Abstract
The methods and techniques described in Chap. 4 can also be applied for analysis of the fatigue data and modeling of the fatigue behavior of structural elements, such as the adhesively-bonded double-lap joints examined in this chapter. The results of an extensive experimental program concerning double-lap structural joints composed of pultruded GFRP laminates and epoxy adhesive are presented in this chapter. Experiments were performed under ambient temperature and extreme environmental conditions, with temperatures ranging from −35°C to 40°C and with 90% relative humidity. The fatigue life of the examined joints was modeled by applying S-N curve formulations and also by following the stiffness degradation modeling concept described in Chap. 4. Moreover, the previously presented genetic programming tool was used for modeling the fatigue behavior and prediction of fatigue life under different environmental conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
R.B. Gilmore, S.J. Shaw, The effect of temperature and humidity on the fatigue behavior of composite bonded joints. Composite Bonding, ASTM STP 1227, (1974)
I.A. Ashcroft, D.J. Hughes, S.J. Shaw, Adhesive bonding of fibre reinforced polymer composite materials. Assembly Autom. 20(2), 150–161 (2000)
I.A. Ashcroft, D.J. Hughes, S.J. Shaw, M.A. Wahab, A. Crocombe, Effect of temperature on the quasi-static strength and fatigue resistance of bonded composite double lap joints. J. Adhes. 75, 61–68 (2001)
J.A.M. Ferreira, P.N. Reis, J.D.M. Costa, M.O.W. Richardson, Fatigue behaviour of composite adhesive lap joints. Compos. Sci. Technol. 62(10–11), 1373–1379 (2002)
Y. Miyano, M. Nakada, R. Muki, Prediction of fatigue life of a conical shaped joint system for reinforced plastics under arbitrary frequency, load ratio and temperature. Mech. Time Depend Mat. 1, 143–159 (1997)
I. Malvade, A. Deb, P. Biswas, A. Kumar, Numerical prediction of load-displacement behaviors of adhesively bonded joints at different extension rates and temperatures. Comp. Mater. Sci. 44(4), 1208–1217 (2009)
Y. Miyano, M. Nakada, H. Kudoh, R. Muki, Prediction of tensile fatigue life for unidirectional CFRP. J. Compos. Mater. 34(7), 538–550 (2000)
A.P. Vassilopoulos, E.F. Georgopoulos, V. Dionyssopoulos, Modelling fatigue life of multidirectional GFRP laminates under constant amplitude loading with artificial neural networks. Adv. Compos. Lett. 15(2), 43–51 (2006)
A.P. Vassilopoulos, E.F. Georgopoulos, V. Dionyssopoulos, Artificial neural networks in spectrum fatigue life prediction of composite materials. Int. J. Fatigue 29(1), 20–29 (2007)
A.P. Vassilopoulos, E.F. Georgopoulos, T. Keller, Comparison of genetic programming with conventional methods for fatigue life modelling of FRP composite materials. Int. J. Fatigue 30(9), 1634–1645 (2008)
A.P. Vassilopoulos, R. Bedi, Adaptive neuro-fuzzy inference system in modelling fatigue life of multidirectional composite laminates. Comp. Mater. Sci. 43(4), 1086–1093 (2008)
A.P. Vassilopoulos, T. Keller, Modeling of the fatigue life of adhesively-bonded FRP joints with genetic programming. 17th International Conference on Composite Materials (ICCM17), Edinburgh, UK, 27–31 July (2009)
Y. Zhang, T. Keller, Progressive failure process of adhesively bonded joints composed of pultruded GFRP. Compos. Sci. Technol. 68(2), 461–470 (2008)
J. De Castro, T. Keller, Ductile double-lap joints from brittle GFRP laminates and ductile adhesives. Part I: Experimental investigation. Compos. B Eng. 29(2), 271–281 (2008)
T. Keller, T. Vallée, Adhesively bonded lap joints from pultruded GFRP profiles, Part I: Stress-strain analysis and failure modes. Compos. B Eng. 36(4), 331–340 (2005)
L.J. Hart-Smith, The key to designing durable adhesively bonded joints. Composites 25(9), 895–898 (1994)
Y. Zhang, A.P. Vassilopoulos, T. Keller, Effects of low and high temperatures on tensile behavior of adhesively-bonded GFRP joints. Compos. Struct. 92(7), 1631–1639 (2010)
J.R. Gregory, S.M. Spearing, Constituent and composite quasi-static and fatigue fracture experiments. Compos. A Appl. S. 36(5), 665–674 (2005)
T. Keller, T. Tirelli, A. Zhou, Tensile fatigue performance of pultruded glass fiber reinforced polymer profiles. Compos. Sci. Technol. 68(2), 235–245 (2005)
Y. Zhang, A.P. Vassilopoulos, T. Keller, Environmental effects on fatigue behavior of adhesively–bonded pultruded structural joints. Compos. Sci. Technol. 69(7–8), 1022–1028 (2009)
Y. Zhang, A.P. Vassilopoulos, T. Keller, Stiffness degradation and fatigue life prediction of adhesively–bonded joints for fiber–reinforced polymer composites. Int. J. Fatigue 30(10–11), 1813–1820 (2008)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer-Verlag London Limited
About this chapter
Cite this chapter
Vassilopoulos, A.P., Keller, T. (2011). Fatigue of Adhesively-Bonded GFRP Structural Joints. In: Fatigue of Fiber-reinforced Composites. Engineering Materials and Processes. Springer, London. https://doi.org/10.1007/978-1-84996-181-3_5
Download citation
DOI: https://doi.org/10.1007/978-1-84996-181-3_5
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-84996-180-6
Online ISBN: 978-1-84996-181-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)