order to accurately compute the NNMs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gordon, R.W., Hollkamp, J.J.: Reduced-order models for acoustic response prediction. Air Force Research Laboratory (AFRL), Wright-Patterson Air Force Base, OH AFRL-RB-WP-TR-2011-3040 (2011)
Tzong, G., Liguore, S.L.: Verification studies on hypersonic structure thermal/acoustic response and life prediction methods. Presented at the 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (2013)
Perez, R., Wang, X.Q., Mignolet, M.P.: Nonintrusive structural dynamic reduced order modeling for large deformations: enhancements for complex structures. J. Comput. Nonlinear Dyn. 9, 031008-031008-12 (2014)
Kuether, R., Allen, M.: Validation of nonlinear reduced order models with time integration targeted at nonlinear normal modes. In: Nonlinear Dynamics, vol. 1. Conference Proceedings of the Society for Experimental Mechanics Series, pp. 363–375 (2016)
Vakakis, A.F.: Non-linear normal modes (NNMs) and their applications in vibration theory: an overview. Mech. Syst. Signal Process. 11, 3–22 (1997)
Hollkamp, J.J., Gordon, R.W., Spottswood, S.M.: Nonlinear modal models for sonic fatigue response prediction: a comparison of methods. J. Sound Vib. 284, 1145–63 (2005)
Mignolet, M.P., Przekop, A., Rizzi, S.A., Spottswood, S.M.: A review of indirect/non-intrusive reduced order modeling of nonlinear geometric structures. J. Sound Vib. 332, 2437–2460 (2013)
Muravyov, A.A., Rizzi, S.A.: Determination of nonlinear stiffness with application to random vibration of geometrically nonlinear structures. Comput. Struct. 81, 1513–1523 (2003)
Kuether, R., Deaner, B., Hollkamp, J., Allen, M.: Evaluation of geometrically nonlinear reduced-order models with nonlinear normal modes. AIAA J. 53, 1–13 (2015)
Hollkamp, J.J., Gordon, R.W., Spottswood, S.M.: Nonlinear sonic fatigue response prediction from finite element modal models: a comparison with experiments. In: Proceedings of the 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (2003)
Gordon, R.W., Hollkamp, J.J.: Reduced-order modeling of the random response of curved beams using implicit condensation. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, RI (2006)
Acknowledgements
The authors also acknowledge Joseph Hollkamp from the Air Force Research Laboratory’s Structural Sciences Center, for providing the Abaqus interface that was used in this work.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
VanDamme, C.I., Allen, M.S. (2016). Using NNMs to Evaluate Reduced Order Models of Curved Beam. In: De Clerck, J., Epp, D. (eds) Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics & Laser Vibrometry, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-30084-9_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-30084-9_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-30083-2
Online ISBN: 978-3-319-30084-9
eBook Packages: EngineeringEngineering (R0)