Abstract
This chapter provides an introduction to the resolution and sharpness requirements for a camera monitor system = CMS (Camera Monitor System) to replace the traditional optical rear-view mirrors. It provides information on how the requirements are translated from what a driver could observe as the minimum angular detail through a mirror to what a driver can expect to observe on a monitor of a CMS. The minimum requirements are derived from the visual acuity of a licensed driver and the magnification of type approved mirrors. Further, this chapter provides guidance on measurement procedure and practical evaluation of a CMS. This chapter is aimed to help the reader to understand the minimum requirements determined by regulation and understand the respective measurement procedure of resolution and sharpness. It clarifies the difference between the units used in definition of the resolution requirements of the CMS and the resolution units used in a standard resolution measurement according to ISO 12233:2014. The evaluation procedure describes a method to verify how many distinguishable line widths are observable within the width in the orientation of interest. It provides a guide to evaluate the system directly on a partially captured image on the CMS monitor, independent of the output image aspect ratio or magnification aspect ratio.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ISO 16505:2015, Road vehicles—Ergonomic and performance aspects of Camera Monitor Systems—Requirements and test procedures
ISO 12233:2014, Photography—Electronic still picture imaging—Resolution and spatial frequency responses
“Digital Capture Resolution Measurements” provided by IS&T, the Society for Imaging Science and Technology. http://www.imaging.org/ist/resources/standards/Digital_Camera_Resolution_Tools.cfm. Accessed 28 Sept 2015
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Oba, E. (2016). Resolution and Sharpness Requirements for CMS. In: Terzis, A. (eds) Handbook of Camera Monitor Systems. Augmented Vision and Reality, vol 5. Springer, Cham. https://doi.org/10.1007/978-3-319-29611-1_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-29611-1_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-29609-8
Online ISBN: 978-3-319-29611-1
eBook Packages: EngineeringEngineering (R0)