Abstract
In this work, a comparison between results of a panel method and a RANS solver is made for a horizontal axis marine current turbine in uniform inflow conditions. The panel method calculations were made with panel code PROPAN (Baltazar, On the modelling of the potential flow about wings and marine propellers using a boundary element method. Ph.D. thesis, Instituto Superior Técnico, 2008). A vortex pitch wake alignment model is considered for the blade wake. The RANS calculations were carried out with RANS code ReFRESCO (http://www.marin.nl/web/Facilities-Tools/CFD/ReFRESCO.htm). A comparison of the blade pressure distributions, wake geometry and thrust and power coefficients is made. A reasonable to good agreement of the blade distribution and turbine forces is seen between the codes. Comparison of the numerical calculations with experimental performance data available in the literature is also presented. In general, the trend of the thrust and power coefficients is well captured by the numerical methods.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Actually, a negative thrust force or drag.
References
Bahaj AS, Batten WMJ, McCann G (2007) Experimental verifications of numerical predictions for the hydrodynamic performance of horizontal axis marine current turbines. Renew Energ 32:2479–2490
Bahaj AS, Molland AF, Chaplin JR, Batten WMJ (2007) Power and thrust measurements of marine current turbines under various hydrodynamic flow conditions in a cavitation tunnel and a towing tank. Renew Energy 32:407–426
Baltazar J (2008) On the modelling of the potential flow about wings and marine propellers using a boundary element method. Ph.D. thesis, Instituto Superior Técnico
Baltazar J, Falcão de Campos JAC (2008) Hydrodynamic analysis of a horizontal axis marine current turbine with a boundary element method. In: Proceedings of the ASME 27th international conference on offshore mechanics and arctic engineering, Estoril
Baltazar J, Falcão de Campos JAC (2009) Unsteady analysis of a horizontal axis marine current turbine in yawed inflow conditions with a panel method. In: Proceedings of the first international symposium on marine propulsors, Trondheim, pp 186–194
Baltazar J, Falcão de Campos JAC (2011) Hydrodynamic analysis of a horizontal axis marine current turbine with a boundary element method. J Offshore Mech Arct Eng 133:041304-1–041304-10
Baltazar J, Falcão de Campos JAC (2012) Prediction of sheet cavitation on marine current turbines with a boundary element method. In: Proceedings of the ASME 31st international conference on ocean, offshore and arctic engineering, Rio de Janeiro 2012:1–11
Baltazar J, Falcão de Campos JAC, Bosschers J (2012) Open-water thrust and torque predictions of a ducted propeller system with a panel method. Int J Rotating Mach Article ID 474785 2012:1–11. http://www.hindawi.com/journals/ijrm/si/196407
Eça L, Hoekstra M (2012) Verification and validation for marine applications of CFD. In: Proceedings of 29th symposium on naval hydrodynamics (ONR), Gothenburg
HEXPRESSTM (2014) http://www.numeca.com/en/products/automeshtm/hexpresstm
Khan MJ, Bhuyan G, Iqbal MT, Quaicoe JE (2009) Hydrokinetic energy conversion systems and assessment of horizontal and vertical axis turbines for river and tidal applications: a technology status review. Appl Energy 86:1823–1835
Kinnas SA (1996) Theory and numerical methods for the hydrodynamic analysis of marine propulsors. In: Advances in marine hydrodynamics, computational mechanics publications. Southampton, Boston
Klaij CM, Vuik C (2013) Simple-type preconditioners for cell-centered, colocated finite volume discretization of incompressible Reynolds-averaged Navier-Stokes equations. Int J Numer Methods Fluids 71(7):830–849
Lawson MJ, Li Y, Sale DC (2011) Development and verification of a computational fluid dynamics model of a horizontal-axis tidal current turbine. In: Proceedings of the ASME 30th international conference on ocean, offshore and arctic engineering, Rotterdam
Menter F (1994) Two-equation eddy viscosity turbulence models for engineering applications. AIAA J 32(8):1598–1605
Morino L, Kuo C-C (1974) Subsonic potential aerodynamics for complex configurations: a general theory. AIAA J 12(2):191–197
Otto W, Rijpkema D, Vaz G (2012) Viscous-flow calculations on an axial marine current turbine. In: Proceedings of the ASME 31st international conference on ocean, offshore and arctic engineering, Rio de Janeiro
ReFRESCO (2014) http://www.marin.nl/web/Facilities-Tools/CFD/ReFRESCO.htm
Vaz G, Jaouen F, Hoekstra M (2009) Free-surface viscous flow computations. Validation of URANS code FRESCO. In: Proceedings of the ASME 28th international conference on ocean, offshore and arctic engineering, Honolulu, HI
Acknowledgements
The authors acknowledge the use of MARIN code ReFRESCO in performing the current RANS computations. The authors would like to thank Prof. Luis Eça for his comments and suggestions, which helped to improve the manuscript. The authors also acknowledge the assistance of Mr. Joseph Cherroret in the numerical computations and post-processing analysis of the results.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Baltazar, J., Falcão de Campos, J.A.C. (2015). A Comparison of Panel Method and RANS Calculations for a Horizontal Axis Marine Current Turbine. In: Ferrer, E., Montlaur, A. (eds) CFD for Wind and Tidal Offshore Turbines. Springer Tracts in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-16202-7_11
Download citation
DOI: https://doi.org/10.1007/978-3-319-16202-7_11
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-16201-0
Online ISBN: 978-3-319-16202-7
eBook Packages: EngineeringEngineering (R0)