Abstract
Due to favourable mechanical and physical properties, and the potential to provide a resilient and low-carbon infrastructure, fibre-reinforced polymer (FRP) material has increasingly been used for construction of highway and pedestrian bridges. Relative low mass, low damping and low stiffness make these bridges sensitive to dynamic excitation, which may lead to discomfort of human occupants and larger dynamic amplification of stress and deformation than is encountered in structures made of traditional structural materials. Consequently, design might be governed by a vibration serviceability state. Lack of data on vibration performance of FRP structures and non-existence of a state-of-the-art vibration serviceability design guideline means that current practice is conservative, often meaning only short-span FRP bridge solutions are executed. To fully exploit the benefits of using FRP material and to extend its use beyond current practice requires a better understanding of dynamic behaviour.
The objective of this paper is to study vibration performance of bridges made with FRP components. Two FRP footbridges having main spans of 15.6 and 63.0 m are used as case studies, and vibration behaviour is critically evaluated against steel/concrete structures of comparable span lengths. Both dynamic properties of the FRP and non-FRP bridges, as well as the vibration response under dynamic excitation by pedestrians, are reported. It is shown that the FRP footbridges could exhibit one order of magnitude larger vibration response under nominally the same dynamic loads. This finding highlights the need for timely research on the in-service vibration performance of FRP bridges with the aim of developing design guidance tailored for this newest structural material.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
ASCE (2010) Pre-standard for load and resistance factor design (LRFD) of pultruded fiber polymer (FRP) structures (final). American Composites Manufacturer Association (ACMA), 9 November 2010
Keller T, Tirelli T (2004) Fatigue behaviour of adhesively connected pultruded GFRP profiles. Compos Struct 65(1):55–64
Živanović S, Pavic A, Reynolds P (2005) Vibration serviceability of footbridges under human-induced excitation: a literature review. J Sound Vib 279(1–2):1–74
British Standards Association (1978) Steel, concrete and composite bridges—part 2: specification for loads; Appendix C: vibration serviceability requirements for foot and cycle track bridges, BS 5400. British Standards Association, London
Sétra (2006) Footbridges, assessment of vibrational behaviour of footbridges under pedestrian loading, technical guide. Service d’Etudes Techniques des Routes et Autoroutes, Paris
British Standards Institution (2008) UK National Annex to Eurocode 1: actions on structures—part 2: traffic loads on bridges. NA to BS EN 1991-2:2003
Highway Agency (2005) Design of FRP bridges and highway structures. Part 17, BD 90/05
AASHTO (2008) Guide specifications for design of FRP pedestrian bridges. American Association of State Highway and Transportation Officials
Potyrala PB (2011) Use of fibre reinforced polymer composites in bridge construction. State of the art in hybrid and all-composite structures. Universitat Politecnica de Catalunya, Spain
Head PR (2001) Construction materials and technology: a look at the future. Civ Eng 144:113–118
Cadei J, Startford T (2002) The design, construction and in-service performance of the all-composite Aberfeldy footbridge. In: Proceedings of advanced polymer composites for structural applications in construction, Thomas Telford, London
Gsell D, Motavalli M (2004) Indoor cable stayed GFRP-bridge at Empa, Switzerland. In: Proceedings of the 4th international conference on advanced composite materials in bridges and structures, Calgary, 20–23 July 2004
Živanović S, Pavic A (2011) Quantification of dynamic excitation potential of pedestrian population crossing footbridges. Shock Vib 18(4):563–577
Živanović S, Diaz IM, Pavic A (2009) Influence of walking and standing crowds on structural dynamic properties. In: Proceedings of IMAC-XXVII, Orlando, 9–12 February 2009
Živanović S, Johnson RP, Dang HV, Dobric J (2013) Design and construction of a very lively bridge. In: Proceedings of IMAC-XXXI, Orange County, 11–14 February 2013
Živanović S, Pavic A, Reynolds P (2007) Probability based prediction of multimode vibration response to walking excitation. Eng Struct 29(6):942–954
Živanović S (2012) Benchmark footbridge for vibration serviceability assessment under vertical component of pedestrian load. ASCE J Struct Eng 138(10):1193–1202
Kerr SC (1998) Human induced loading on staircases. PhD Thesis, Mechanical Engineering Department, University College London, UK
Acknowledgements
We would like to acknowledge financial support from the UK Engineering and Physical Sciences Research Council (Ref no. EP/I03839X/1: Pedestrian Interaction with Lively Low-Frequency Structures and Ref no. EP/E018734/1: Human Walking and Running Forces: Novel Experimental Characterisation and Application in Civil Engineering Dynamics). The Empa bridge was built with the support of the Gebert Rüf Stiftung, the ETH Council, and the companies Fiberline S/A and Maagtechnic AG.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Živanović, S., Feltrin, G., Mottram, J.T., Brownjohn, J.M.W. (2014). Vibration Performance of Bridges Made of Fibre Reinforced Polymer. In: Catbas, F. (eds) Dynamics of Civil Structures, Volume 4. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-04546-7_18
Download citation
DOI: https://doi.org/10.1007/978-3-319-04546-7_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-04545-0
Online ISBN: 978-3-319-04546-7
eBook Packages: EngineeringEngineering (R0)