Abstract
The results of experimental researches of the work of short compressed and bent elements under the action of, respectively, longitudinal loading and bending moment are given. The influence of the normal cross-section reinforcement percentage on ultimate deformation of the most compressed concrete fiber and strength of reinforced concrete elements is established. Comparative analysis of experimental data with theoretical calculations based on deformation model with an extreme criterion was performed.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Shkurupiy, O., Lazariev, D., & Davydenko, Y. (2018). Strength design of compressed reinforced concrete elements by deformation method based on extreme criterion. International Journal of Engineering & Technology, 7(3.2), 334–338. https://doi.org/10.14419/ijet.v7i3.2.14430.
Mitrofanov, V. P. (2000). Optimization strength theory of reinforced concrete bar elements and structures with practical aspects of its use. Bygningsstatiske Meddelelser. Copenhagen: Danish Society for Structural Science and Engineering, 71(4), 73–125.
Noghabai, K. (2000). Beams of fibrous concrete in shear and bending: Experiment and model. ASCE Journal of Structural Engineering, 126, 243–251. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(243).
Bambura, A. N., & Gurkovskiy, A. B. K. (2003). postroeniyu deformatsionnoy teorii zhelezobetonnyih sterzhnevyih sistem na eksperimentalnoy osnove. Budivelni konstruktsii: zbirnyk naukovyh prats. K.: Budivelnyk. Vyp. 59. pp. 121–130.
Hwang, J.-H., Lee, D. H., Ju, H., Kim, K. S., Seo, S.-Y., & Kang, J.-W. (2013). Shear behavior models of steel fiber reinforced concrete beams modifying softened truss model approaches. Materials, 6, 4847–4867. https://doi.org/10.3390/ma6104847.
Azizov, T. N. (2008). Sposob opredeleniya granichnyih deformatsiy betona na nishodyaschey vetvi. Resursoekonomni materialy, konstruktsii, budivli ta sporudy: Zbirnyk naukovyh prats. Rivne: NUVGP. Vyp. 16. Ch. 2. pp. 3–7.
Bencardino, F., Rizzuti, L., Spadea, G., & Swamy, R. N. (2008). Stress-strain behavior of steel fiber-reinforced concrete in compression. Journal of Materials in Civil Engineering, 20, 255–263. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:3(255).
Babych, Y. M., & Zarechanskyi, O. O. (2006). Eksperymentalni doslidzhennia hnuchkykh stysnuto-zihnutykh zalizobetonnykh elementiv pry poperechnykh povtornykh navantazhenniakh riznykh rivniv. Budivelni konstruktsii: Zbirnyk naukovykh prats. K.: NDIBK. Vyp. 65. pp. 253–259.
Galinska, T., Ovsii, D, & Ovsii, M. (2018). The combining technique of calculating the sections of reinforced concrete bending elements normal to its longitudinal axis, based on the deformation model. International Journal of Engineering & Technology, 7(3.2), 123–127. https://doi.org/10.14419/ijet.v7i3.2.14387.
Mitrofanov, V. P., Shkurupiy, A. A., & Lazarev, D. N. (2007). Metodika izmereniya predelnoy deformatsii betona na szhatoy grani zhelezobetonnyih elementov. Bashtovi sporudy: Materialy, konstruktsii, tehnologii: zbirnyk naukovyh prats. Makiivka: DNABA, 6(68), 96–100.
Masiuk, G., Yushchuk, O., & Paschenko, A. (2018). Experimental investigations of the stress and strain state of continuous reinforced concrete beams under the action of low-cyclic repetitive and alternating loads. International Journal of Engineering & Technology, 7(3.2), 236–238. https://doi.org/10.14419/ijet.v7i3.2.14410.
Dovzhenko, O., & Pohribnyi, V., Karabash, L. (2018). Experimental study on the multikeyed joints of concrete and reinforced concrete elements. International Journal of Engineering & Technology, 7(3.2), 354–359. https://doi.org/10.14419/ijet.v7i3.2.14552.
Barashykov, A. I., & Zadorozhnikova, I. V. (2005). Sproshcheni rozrakhunky nesuchoi zdatnosti normalnykh pereriziv zghynalnykh zalizobetonnykh elementiv za deformatsiinoiu modelliu. Resursoekonomni materialy, konstruktsii, budivli ta sporudy: zbirnyk naukovykh prats. Rivne: NUVHP. Vyp. 12. pp. 109–115.
Zheng, L., & Wang, S. (2002). Experimental investigational the failure patterns and mechanical properties for plain concrete with crocks. Rapair, Rejuvanifion and enhancement of concrete. In Proceedings of the International Seminar held at the University of Dunolec, Scotland, UK. 5–6 Sept. 2002. London: Thomas Telford. pp. 257–266.
Krus, Y. A., & Krus, A. Y. (2007). Vliyanie rezhima nagruzheniya na ochertanie diagrammyi mehanicheskogo sostoyaniya betonu, tip i strukturu approksimiruyuschey funktsii. Kommunalnoe hozyaystvo gorodov: sbornik nauchnyih trudov. K.: Tehnika. Vyp. 76. pp. 89–95.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Lazariev, D., Avramenko, Y., Zyma, O., Pasichnyk, P. (2020). Experimental Researches of Concrete Ultimate Characteristics and Strength of Compressed and Bended Reinforced Concrete Elements. In: Onyshchenko, V., Mammadova, G., Sivitska, S., Gasimov, A. (eds) Proceedings of the 2nd International Conference on Building Innovations. ICBI 2019. Lecture Notes in Civil Engineering, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-42939-3_15
Download citation
DOI: https://doi.org/10.1007/978-3-030-42939-3_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-42938-6
Online ISBN: 978-3-030-42939-3
eBook Packages: EngineeringEngineering (R0)