Abstract
With the rapid development of modern industry, more and more electronic and electric products containing Printed Circuit Boards (PCBs) are produced, consumed, and discarded in our daily life. The disassembling and reuse of electronic components mounted on these discarded PCBs are meaningful to reuse the valuable electronic components, reduce the pollution to the environment, reuse the bare PCBs, and retrieve the materials of PCBs. Four evaluation principles of disassembling methods, components reutilization rate, reliability and uniformity, thermal energy consumption and environmental impact, are analyzed. Based on the analysis of the existing disassembling approach, a new method is presented, which adopts a kind of special liquor, methylphenyl silicone oil, as the medium to transmit heat to the PCBs. The ultrasonic is used in the liquor to accelerate the melting and dropping of soldering tin through ultrasonic vibrations. An experimental framework has been established. The experiment proves that the method has good performances such as high efficiency of energy utilization and high unsoldering proportion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
6 References
PAN jun-qi, LIU zhi-feng, LIU guang-fu, WANG shuwang. HUANG hai-hong, 2005, Recycling Process Assessment of Mechanical Recycling of Printed Circuit Board, Journal of Central South University of Technology (2005.10). Volume 12,Suppl.2, pg.157–161. China
Jianzhi Li, Puneet Shrivastava, Zong Gao and Hong-Chao Zhang. 2004, Printed Circuit Board Recycling State-of-the-Art Survey [A]. 2004 IEEE Transactions on Electoronics Packing Manufacturing [C]. New York, USA. January 2004:33–42
Wa Layiding, Xiang Dong, Mou Peng, Duan Guanghong, 2005, Disassembling Approaches and Quality Assurance of Electronic Components Mounted on PCBs, ISEE 2005
Knoth, R., Brandstotter, M., Kopacek, B., Kopacek, P., 2002, “Automated Disassembly of Electr(on)ic Equipment”, Proceedings of the International Symposium on Electronics and the Environment, May 6–9, 2002.
Stobbe, I., Griese, H., Potter, H., Reichl, H., Stobbe, L, 2002, Quality assured disassembly of electronic components for reuse, Proceedings of the International Symposium on Electronics and the Environment, May 6–9, 2002.
Yokoyama, S., Ikuta, Y., Iji, M., 1999. “Recycling system for printed wiring boards with mounted parts”, Proceedings. EcoDesign 1999(First International Symposium on Environmentally Conscious Design and Inverse Manufacturing)
Peng Enze, Li Jinging, 2005, Dioxin-like Chemicals Pollution and the Corresponding Measures, Industrial Safety and Environmental Protection, Volume 31,Suppl.2, pg.19–21. China
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag London Limited
About this paper
Cite this paper
Huang, H., Pan, J., Liu, Z., Song, S., Liu, G. (2007). Study on Disassembling Approaches of Electronic Components Mounted on PCBs. In: Takata, S., Umeda, Y. (eds) Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses. Springer, London. https://doi.org/10.1007/978-1-84628-935-4_46
Download citation
DOI: https://doi.org/10.1007/978-1-84628-935-4_46
Publisher Name: Springer, London
Print ISBN: 978-1-84628-934-7
Online ISBN: 978-1-84628-935-4
eBook Packages: EngineeringEngineering (R0)